Geekworm Raspberry Pi Zero 2 W HiFi DAC HAT, X302 PCM5122 HiFi DAC Audio Card & 4-Port USB HUB Compatible with Raspberry Pi Zero 2 W / Zero W (Not Include Raspberry Pi)
Geekworm Raspberry Pi Zero 2 W HiFi DAC HAT, X302 PCM5122 HiFi DAC Audio Card & 4-Port USB HUB Compatible with Raspberry Pi Zero 2 W / Zero W (Not Include Raspberry Pi)
Description
Read more Note: The Raspberry Pi board and C296 heatsink is not included in the packing list.Since the X302 expands the Micro OTG port of the pi zero W & Zero 2W motherboard into a USB HUB, the Micro OTG port of the pi zero W & Zero 2W motherboard can no longer be used. Overview The X302 HiFi DAC for Raspberry Pi Zero 2W/Zero W adds a high-quality sound to your Raspberry Pi. It is designed for optimal sound output quality and the ideal HiFi solution for all Raspberry Pi Zero 2W & Zero W users that love music. Onboard four USB2.0 ports for easy use of USB peripherals. Easy to use & installation - The X302 connects directly to the Raspberry Pi Zero 2W & Zero W where no external cables are needed. User Manual: wiki.geekworm.com/X302 Features Ideal HiFi audio solution for Raspberry Pi Zero W & Zero 2WNot compatible with Raspberry Pi Zero WH & 2WH (Zero with Headers)(as there are Pogo Pins under the position of the pin header.)Not compatible with Raspberry Pi Zero( Raspberry Pi Zero does not have wifi module)Audiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5122)Full-HD audio – up to 24-bit/192kHz playbackDynamic range signal-to-noise ratio (SNR) up to 112dB, maximum distortion less than 0.0019%Uses the digital I2S audio signals to reduce CPU load over USB audio solutionsBuilt-in TI original high-quality headphone amplifier chip (TI TPA6133A)Uses the ultra-low-noise voltage regulatorOn-board RCA connectors - external audio equipmentOn-board 3.5mm stereo headphone jack - external headphonesOn-board four USB 2.0 Ports - No more external USB hubGain 4 USB2.0, downstream ports which offer High-Speed (480Mbps), Full- Speed (12Mbps), and Low-Speed (1.5Mbps)Connects to the Raspberry Pi via Pogo Pins - no wiring & soldering required Operating System Moode Audio PlayerOSMCOpenelecRaspbian JessieVolumioMax2PlayRopiee How to Power: Power via USB Type-C 5V In port of X302Power supply requirement: 5Vdc +/-5% , ≥3A [Recommend to use Geekworm 20W 5V 4A USB Type-C Power Adapter (B09J856PND)] How to Cool: Support to use with Geekworm C296 aluminum heatsink( B09QMBCXLB) for Raspberry Pi Zero 2 W heat dissaption. (C296 also compatible with raspberry pi zero/raspberry pi zero w by using thermal pads of different thicknesses, thermal pads for raspberry pi zero / zero w is not included.) Recommend to use with C296 aluminum alloy heatsink ( B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses. C296 heatsink or raspberry pi mother board is not included. Read more Packing List: 1 x X302 V1.0 DAC Expansion Board4 x KM2.5 x 5mm Screws Read more
Features:
- CompatibilityCompatible with Raspberry Pi Zero 2 W & Pi Zero W, Not compatible with Raspberry Pi Zero WH & 2WH (Zero with Headers) as there are Pogo Pins under the position of the pin header.
- PCM5122 HiFi DAC HAT& USB HUBAudiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5122); Full-HD audio up to 24-bit/192kHz playback; With 4-port USB HUB.
- Operating SystemSupport Volumio, Rune, OSMC, MoodeAudio, Raspbian Jessie, Openelec etc.
- Packing List1 x X302 V1.0 DAC Expansion Board; 4 x KM2.5 x 5 screws; Note: not inlcude Raspberry Pi board & power adapter.
- User ManualInstallation guide & document refer to Geekworm WiKi search X302.