BOXI Qty(1) Tire Pressure Sensor TPMS 433MHz Compatible with Wrangler Dodg-e Ram Durango Fia-t Chrysl-er Mitsubis-hi Volkswag-en 56029398AB, 68142397AA, 68241067AA, 68241067AB (Pack of 1)
BOXI Qty(1) Tire Pressure Sensor TPMS 433MHz Compatible with Wrangler Dodg-e Ram Durango Fia-t Chrysl-er Mitsubis-hi Volkswag-en 56029398AB, 68142397AA, 68241067AA, 68241067AB (Pack of 1)
BOXI is a leading manufacturer of high-quality Auto parts. The company has providing improved technology and outstanding performance solutions for domestic passenger cars, SUVs, trucks. BOXI offers a wide range of revolutionary products. Each product is tested to perform as well as the original units and in many cases to exceed the manufactures specification. About Tire Pressure Monitoring System SensorWhat is TPMS?Tire Pressure Monitoring Sensor monitors tire pressure and temperature. It helps you know the situation of four tires and prompts you to take in-time actions to prevent puncture and damage to car parts caused by flat tires. It also helps prevent flat tires, forecast leakage, reduce tire wire, prolong tire life, improve fuel efficiency and increase traffic safety. Read more Product description Tire Pressure Monitoring Sensor(TPMS) Fits as below vehicles:Chrysler 300 2012-2016 W/Rubber Stem Snap-in SensorChrysler 300 2011Chrysler Town & Country 2011-2016Dodge Challenger 2010-2016 W/Rubber Stem Snap-in SensorDodge Charger 2012-2016Dodge Charger 2010-2011 W/Rubber Stem Snap-in SensorDodge Durango 2011-2016Dodge Grand Caravan 2011-2016Dodge Journey 2011-2016Dodge Ram 4500HD 2012-2013Dodge Ram 5500HD 2012-2013Dodge Ram Series Pickup 2011-2013Dodge Ram Series Pickup 2010-2011 W/Rubber Stem Snap-in Sensor Fiat 500 all Models 2012-2016Jeep Grand Cherokee 2011-2016Jeep Wrangler 2013-2018 (433 MHZ only)Mitsubishi Lancer 2011-2013 W/Alloy WheelsMitsubishi Outlander 2011-2013 W/Alloy WheelsVolkswagen VW Routan 2011-2012Interchange Part Number : 56029398AB, 68142397AA, 68241067AA, 68241067AB, 68406537AA 5S12948 974043 974302 TX-S033RColor: BlackFrequency: 433MHzPlacement on Vehicle: Left, Right, Front, RearPackage :1 x Tire Pressure Sensor Important Notes: 1.This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool. 2.Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID,Pressure, Frequency, battery statusThe TPMS sensor matching process is: 1. Set the parking brake. 2. Turn the ignition switch to ON/RUN with the engine off. 3. Press and hold the keyless-entry fob transmitter’s LOCK and UNLOCK buttons, at the same time, for about five seconds to start the TPMS learn mode. The horn sounds twice indicating the TPMS receiver is ready and in learn mode. This can also be performed using the turn signal arm and the driver information center. 4. Starting with the left-front tire, activate the sensor by holding the TPMS tool aimed upward against the tire sidewall close to the wheel rim at the valve stem location. Press and release the activate button and wait for a horn chirp. 5. Once the horn chirp has sounded, the sensor information is learned and a turn signal will illuminate in the next location to be learned. On most models, the driver-side-front will be next. Once the learn mode has been enabled, each of the sensors’ unique identification codes can be learned. 6. When a sensor ID has been learned, the module sends a serial data message to the BCM to sound a horn chirp. This verifies the sensor has transmitted its ID and has received and learned it. The module must learn the sensor IDs in the proper sequence to determine each sensor’s location. The first learned ID is assigned to the left-front location, the second to right-front, the third to right-rear and the fourth to left-rear. The TPMS sensor matching process via DIC 1.Set the parking brake.2.Turn the ignition to ON/RUN with the engine off.3.Use the MENU button to select the Vehicle Information menu in the Driver Information Center (DIC).4.Use the thumbwheel to scroll to the Tire Pressure Menu item screen.5.Press the SET/CLR button to begin the sensor matching process. A message requesting acceptance of the process should display.6.Press the SET/CLR button again to confirm the selection. The horn sounds twice to signal the receiver is in relearn mode and the TIRE LEARNING ACTIVE message displays on the DIC screen. Read more 7.Start with the driver side front tire.8.Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor. A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.9.Repeat the procedure in Step 8 for RF/RR/LR. The horn sounds two times to indicate the sensor identification code has been matched, and the TPMS sensor matching process is no longer active. The TIRE LEARNING ACTIVE message on the DIC display screen goes off.10.Turn the ignition to LOCK/OFF. Read more
Product Features
- DIRECT REPLACEMENT: This BOXI tire pressure monitor system (TPMS) sensor is specifically engineered to match the original design and performance of the tire pressure transmitter on select vehicles.
- EXCELLENT QUALITY:Best TPMS Supplier(BOXI) use best parts and same process as OE to ensure the TPMS's reliability,durabilitiy and safety .
- NO SENSOR PROGRAMMING REQUIRED :The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle
- PROFESSIONALLY TESTED:The tire pressure monitor system (TPMS) has been 100% tested to ensure trouble-free installation and performance