6-Pack Tweeter Diaphragm Fit for Timpano TPT-DH2000, Replace TPT-RPDH2000 | Fit for TPT-DH2000 PRO 8 Ohm titanium dome, 51.3 mm coil ID and 83 mm frame includes 6 diaphragms for repairs or spares
6-Pack Tweeter Diaphragm Fit for Timpano TPT-DH2000, Replace TPT-RPDH2000 | Fit for TPT-DH2000 PRO 8 Ohm titanium dome, 51.3 mm coil ID and 83 mm frame includes 6 diaphragms for repairs or spares
Package Contents 6 x Tweeter Diaphragm Assemblies Each package includes six complete replacement diaphragm assemblies for multiple horn driver repairs, audio system maintenance or spare use. Compatibility Information Fit for Timpano Tempesta TPT-DH2000 and TPT-DH2000 PRO horn drivers. Replacement Part Numbers: Replace TPT-RPDH2000. Please compare the original model number, diaphragm shape, mounting holes, terminals and dimensions before ordering. TPT-RPDH2000 is the replacement diaphragm part number, not the horn driver model number. Product Specifications Impedance: 8 Ohms Voice Coil Inner Diameter: Approximately 51.3 mm Outer Frame Diameter: Approximately 83 mm Titanium Dome Depth: Approximately 10 mm Structure: Titanium dome with metal support frame Package Quantity: 6 diaphragm assemblies Note: Dimensions are approximate manual measurements. Slight measurement differences may occur. Common Replacement Situations This tweeter diaphragm is suitable for replacing a worn, blown or damaged diaphragm that may contribute to: Weak treble output Distorted sound Reduced high-frequency output Unclear or intermittent high- frequency response Replacing the damaged diaphragm may help restore normal horn driver operation without replacing the complete driver unit. Installation Steps Turn off and disconnect power from the audio equipment. Remove the compatible horn driver cover or housing. Note the original wiring position and terminal polarity. Remove the screws and damaged diaphragm assembly. Carefully clean dust or debris from the mounting surface and surrounding area. Position the replacement diaphragm and align it with the mounting holes. Reconnect the wiring to the correct terminals. Tighten the screws evenly without overtightening. Test the horn driver at low volume before returning to normal use. Follow the horn driver manufacturer’s recommended power and crossover settings. Incorrect alignment, excessive power or improper crossover settings may affect diaphragm performance. Care and Use Notes Avoid prolonged use above the recommended power level. Keep the diaphragm and driver interior away from moisture and dust. Check wiring and terminal connections if the sound becomes intermittent. Do not press or deform the titanium dome during installation. Store unused diaphragms in a clean and dry location.
Product Features
- Compatible Models and Specifications: Includes 6 tweeter diaphragms designed to fit Timpano Tempesta TPT-DH2000 and TPT-DH2000 PRO horn drivers. Replacement Part Numbers: Replace TPT-RPDH2000. Features 8 Ohm impedance, approximately 51.3 mm voice coil inner diameter, 83 mm outer frame diameter and 10 mm titanium dome depth. Compare the dimensions, frame shape, mounting holes and terminals before ordering
- Helps Address High-Frequency Problems: A replacement option for worn, blown or damaged diaphragms that may cause weak treble, distorted sound, reduced output or unclear high-frequency response. Replacing the damaged diaphragm may help restore normal operation without replacing the complete horn driver
- Titanium Dome and Metal Frame: Constructed with a titanium dome, voice coil assembly and metal support frame for normal compression driver repair use. The matching 8 Ohm configuration helps support proper operation when installed in a compatible TPT-DH2000 or TPT-DH2000 PRO driver
- Six-Piece Repair and Spare Set: The 6-piece package is suitable for repairing multiple horn drivers, maintaining multi-speaker sound systems or keeping replacement diaphragms available as spares. Each package includes six complete diaphragm assemblies
- Installation and Use Notes: Turn off and disconnect the audio equipment before installation. Remove the damaged diaphragm, clean debris from the mounting area, carefully align the replacement and reconnect the terminals. Begin testing at low volume and follow the horn driver manufacturers recommended power and crossover settings