ALMOCN 2PCS 0.96" OLED Module I2C IIC Serial 12864 128X64 OLED Display Module with SSD 1306 Driver(2PCS,Blue) 2Pcs 0.96" Blue
ALMOCN 2PCS 0.96" OLED Module I2C IIC Serial 12864 128X64 OLED Display Module with SSD 1306 Driver(2PCS,Blue)
Description
Specification: Size: 0.96 Resolution: 128X64 Color: Blue Viewing angle: greater than 160 degrees Supported platforms: for arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC Working temperature: -30-80 degrees Volume: 27MM 27MM 4.1MM Driver IC: SSD1306 Communication: IIC, only two I / O ports No font: The software takes word modulo Backlight: OLED self light, no backlight Interface: VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Data Features: This OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip. It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness. The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C. That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode. There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project. Applications: MP3, MP4, watch;Head-mounted displays Meters and other intelligent instruments Design any pretty patterns for your beloved electronic devices! Package included: 1/2 0.96 Inch I2C OLED Display
Features:
- This i2c display module is 0.96 inch diagonal,Resolution: 128 x 64, View angle: > 160, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W.
- With high resolution of 128 x 64 pixels, no need backlight, self-illumination, pixels stand outvery well even in a brighter circumstances like full sunlight.
- Embedded Driver IC: SSD 1306. Communication: I2C/IIC Interface, only need two I / O ports
- With four square holes, our I2C OLED display module can be installed easily, convenient to use and simple you working.
- It can be widely use with Raspberry Pi, 51 series, MSP430 series, STM32/2, CSR IC, etc.