sparkfun

{"id":7065305972891,"title":"Analog\/Digital MUX Breakout for Arduino","handle":"analog-digital-mux-breakout-for-arduino","description":"\u003ch3\u003eAnalog\/Digital MUX Breakout for Arduino\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis is a breakout board for the very handy 16-Channel Analog\/Digital\nMultiplexer\/Demultiplexer CD74HC4067. This chip can be used to connect 16\nanalog sources (like sensors) to 5 pins on a microcontroller. 4 of the pins\nmust be digital pins, 1 pin must be an analog to digital conversion pin. This\nallows 16 sensors to operate on only 5 pins of a micro! This is a great way to\nconnect a lot of sensors to a few pins. You can also run the mux\/demux the\nother direction. One serial stream connected to the SIG pin can be piped to\nmultiple outputs. The mux\/demux also works with digital signals (like serial,\nI2C, SPI). This means you can hook up multiple serial devices (like a GPS TX\npin, and a XBee DOUT pin) to one RX pin on a microcontroller. The IC can\ncontrol analog voltages that vary across the voltage supply range. The\nbidirectional switches allow any analog or digital input to be used as an\noutput and vice-versa with a \"Break-Before-Make\" switching of 6ns at 4.5V. In\naddition, the switches have low \"on\" resistances and low \"off\" leakages.\nIncludes and enable control which when high will disable all switches to their\n\"off\" state.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e16-Channel Analog\/Digital Multiplexer\/Demultiplexer CD74HC4067\u003c\/li\u003e\n \u003cli\u003eON Resistance 70Ohms @ 4.5Vcc and 60Ohms @ 6VCC\u003c\/li\u003e\n \u003cli\u003e2V to 6V operation\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-14T16:05:57+10:00","created_at":"2021-09-14T16:05:57+10:00","vendor":"SparkFun","type":"BJT","tags":["cocoon"],"price":10300,"price_min":10300,"price_max":10300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41130147643547,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0068QD86S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Analog\/Digital MUX Breakout for Arduino","public_title":null,"options":["Default Title"],"price":10300,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"609456348041","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B0068QD86S.jpg?v=1651449058","\/\/leoforward.com\/cdn\/shop\/products\/41W0qIJ_ioL.jpg?v=1631604416","\/\/leoforward.com\/cdn\/shop\/products\/41-G6FV_79L.jpg?v=1631604416","\/\/leoforward.com\/cdn\/shop\/products\/51lUpnisDZL.jpg?v=1631604416"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B0068QD86S.jpg?v=1651449058","options":["Title"],"media":[{"alt":"Analog\/Digital MUX Breakout for Arduino - LeoForward Australia","id":29662909563117,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B0068QD86S.jpg?v=1651449058"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B0068QD86S.jpg?v=1651449058","width":500},{"alt":"Analog\/Digital MUX Breakout for Arduino - LeoForward Australia","id":24874602692763,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/41W0qIJ_ioL.jpg?v=1631604416"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/41W0qIJ_ioL.jpg?v=1631604416","width":500},{"alt":"Analog\/Digital MUX Breakout for Arduino - LeoForward Australia","id":24874602725531,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/41-G6FV_79L.jpg?v=1631604416"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/41-G6FV_79L.jpg?v=1631604416","width":500},{"alt":"Analog\/Digital MUX Breakout for Arduino - LeoForward Australia","id":24874602758299,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51lUpnisDZL.jpg?v=1631604416"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51lUpnisDZL.jpg?v=1631604416","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnalog\/Digital MUX Breakout for Arduino\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis is a breakout board for the very handy 16-Channel Analog\/Digital\nMultiplexer\/Demultiplexer CD74HC4067. This chip can be used to connect 16\nanalog sources (like sensors) to 5 pins on a microcontroller. 4 of the pins\nmust be digital pins, 1 pin must be an analog to digital conversion pin. This\nallows 16 sensors to operate on only 5 pins of a micro! This is a great way to\nconnect a lot of sensors to a few pins. You can also run the mux\/demux the\nother direction. One serial stream connected to the SIG pin can be piped to\nmultiple outputs. The mux\/demux also works with digital signals (like serial,\nI2C, SPI). This means you can hook up multiple serial devices (like a GPS TX\npin, and a XBee DOUT pin) to one RX pin on a microcontroller. The IC can\ncontrol analog voltages that vary across the voltage supply range. The\nbidirectional switches allow any analog or digital input to be used as an\noutput and vice-versa with a \"Break-Before-Make\" switching of 6ns at 4.5V. In\naddition, the switches have low \"on\" resistances and low \"off\" leakages.\nIncludes and enable control which when high will disable all switches to their\n\"off\" state.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e16-Channel Analog\/Digital Multiplexer\/Demultiplexer CD74HC4067\u003c\/li\u003e\n \u003cli\u003eON Resistance 70Ohms @ 4.5Vcc and 60Ohms @ 6VCC\u003c\/li\u003e\n \u003cli\u003e2V to 6V operation\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":8449877541101,"title":"SparkFun Load Cell Amplifier – HX711","handle":"sparkfun-load-cell-amplifier-hx711","description":"\u003ch3\u003eSparkFun Load Cell Amplifier - HX711\u003c\/h3\u003e \u003cp id=\"b\"\u003eThis small load cell amplifier is a breakout board for the HX711 IC that lets you easily read load cells to measure. By connecting the amplifier to your computer you can read the changes in the resistance of the load cell and with some calibration you can make very accurate weight measurements. This can be practical for designing your own industrial scale, process control or simple presence detection. HX711 uses a two-wire interface (clock and data) for communication. Each microcontroller's GPIO pins work and numerous libraries have been written, making it easy to read data from the HX711. Check the Hookup below for more information. Load cells with a 4 wire Wheatstone measuring bridge to connect to the HX711. These are generally color red, white, black, green, YLW. Each color corresponds to the traditional color marking of the load cells: red: excitation, the + VCC)\u003c\/p\u003e \u003ch3\u003eProduct Features\u003c\/h3\u003e \u003cul class=\"a\"\u003e \u003cli\u003eOperating voltage: 2.7 V 5 V, Quiescent current: \u0026lt; 1.5 mA\u003c\/li\u003e \u003cli\u003eSelectable 10sps or 80sps power data rate\u003c\/li\u003e \u003cli\u003eSimultaneous 50 and 60 Hz supply rejection\u003c\/li\u003e \u003cli\u003eCountry of origin:- United States\u003c\/li\u003e ul\u0026gt;\u003c\/ul\u003e","published_at":"2024-03-07T03:25:14+11:00","created_at":"2024-03-07T03:25:19+11:00","vendor":"SparkFun","type":"Pressure probes \u0026 pressure sensors","tags":["industryDE"],"price":19100,"price_min":19100,"price_max":19100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45346578399469,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"de-B00NPZ4CPG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Load Cell Amplifier – HX711","public_title":null,"options":["Default Title"],"price":19100,"weight":700,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/61VizkyZc-S.jpg?v=1709742319","\/\/leoforward.com\/cdn\/shop\/products\/51KoQUxT02L.jpg?v=1709742319","\/\/leoforward.com\/cdn\/shop\/products\/51OP2Xo4DFL.jpg?v=1709742319","\/\/leoforward.com\/cdn\/shop\/products\/51Y91cw2MML.jpg?v=1709742319"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/61VizkyZc-S.jpg?v=1709742319","options":["Title"],"media":[{"alt":" [AUSTRALIA] - SparkFun Load Cell Amplifier – HX711","id":32554628514029,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61VizkyZc-S.jpg?v=1709742319"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61VizkyZc-S.jpg?v=1709742319","width":1200},{"alt":" [AUSTRALIA] - SparkFun Load Cell Amplifier – HX711","id":32554628546797,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51KoQUxT02L.jpg?v=1709742319"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51KoQUxT02L.jpg?v=1709742319","width":500},{"alt":" [AUSTRALIA] - SparkFun Load Cell Amplifier – HX711","id":32554628579565,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51OP2Xo4DFL.jpg?v=1709742319"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51OP2Xo4DFL.jpg?v=1709742319","width":500},{"alt":" [AUSTRALIA] - SparkFun Load Cell Amplifier – HX711","id":32554628612333,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51Y91cw2MML.jpg?v=1709742319"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51Y91cw2MML.jpg?v=1709742319","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSparkFun Load Cell Amplifier - HX711\u003c\/h3\u003e \u003cp id=\"b\"\u003eThis small load cell amplifier is a breakout board for the HX711 IC that lets you easily read load cells to measure. By connecting the amplifier to your computer you can read the changes in the resistance of the load cell and with some calibration you can make very accurate weight measurements. This can be practical for designing your own industrial scale, process control or simple presence detection. HX711 uses a two-wire interface (clock and data) for communication. Each microcontroller's GPIO pins work and numerous libraries have been written, making it easy to read data from the HX711. Check the Hookup below for more information. Load cells with a 4 wire Wheatstone measuring bridge to connect to the HX711. These are generally color red, white, black, green, YLW. Each color corresponds to the traditional color marking of the load cells: red: excitation, the + VCC)\u003c\/p\u003e \u003ch3\u003eProduct Features\u003c\/h3\u003e \u003cul class=\"a\"\u003e \u003cli\u003eOperating voltage: 2.7 V 5 V, Quiescent current: \u0026lt; 1.5 mA\u003c\/li\u003e \u003cli\u003eSelectable 10sps or 80sps power data rate\u003c\/li\u003e \u003cli\u003eSimultaneous 50 and 60 Hz supply rejection\u003c\/li\u003e \u003cli\u003eCountry of origin:- United States\u003c\/li\u003e ul\u0026gt;\u003c\/ul\u003e"}

{"id":7899644821741,"title":"SparkFun Pro Micro - 3.3V\/8MHz","handle":"sparkfun-pro-micro-3-3v-8mhz","description":"\u003ch1\u003eSparkFun Pro Micro - 3.3V\/8MHz\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eHere at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re\nadding to our line-up of Arduino-compatible microcontrollers once more! The\nPro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The\nUSB transceiver inside the 32U4 allows us to add USB connectivity on-board and\ndo away with bulky external USB interface. This tiny little board does all of\nthe neat-o Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC,\n5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running\nat 8MHz and 3.3V, this board will remind you a lot of your other favorite\nArduino-compatible boards but this little guy can go just about anywhere. This\nis the 3.3V version so, as always, keep in mind the limits of system voltage\nand so forth. The lower system voltage also has its advantages, though, like\nease of use with many common 3.3V sensors. There is a voltage regulator on\nboard so it can accept voltage up to 12VDC. If you’re supplying unregulated\npower to the board, be sure to connect to the “RAW” pin on not VCC. Sparkfun's\nsmallest Arduino Compatible Board yet!\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 3.3V\/8MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins 12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-18T20:22:14+10:00","created_at":"2022-08-18T20:22:18+10:00","vendor":"SparkFun","type":"Single Board Computers","tags":["electronics"],"price":11200,"price_min":11200,"price_max":11200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43229644554477,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01B26IJAS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Pro Micro - 3.3V\/8MHz","public_title":null,"options":["Default Title"],"price":11200,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"717520028055","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/51bZYYbptJL.jpg?v=1660818138","\/\/leoforward.com\/cdn\/shop\/products\/51l8mMX3-GL.jpg?v=1660818138","\/\/leoforward.com\/cdn\/shop\/products\/51OZ4MN5MfL.jpg?v=1660818138","\/\/leoforward.com\/cdn\/shop\/products\/51Iyl2CwWGL.jpg?v=1660818138"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/51bZYYbptJL.jpg?v=1660818138","options":["Title"],"media":[{"alt":" [AUSTRALIA] - SparkFun Pro Micro - 3.3V\/8MHz","id":30287875014893,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51bZYYbptJL.jpg?v=1660818138"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51bZYYbptJL.jpg?v=1660818138","width":500},{"alt":" [AUSTRALIA] - SparkFun Pro Micro - 3.3V\/8MHz","id":30287875047661,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51l8mMX3-GL.jpg?v=1660818138"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51l8mMX3-GL.jpg?v=1660818138","width":500},{"alt":" [AUSTRALIA] - SparkFun Pro Micro - 3.3V\/8MHz","id":30287875080429,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51OZ4MN5MfL.jpg?v=1660818138"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51OZ4MN5MfL.jpg?v=1660818138","width":500},{"alt":" [AUSTRALIA] - SparkFun Pro Micro - 3.3V\/8MHz","id":30287875113197,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51Iyl2CwWGL.jpg?v=1660818138"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51Iyl2CwWGL.jpg?v=1660818138","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eSparkFun Pro Micro - 3.3V\/8MHz\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eHere at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re\nadding to our line-up of Arduino-compatible microcontrollers once more! The\nPro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The\nUSB transceiver inside the 32U4 allows us to add USB connectivity on-board and\ndo away with bulky external USB interface. This tiny little board does all of\nthe neat-o Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC,\n5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running\nat 8MHz and 3.3V, this board will remind you a lot of your other favorite\nArduino-compatible boards but this little guy can go just about anywhere. This\nis the 3.3V version so, as always, keep in mind the limits of system voltage\nand so forth. The lower system voltage also has its advantages, though, like\nease of use with many common 3.3V sensors. There is a voltage regulator on\nboard so it can accept voltage up to 12VDC. If you’re supplying unregulated\npower to the board, be sure to connect to the “RAW” pin on not VCC. Sparkfun's\nsmallest Arduino Compatible Board yet!\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 3.3V\/8MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins 12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":7912775680237,"title":"SparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE","handle":"sparkfun-pro-mini-atmega328-5v-16mhz-development-board-compatible-with-arduino-boards-and-ide","description":"\u003ch1\u003eSparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eArduino Pro Mini 328 - 5V\/16MHz It's blue! It's thin! It's\nthe Arduino Pro Mini! This is a 5V Arduino running the 16MHz bootloader. Read\nmore Read more This Pro Mini had male headers soldered into all pins, so it\ncould slot directly into a breadboard. Notice the programming header pins are\nsoldered \"upside-down\", to keep them accessible. Programming the Pro Mini. The\nPro Mini included in the assembly of a project. Read more Read more The Pro\nMini's pins surround three of the four sides. The pins on the short side are\nused for programming, they match up to the FTDI Basic Breakout. The pins on\nthe other two sides are an assortment of power and GPIO pins (just like the\nstandard Arduino). There are three different power-related pins: GND, VCC, and\nRAW. GND, obviously, is the common\/ground\/0V reference. RAW is the input\nvoltage that runs into the regulator. The voltage at this input can be\nanywhere from 3.4 to 12V. The voltage at VCC is supplied directly to the Pro\nMini, so any voltage applied to that pin should already be regulated to 3.3V.\nFour pins are actually not located on the edge of the board: A4, A5, A6 and\nA7. Each of these analog pins is labeled on the back side of the board. The\nMini packs almost as much microprocessor-punch as the regular Arduino, but\nthere are a few major hardware changes you should be aware of before you start\nadapting your project to the Mini. The first glaring hardware difference is\nthe voltage that the Mini operates at: 3.3V. Unlike the Arduino Uno, which has\nboth a 5V and 3.3V regulator on board, the Mini only has one regulator. This\nmeans that if you've got peripherals that only work at 5V, you might have to\ndo some level shifting before you hook it up to the Pro Mini (or you could go\nfor the 5V variant of the Pro Mini). Another major variation from the standard\nArduino lies in the speed at which the ATmega328 runs. The Pro Mini 3.3V runs\nat 8MHz, half the speed of an Arduino Uno. We put a slower resonator on the\nMini to ensure safe operation of the ATmega. That said, don't let the slower\nspeed scare you away from using the Mini; 8MHz is still plenty fast, and the\nMini will still be capable of controlling almost any project the Arduino Uno\ncan. Arduino Pro Mini 328 - 3.3V\/8MHz Arduino Pro Mini 328 - 5V\/16MHz SparkFun\nArduino Pro Mini Starter Kit - 3.3V\/8MHz SparkFun Arduino Pro Mini Starter Kit\n- 5V\/16MHz Voltage 3.3V 5V 3.3V 5V MHz 8 16 8 16 Kit (includes other items) ✓\n✓ Technical Specifications ATmega328 Running at 16MHz with external resonator\n(0.5% tolerance) Thin PCB 0.8mm Connection USB connection off board Supports\nAuto-Reset Regulator 5V Max Output 150mA Protected Against Over current Weight\n\u0026lt;2 grams DC input 5V up to 12V On Board LEDs Power and Status Analog Pins 8\nDigital I\/Os 14 0.7x1.3\" (18x33mm)\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATmega328 running at 16MHz with external resonator (0.5% tolerance)\u003c\/li\u003e\n\u003cli\u003eNo USB connection off board. Need FTDI board (or similar device) to program.\u003c\/li\u003e\n\u003cli\u003eSupports auto-reset\u003c\/li\u003e\n\u003cli\u003e5V regulator\u003c\/li\u003e\n\u003cli\u003eMax 150mA output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-28T07:05:48+10:00","created_at":"2022-08-28T07:05:58+10:00","vendor":"SparkFun","type":"Single Board Computers","tags":["electronics"],"price":8700,"price_min":8700,"price_max":8700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43258745454829,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B004G53J5I","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE","public_title":null,"options":["Default Title"],"price":8700,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"845156592180","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/71ijJN9ToFL.jpg?v=1661634358","\/\/leoforward.com\/cdn\/shop\/products\/81O34H_31gL.jpg?v=1661634358","\/\/leoforward.com\/cdn\/shop\/products\/7190agjd_gL.jpg?v=1661634358","\/\/leoforward.com\/cdn\/shop\/products\/71l4ZdqUIAL.jpg?v=1661634358","\/\/leoforward.com\/cdn\/shop\/products\/41fH_C3apQL.jpg?v=1661634358","\/\/leoforward.com\/cdn\/shop\/products\/51kKV4hhKzL.jpg?v=1661634358","\/\/leoforward.com\/cdn\/shop\/products\/51xUwYsby-L.jpg?v=1661634358","\/\/leoforward.com\/cdn\/shop\/products\/613Yy_FyE0L.jpg?v=1661634358"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/71ijJN9ToFL.jpg?v=1661634358","options":["Title"],"media":[{"alt":" [AUSTRALIA] - SparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE","id":30323817873645,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2251,"width":2251,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71ijJN9ToFL.jpg?v=1661634358"},"aspect_ratio":1.0,"height":2251,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71ijJN9ToFL.jpg?v=1661634358","width":2251},{"alt":" [AUSTRALIA] - SparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE","id":30323817906413,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81O34H_31gL.jpg?v=1661634358"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81O34H_31gL.jpg?v=1661634358","width":2560},{"alt":" [AUSTRALIA] - SparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE","id":30323817939181,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2529,"width":2529,"src":"\/\/leoforward.com\/cdn\/shop\/products\/7190agjd_gL.jpg?v=1661634358"},"aspect_ratio":1.0,"height":2529,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/7190agjd_gL.jpg?v=1661634358","width":2529},{"alt":" [AUSTRALIA] - SparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE","id":30323817971949,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2076,"width":2075,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71l4ZdqUIAL.jpg?v=1661634358"},"aspect_ratio":1.0,"height":2076,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71l4ZdqUIAL.jpg?v=1661634358","width":2075},{"alt":" [AUSTRALIA] - SparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE","id":30323818004717,"position":5,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/41fH_C3apQL.jpg?v=1661634358"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/41fH_C3apQL.jpg?v=1661634358","width":500},{"alt":" [AUSTRALIA] - SparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE","id":30323818037485,"position":6,"preview_image":{"aspect_ratio":1.136,"height":440,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51kKV4hhKzL.jpg?v=1661634358"},"aspect_ratio":1.136,"height":440,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51kKV4hhKzL.jpg?v=1661634358","width":500},{"alt":" [AUSTRALIA] - SparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE","id":30323818070253,"position":7,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51xUwYsby-L.jpg?v=1661634358"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51xUwYsby-L.jpg?v=1661634358","width":500},{"alt":" [AUSTRALIA] - SparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE","id":30323818103021,"position":8,"preview_image":{"aspect_ratio":1.294,"height":850,"width":1100,"src":"\/\/leoforward.com\/cdn\/shop\/products\/613Yy_FyE0L.jpg?v=1661634358"},"aspect_ratio":1.294,"height":850,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/613Yy_FyE0L.jpg?v=1661634358","width":1100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eSparkFun Pro Mini ATmega328-5V\/16MHz Development Board Compatible with Arduino Boards and IDE\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eArduino Pro Mini 328 - 5V\/16MHz It's blue! It's thin! It's\nthe Arduino Pro Mini! This is a 5V Arduino running the 16MHz bootloader. Read\nmore Read more This Pro Mini had male headers soldered into all pins, so it\ncould slot directly into a breadboard. Notice the programming header pins are\nsoldered \"upside-down\", to keep them accessible. Programming the Pro Mini. The\nPro Mini included in the assembly of a project. Read more Read more The Pro\nMini's pins surround three of the four sides. The pins on the short side are\nused for programming, they match up to the FTDI Basic Breakout. The pins on\nthe other two sides are an assortment of power and GPIO pins (just like the\nstandard Arduino). There are three different power-related pins: GND, VCC, and\nRAW. GND, obviously, is the common\/ground\/0V reference. RAW is the input\nvoltage that runs into the regulator. The voltage at this input can be\nanywhere from 3.4 to 12V. The voltage at VCC is supplied directly to the Pro\nMini, so any voltage applied to that pin should already be regulated to 3.3V.\nFour pins are actually not located on the edge of the board: A4, A5, A6 and\nA7. Each of these analog pins is labeled on the back side of the board. The\nMini packs almost as much microprocessor-punch as the regular Arduino, but\nthere are a few major hardware changes you should be aware of before you start\nadapting your project to the Mini. The first glaring hardware difference is\nthe voltage that the Mini operates at: 3.3V. Unlike the Arduino Uno, which has\nboth a 5V and 3.3V regulator on board, the Mini only has one regulator. This\nmeans that if you've got peripherals that only work at 5V, you might have to\ndo some level shifting before you hook it up to the Pro Mini (or you could go\nfor the 5V variant of the Pro Mini). Another major variation from the standard\nArduino lies in the speed at which the ATmega328 runs. The Pro Mini 3.3V runs\nat 8MHz, half the speed of an Arduino Uno. We put a slower resonator on the\nMini to ensure safe operation of the ATmega. That said, don't let the slower\nspeed scare you away from using the Mini; 8MHz is still plenty fast, and the\nMini will still be capable of controlling almost any project the Arduino Uno\ncan. Arduino Pro Mini 328 - 3.3V\/8MHz Arduino Pro Mini 328 - 5V\/16MHz SparkFun\nArduino Pro Mini Starter Kit - 3.3V\/8MHz SparkFun Arduino Pro Mini Starter Kit\n- 5V\/16MHz Voltage 3.3V 5V 3.3V 5V MHz 8 16 8 16 Kit (includes other items) ✓\n✓ Technical Specifications ATmega328 Running at 16MHz with external resonator\n(0.5% tolerance) Thin PCB 0.8mm Connection USB connection off board Supports\nAuto-Reset Regulator 5V Max Output 150mA Protected Against Over current Weight\n\u0026lt;2 grams DC input 5V up to 12V On Board LEDs Power and Status Analog Pins 8\nDigital I\/Os 14 0.7x1.3\" (18x33mm)\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATmega328 running at 16MHz with external resonator (0.5% tolerance)\u003c\/li\u003e\n\u003cli\u003eNo USB connection off board. Need FTDI board (or similar device) to program.\u003c\/li\u003e\n\u003cli\u003eSupports auto-reset\u003c\/li\u003e\n\u003cli\u003e5V regulator\u003c\/li\u003e\n\u003cli\u003eMax 150mA output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":7883170480365,"title":"SparkFun XBee Explorer Dongle - Red","handle":"sparkfun-xbee-explorer-dongle-red","description":"\u003ch1\u003eSparkFun XBee Explorer Dongle - Red\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eThis is the XBee Explorer Dongle unit for the Digi XBee\nmodule line. With the XBee Explorer Dongle you can plug the unit directly into\nyour USB port and have it act as a gateway between your computer and the XBee.\nNo cables needed! This unit works with all XBee modules including the Series 1\nand Series 2.5, standard and Pro version. The on-board voltage regulator is\ngood up to 500mA. The highlight of this board is an FT231X USB-to-Serial\nconverter. That’s what translates data between your computer and the XBee.\nThere’s also a reset button, and a voltage regulator to supply the XBee with\nplenty of power. In addition, there are four LEDs that’ll help if you ever\nneed to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power\nindicator. This board also breaks out each of the XBee’s I\/O pins to a pair of\nbreadboard-compatible headers. So if you want to make use of the XBee’s\nextended functionality, you can solder some header pins into those, or even\njust solder some wire. Note: There is no XBee included with this Explorer\nDongle. Set Contains: 1 x XBee Explorer Dongle\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug the unit directly into your USB port and have it act as a gateway between your computer and the XBee.\u003c\/li\u003e\n\u003cli\u003eFT231X USB-to-Serial converter\u003c\/li\u003e\n\u003cli\u003eThis unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-12T16:32:49+10:00","created_at":"2022-08-12T16:32:51+10:00","vendor":"SparkFun","type":"Desktop Barebones","tags":["electronics"],"price":14200,"price_min":14200,"price_max":14200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43127880024301,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B011QJIHY4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun XBee Explorer Dongle - Red","public_title":null,"options":["Default Title"],"price":14200,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"717520027379","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/51WRL-dwSlL.jpg?v=1660285971","\/\/leoforward.com\/cdn\/shop\/products\/415GUfdlmZL.jpg?v=1660285971","\/\/leoforward.com\/cdn\/shop\/products\/51DcZWxEoFL.jpg?v=1660285971"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/51WRL-dwSlL.jpg?v=1660285971","options":["Title"],"media":[{"alt":" [AUSTRALIA] - SparkFun XBee Explorer Dongle - Red","id":30231767941357,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51WRL-dwSlL.jpg?v=1660285971"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51WRL-dwSlL.jpg?v=1660285971","width":500},{"alt":" [AUSTRALIA] - SparkFun XBee Explorer Dongle - Red","id":30231767974125,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/415GUfdlmZL.jpg?v=1660285971"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/415GUfdlmZL.jpg?v=1660285971","width":500},{"alt":" [AUSTRALIA] - SparkFun XBee Explorer Dongle - Red","id":30231768006893,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51DcZWxEoFL.jpg?v=1660285971"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51DcZWxEoFL.jpg?v=1660285971","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eSparkFun XBee Explorer Dongle - Red\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eThis is the XBee Explorer Dongle unit for the Digi XBee\nmodule line. With the XBee Explorer Dongle you can plug the unit directly into\nyour USB port and have it act as a gateway between your computer and the XBee.\nNo cables needed! This unit works with all XBee modules including the Series 1\nand Series 2.5, standard and Pro version. The on-board voltage regulator is\ngood up to 500mA. The highlight of this board is an FT231X USB-to-Serial\nconverter. That’s what translates data between your computer and the XBee.\nThere’s also a reset button, and a voltage regulator to supply the XBee with\nplenty of power. In addition, there are four LEDs that’ll help if you ever\nneed to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power\nindicator. This board also breaks out each of the XBee’s I\/O pins to a pair of\nbreadboard-compatible headers. So if you want to make use of the XBee’s\nextended functionality, you can solder some header pins into those, or even\njust solder some wire. Note: There is no XBee included with this Explorer\nDongle. Set Contains: 1 x XBee Explorer Dongle\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug the unit directly into your USB port and have it act as a gateway between your computer and the XBee.\u003c\/li\u003e\n\u003cli\u003eFT231X USB-to-Serial converter\u003c\/li\u003e\n\u003cli\u003eThis unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}