2.23 inch OLED Display HAT Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32, 128×32 Pixels SPI I2C OLED with SSD1305 Driver
2.23 inch OLED Display HAT Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32, 128×32 Pixels SPI I2C OLED with SSD1305 Driver
Description
2.23inch OLED display HAT for Raspberry Pi, 128×32 pixels, SPI/I2C interfaceOverviewThis is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.Trying to add a control interface for your Pi? This compact display would be the ideal choice.SpecificationsDriver: SSD1305Interface: SPI / I2CDisplay size: 2.23inch diagonalDisplay color: whiteResolution: 128×32Viewing angle: >160°Power supply voltage: 3.3V/5VLogic level: 3.3VInterface VCC:3V3/5V-Power inputGND:GND-GroundDIN:MOSI-SPI data inputCLK:SCLK-SPI clock inputCS:CE0-Chip selection, low activeDC:P24-Data/Command selection (high for data, low for command)RST:P25-Reset, low activePackage Content2.23inch OLED HAT x1RPi screws pack (2pcs) x1Note:1.The interface of 2.23inch OLED HAT is default SPI interface, that is 0R resistors are soldered to SPI sides. If you want to use I2C interface, you need to solder the 0R resistors to I2C side2.If you need more resources , please contact us via Amazon message to receive the document
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Optional interfaces: SPI (default), or I2C, configured via onboard resistor
- Brings control pins Compatible with host boards like Arduino/STM32
- Comes with development resources and manual (examples Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32)
- Technical Support is provided , please contact us if you have any problem , we will reply you soon.