Signal generator module PWM, stepper motor control PWM pulse signal generator 15-160V / 5-12V frequency pulse adjustable stepper motor
Signal generator module PWM, stepper motor control PWM pulse signal generator 15-160V / 5-12V frequency pulse adjustable stepper motor
Description: This controller can generate PWM signal functions. The card has a jumper. You can set the default setting of the pulse frequency signal. Specification : Supply Voltage: 15-160V/5-12V Frequency: High: 5.8KHZ-127KHZ, Medium: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ Size: Approx. 73 x 51 x 37 mm / 2.87 x 2 x 1.45 inch Weight: 50 g Quantity: 1 piece Package list: 1x PWM generator Note: When you start or use stop function, ENA controller enable terminal must be connected to a common cathode or a common anode drive can be connected.
Product Features
- This module is supplied as a stepper control signal. However, the drive must also be used to control the stepper motor.
- The measuring frequency can be two PUL and GND connections (GND). The forward and reverse motion of the motor can be controlled by pressing the button. The speed of the motor can be controlled by adjusting the frequency of the potentiometer.
- The controller has a high, medium and low sum of three types of frequency signals, which can be used to select the jumper.
- PUL + and PUL- pulsed positive and negative; EN + and EN- is intended to activate the positive and negative terminals; DIR + and DIR- are the positive and negative directions. These six lines are connected to control the corresponding pulse direction, so six connections p
- Power supply: 15-160VDC or 5-12VDC. If you use 5-12VDC voltage, connect the positive end to the DC 5-12V input and the negative end to the common cathode end.