fits 2005 2006 2007 2008 Honda Pilot Key Fob Remote (CWTWB1U545), Set of 2 Two
fits 2005 2006 2007 2008 Honda Pilot Key Fob Remote (CWTWB1U545), Set of 2
Color:Two Replace your lost or broken keyless entry key fob remote with a USARemote Fob.Fits P/N: 2005 2006 2007 2008 Honda PilotProgramming Instructions:Have all remotes for the vehicle on hand.Make sure all the doors and rear hatch/trunk are closed during programming.Only need to use 1 remote to get into program mode but all remotes must be programmed during the same session.Each step must be completed within 5 seconds.1. Sit in the car with all doors/trunk tightly closed2. Turn the key to the ON position, marked by "II" on the ignition bezel so the dash lights come on, then within 5 seconds press the "Lock" button on the remote for 1 second or so and release the button.3. Turn the key to the OFF position, marked by "I" on the ignition bezel - dash lights go off.4. Repeat steps 2 & 3 three more times (A total of 4 times) – each step must be done within 5 seconds of the previous step.5. Upon the 4th turning of the key to "ON", press the lock button on one remote, the locks will make a cycling sound (clunk), locks will NOT lock or unlock at this point, they will just make a noise. The system is now in programming mode. Do not turn key off.6. Within 5 seconds of entering programming mode and within 5 seconds of each other, press the lock button ON EACH remote you are programming, for a second or so and release. This step needs to be completed within 10 seconds. Each time a remote button is pushed, the locks should cycle. Up to 3 remotes can be programmed.7. Turn ignition completely off and remove the key. Step out of car and close door. The remotes should be programmed and should work. If you have a trunk/hatch release, the button for this feature needs to be held for a few seconds before the trunk/hatch will "pop".This is a replacement aftermarket part.
Product Features
- fits 2005 2006 2007 2008 Honda Pilot
- Replacement for P/N: CWTWB1U545
- Remote part is User programmable with provided step-by-step instructions. Key and transponder chip need to be programmed by a dealer/locksmith to start your car.
- Complete electronic assembly with battery
- Durable long lasting construction, easy to use