BOXI Qty(1) Tire Pressure Sensor TPMS for Mercedes-Benz C E S CL CLA CLS G GL GLK Smart Fortwo A0009050030Q05 A0009050030 (Pack of 1)
BOXI Qty(1) Tire Pressure Sensor TPMS for Mercedes-Benz C E S CL CLA CLS G GL GLK Smart Fortwo A0009050030Q05 A0009050030 (Pack of 1)
About Tire Pressure Monitoring System SensorWhat is TPMS?Tire Pressure Monitoring Sensor monitors tire pressure and temperature. It helps you know the situation of four tires and prompts you to take in-time actions to prevent puncture and damage to car parts caused by flat tires. It also helps prevent flat tires, forecast leakage, reduce tire wire, prolong tire life, improve fuel efficiency and increase traffic safety. Read more Product description Tire Pressure Monitoring Sensor(TPMS) Fits as below vehicles:12-15 Mercedes C25008-15 Mercedes C30007-15 Mercedes C35008-15 Mercedes C63 AMG10-15 Mercedes CL55010-14 Mercedes CL60010-15 Mercedes CL63 AMG10-13 Mercedes CL65 AMG14 Mercedes CLA25014 Mercedes CLA45 AMG06-09 Mercedes CLK35006 Mercedes CLK50006 Mercedes CLK55 AMG07-09 Mercedes CLK550 07-09 Mercedes CLK63 AMG 12-15 Mercedes CLS550 12-15 Mercedes CLS63 AMG 14, 15 Mercedes E250 11-15 Mercedes E350 14, 15 Mercedes E400 11-15 Mercedes E550 10-15 Mercedes E63 AMG 07-08 Mercedes G500 07-11 Mercedes G55 AMG 09-15 Mercedes G550 13-15 Mercedes G63 AMG 10-15 Mercedes GL350 10-15 Mercedes GL450 10-15 Mercedes GL550 13-15 Mercedes GL63 AMG 14-15 Mercedes GLK250 10-15 Mercedes GLK350 10-15 Mercedes ML350 10-11 Mercedes ML450 10-15 Mercedes ML550 10-15 Mercedes ML63 AMG 10-12 Mercedes R350 10-13 Mercedes S400 10-15 Mercedes S550 10-13 Mercedes S600 11-15 Mercedes S63 AMG 10-13 Mercedes S65 AMG 03-15 Mercedes SL550 13-15 Mercedes SL63 AMG 13-15 Mercedes SL65 AMG 12-15 Mercedes SLK250 07-08 Mercedes SLK280 09-11 Mercedes SLK300 07-15 Mercedes SLK350 07-15 Mercedes SLK55 AMG 11-15 Mercedes SLS AMG 14-15 Mercedes Sprinter 09-15 Smart Fortwo Interchange Part Number : A0009050030Q05,A0009050130,A0009058504,A0009051804,A0009050030 Frequency: 433MHz Placement on Vehicle: Left, Right, Front, Rear Package :1 x Tire Pressure Sensor Important Notes: 1.This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool. 2.Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID,Pressure, Frequency, battery statusThe TPMS sensor matching process is: 1. Set the parking brake. 2. Turn the ignition switch to ON/RUN with the engine off. 3. Press and hold the keyless-entry fob transmitter’s LOCK and UNLOCK buttons, at the same time, for about five seconds to start the TPMS learn mode. The horn sounds twice indicating the TPMS receiver is ready and in learn mode. This can also be performed using the turn signal arm and the driver information center. 4. Starting with the left-front tire, activate the sensor by holding the TPMS tool aimed upward against the tire sidewall close to the wheel rim at the valve stem location. Press and release the activate button and wait for a horn chirp. 5. Once the horn chirp has sounded, the sensor information is learned and a turn signal will illuminate in the next location to be learned. On most models, the driver-side-front will be next. Once the learn mode has been enabled, each of the sensors’ unique identification codes can be learned. 6. When a sensor ID has been learned, the module sends a serial data message to the BCM to sound a horn chirp. This verifies the sensor has transmitted its ID and has received and learned it. The module must learn the sensor IDs in the proper sequence to determine each sensor’s location. The first learned ID is assigned to the left-front location, the second to right-front, the third to right-rear and the fourth to left-rear. The TPMS sensor matching process via DIC 1.Set the parking brake.2.Turn the ignition to ON/RUN with the engine off.3.Use the MENU button to select the Vehicle Information menu in the Driver Information Center (DIC).4.Use the thumbwheel to scroll to the Tire Pressure Menu item screen.5.Press the SET/CLR button to begin the sensor matching process. A message requesting acceptance of the process should display.6.Press the SET/CLR button again to confirm the selection. The horn sounds twice to signal the receiver is in relearn mode and the TIRE LEARNING ACTIVE message displays on the DIC screen. Read more 7.Start with the driver side front tire.8.Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor. A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.9.Repeat the procedure in Step 8 for RF/RR/LR. The horn sounds two times to indicate the sensor identification code has been matched, and the TPMS sensor matching process is no longer active. The TIRE LEARNING ACTIVE message on the DIC display screen goes off.10.Turn the ignition to LOCK/OFF. Read more
Product Features
- DIRECT REPLACEMENT: This BOXI tire pressure monitor system (TPMS) sensor is specifically engineered to match the original design and performance of the tire pressure transmitter on select vehicles.
- EXCELLENT QUALITY:Best TPMS Supplier(BOXI) use best parts and same process as OE to ensure the TPMS's reliability,durabilitiy and safety .
- NO SENSOR PROGRAMMING REQUIRED :The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle
- PROFESSIONALLY TESTED:The tire pressure monitor system (TPMS) has been 100% tested to ensure trouble-free installation and performance