Arducam Fisheye Camera for Raspberry Pi with M12 Lens, 5MP OV5647 1080P Camera Module for Raspberry Pi 4, 3, 3B+
Arducam Fisheye Camera for Raspberry Pi with M12 Lens, 5MP OV5647 1080P Camera Module for Raspberry Pi 4, 3, 3B+
Description
The Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. Raspberry Pi NOT INCLUDED. The board itself is tiny, at around 36mm x 36mm highlight of our module is that the Lens is replaceable compared to official one, making it perfect for mobile or other applications where size and image quality are important. It connects to Raspberry Pi by way of a short ribbon cable. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi. The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. The camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system. Feature: HD Camera for Raspberry Pi Lens holder: M12x0.5 or CS Mount 5MPixel sensor Integral IR filter Max frame rate: 30fps Size: 36 x 36 mm Connection by flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector S5 on Raspberry Pi computer board The Camera Lens for Raspberry Pi Camera Board is Ls-40180 FishEye Lens Packing included: 1pcs OV5647 Camera Board with M12x0.5 mount LS-40180 Fisheye Lens 1pcs 15cm 15pin FPC cable FTP support for datasheets
Features:
- Incredible Field of View: This camera actually has a 194 degree horizontal field of view, greater than 180 degrees, and maintain the same image quality as other OV5647 based board.
- Interchangeable M12 Lens: Fits many lenses with this mount type, telephoto, NoIR, low distortion or other M12 lenses.
- Works Flawlessly: The camera can be installed on the Rasparian OS as a Raspberry Pi camera and the raspistill and raspivid terminal programs, does not have any conflicts with the Rasparian OS.
- Sensor: OV5647; Still Picture Resolution: 2592 x 1944; Frame Rate: 30fps@1080p; Integral IR filter, visible light only.
- Application: Work as an all-sky camera to watch for meteors at night, home video surveillance system, robot vision or other Raspberry Pi project.