ESP32-S2 MCU WiFi Development Board with Pre-Soldered Header,2.4 GHz WiFi 240 MHz Xtensa Single-Core 32-Bit LX7 Microcontroller Support Raspberry Pi Pico Expansion Board
ESP32-S2 MCU WiFi Development Board with Pre-Soldered Header,2.4 GHz WiFi 240 MHz Xtensa Single-Core 32-Bit LX7 Microcontroller Support Raspberry Pi Pico Expansion Board
Description
Features Support Raspberry Pi Pico expansion board ecosystem to satisfy creative IoT application development Xtensa single-core 32-bit LX7 microprocessor, ESP32-S2FH4, support clock frequency up to 240 MHz Integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory Support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate USB-C connector, no more plug orientation problem On-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor and RMT (TX/RX) On-board 1.8A current high efficiency boost/buck DC-DC TPS63000 power supply IC Support a variety of low-power operating states for adjusting the optimal balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios Castellated module allows soldering direct to user-designed carrier boards Package Content ESP32-S2 Development Board with Pre-Soldered Header
Features:
- This is a ESP32-S2 MCU WiFi Development Board with Pre-Soldered Header, 240 MHz Xtensa single-core 32-bit LX7 microcontroller. 2.4 GHz WiFi development board with compact size, plenty peripheral interfaces, integrated low-power Wi-Fi System-on-Chip (SoC) and mass memory, supporting Raspberry Pi Pico expansion board ecosystem. Equipped with hardware crypto accelerator, RNG, HMAC and Digital Signature module, it can meet the security requirements of the Internet of Things.
- Support Raspberry Pi Pico expansion board ecosystem to satisfy creative IoT application development. Xtensa single-core 32-bit LX7 microprocessor, ESP32-S2FH4, support clock frequency up to 240 MHz. Integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory. Support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate.
- USB-C connector, no more plug orientation problem. On-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor and RMT (TX/RX).On-board 1.8A current high efficiency boost/buck DC-DC TPS63000 power supply IC. Castellated module allows soldering direct to user-designed carrier boards.
- Support a variety of low-power operating states for adjusting the optimal balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios. Multiple low-power operating states to satisfy power requirements in IoT, mobile devices, wearable electronics, smart home and other application scenarios, etc.