5pcs Pre-Soldered ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board for Raspberry Pi
5pcs Pre-Soldered ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board for Raspberry Pi
ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter Specifications: ADC Bit rate: 16 Bit Interface Type: I2C Channels: 4 Channel AN0 AN1 AN2 AN3 Input voltage: 2.0v-5.5v Channel input voltage : 0-VDD Continuous Mode: Only 150μA Single-Shot Mode: Auto Shut Down Programmable data rate: 8sps-860sps Input range programmed control, 7 types input ranges: -0.256V ~ + 0.256V, -0.512V ~ + 0.512V, -1.024V ~ + 1.024V, -2.048V ~ + 2.048V, -4.096V ~ + 4.096 V, -6.144V ~ + 6.144V I2C 7-bit addresses between 0x48-0x4B The ADS1115 provides 16-bit precision at 3300 samples/second over I2C. I2C Analog-to-Digital Converter even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. Interfacing is done via I2C. Simply connect GND to ground, VDD to your logic power supply, and SCL/SDA to your microcontroller's I2C port and run the example code to start reading data. ADC Converter can help you use sensors such as, infrared or photodiodes, which provide analog values. Package Included: 5 ADS1115 16 Bit 4 Channel Analog-to-Digital ADC Converter
Product Features
- ADS1115 16 Bit Analog-to-Digital-Converter High accuracy, programmable gain amplifier (PGA), four differential input channels, and internal oscillator for a variety of measurement and control applications.
- Programmable Gain Amplifier (PGA)The gain of the input signal can be adjusted in steps of 1/2, 1/4, 1/8 or 1/16. This makes it suitable for applications with different input signals.
- Low Current ConsumptionThe ADS1115 is designed to consume very little power. In Continuous Mode, it draws a mere 150A, and in Single-Shot Mode, it intelligently enters Auto Shut-Down, ensuring minimal power usage when not actively converting analog signals.
- Wide Supply RrangeThe voltage reference of these 16 bit ADC 4 channel module ranging from 2.0V to 5.5V, compatible with Raspberry Pi and other common microcontrollers.
- ADS1115 Pre-SolderedSolderless! Pins are already attached. Ready to plug in and go.