VooGenzek Pack of 2 W1209 Temperature Controller Module with Housing, 12V DC Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch, with NTC Sensor Probe (Red & Blue) Temperature Controller with Housing
VooGenzek 2 pieces W1209 temperature controller module with housing, 12V DC micro digital thermostat -50-110°C electronic temperature temp control module switch, with NTC sensor probe (red & blue)
Specifications: Color: Red and Blue Temperature control mode: ON/OFF Temperature range: -50-110℃ Resolution: At a temperature of 0.1°C, the resolution is -9.9 to 99.9°C, at another temperature segment 1°C Control accuracy: 0.1 ° Hysteresis accuracy: 0.1 ° Refresh rate: 0.5 s High temperature protection: 0-110℃ Supply voltage: DC 12V Static current: ≤ 35 mA, pull-in current ≤ 65 mA Output voltage: DC 12 V Output power: 20 A relay Measuring input: NTC (10K 0.5% ) Waterproof sensor Environmental requirements: -10 ~ 60 °, humidity 20% -85% Package contents: 2 × W1209 digital temperature controller board 2 × housing 1 × screwdriver
Product Features
- Package Included: 2 W1209 Digital Temperature Controller Board, 2 Cases, 1 Screwdriver.
- Features: The temperature controller board has full machine patch, wave soldering, stable performance and good consistency; Embedded CPU chip, namely MCU, is smarter and consumes less power.
- NTC probe: The NTC probe is waterproof and can control temperature, which can control heating or cooling.
- Acrylic shell: The wood laminate shell is the clear acrylic shell. You need to carefully peel off the wood outer layer, and the outer layer is very thin.
- Tips: Long press Set to enter the menu, start at P0, press + or - to go to the next P parameter to enter, press Set to select this parameter, press + or - to select the desired value for this parameter, press Set to accept it, long press + or - = reset to default, power failure will occur Default reset, default temperature is 34.5 degrees Celsius.