RedTagCanada 2PCs ADS1115 Compatible 16 Bits 4 Channel Analog to Digital ADC PGA Converter with Programmable Gain Amplifier High Precision I2C IIC 2.0V to 5.5V for Arduino for Raspberry Pi
RedTagCanada 2PCs ADS1115 Compatible 16 Bits 4 Channel Analog to Digital ADC PGA Converter with Programmable Gain Amplifier High Precision I2C IIC 2.0V to 5.5V for Arduino for Raspberry Pi
Description
2pcs ADS1115 16 Bits 4 Channel Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision I2C IIC 2.0V to 5.5V Bits ADC Converter Development Board for Arduino and for Raspberry Pi Product Feature: Designed with precision power and low current consumption, which package is QFN-10 or MSOP-10. NTERNAL PGA up to 860 samples per second (SPS). An onboard PGA is available on the ADS1115, I2C INTERFACE: Pin-Selectable Addresses. The ADS1115 included the automatically powers down function, portable instrumentation automatically powers down after a conversion and greatly reduces current consumption during idle. For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. Simply connect GND to ground, VDD to your logic power supply and SCL/SDA to your microcontroller's I2C port and run the example code to start reading data. Product Parameter: ADC Bit rate: 16 Bit Interface Type: I2C Size: 2mm 1.5mm 0.4mm Channels: 4 Channel AN0 AN1 AN2 AN3 Input voltage: 2.0v-5.5v Channel input voltage : 0-VDD Continuous Mode: Only 150μA Single-Shot Mode: Auto Shut Down Programmable data rate: 8sps-860sps Input range programmed control, 7 types input ranges: -0.256V ~ + 0.256V, -0.512V ~ + 0.512V, -1.024V ~ + 1.024V, -2.048V ~ + 2.048V, -4.096V ~ + 4.096 V, -6.144V ~ + 6.144V I2C 7-bit addresses between 0x48-0x4B Package Including: 2 pieces of ADS1115 Analog-to- Digital Converter
Features:
- The ADS1115 is measured at high resolution and has an input multiplexer (MUX) that provides two programmble conparator differentials or four single-ended input; Four single-ended or 256mV, allowing both large and small signals to be the differential input.
- Especially a good tool for the Raspberry Pi, there is no analog GPIO pin; Easy to use I2C ADC Converter, with Programmable Gain Amplifier.
- Continuous mode: Only 150A is easy to implement, single mode: auto power off function, onboard reference and oscillator.
- High precision ADS1115 16 Bit 4 Channel Analog-to-Digital ADC Converter. Code Resource: Please get the link from the product description below. Wide supply range: 2.0V to 5.5V bits of resolution, offered in an ultra-small and leadless technology.
- PRACTICAL&PROFESSIONAL- For micro-controllers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C.
- CONFIGURED CHIP- The chip can be configured as 4 single-ended input channels, or two differential channels.
- EASY TO OPERATE- The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. you can be up to 4 ADS1115's connect.
- Single-Shot Mode: Auto Shut Down.
- Input range programmed control, 7 types input ranges: -0.256V ~ + 0.256V, -0.512V ~ + 0.512V, -1.024V ~ + 1.024V, -2.048V ~ + 2.048V, -4.096V ~ + 4.096 V, -6.144V ~ + 6.144V I2C 7-bit addresses between 0x48-0x4B