ACEIRMC 4pcs 0.96 Inch OLED Module 12864 128x64 SSD1315 Driver IIC I2C Serial Self-Luminous Display Board Compatible with Arduino Raspberry PI (Blue and Yellow) Blue and Yellow
ACEIRMC 4pcs 0.96 Inch OLED Module 12864 128x64 SSD1315 Driver IIC I2C Serial Self-Luminous Display Board Compatible with Arduino Raspberry PI (Blue and Yellow)
Description
Features: This OLED display module is small, only 0.96inch diagonal, it is made of 128x64 OLED pixels, each one is turn on or off by the controller chip. It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness. The driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C. That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode. There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project. OLED self-luminous, no backlight. Applications: MP3, MP4, watch, head-mounted displays, meters and other intelligent instruments. Design any pretty patterns for your beloved electronic devices. Specification: Size: 0.96 inch Driver IC: SSD1306 Voltage: 3.3V-5V DC Viewing angle: more than 160 degree High resolution: 128 x 64 Working Temperature: -30 to 70 degree Centigrade Module size: 27 x 27 x 4 mm Screen material: glass, need good protection I2C Interface: GND: ground VCC: 3.3V-5V SCL: I2C serial clock (A5; MEGA: 21) SDA: I2C serial data (A4; MEGA: 20) Package includes: 4 x 0.96 Inch 128x64 OLED display module
Features:
- Applications: 0.96 inch OLED module for showing graphical and textual information directly on your micro-controller projects; It supports many chips: compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Resolution: 128 x 64; View angle: more than 160 degree; Support voltage: 3.3V-5V DC; Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded driver IC: SSD1315; Communication: I2C/IIC Interface, only need 2 I/O ports; Compatible with MMDVM, Pi-Star, and it is compatible with Raspberry pi
- It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.
- Low-power, very legible and vibrant, a crisp screen, pixels stand out very well even in a brighter circumstances like full sunlight.