10 x LED constant current source micro 20mA for 1-11 LEDs miniature KSQ Uin= 4-28V
10 x LED constant current source micro 20mA for 1-11 LEDs miniature KSQ Uin= 4-28V
In comparison to the Clic resistor (medical advantage), we have the flow through the LED variable input voltage and at the same time the brightness of your LEDs is always constant in a voltage range between 4 V and 28 V DC. Compensate for the micro constant current sources that occur, e.g. B. Brightness fluctuations due to weakening batteries, 1. 11 LEDs can be connected in series. The number of possible LEDs depends on the type and the required LED voltage. The ksq serves as a resistor (and two wide connection pads on the left and right). The arrangement of the ksq can be inserted in both the plus and minus cable (arrow account address). 10 x LED constant current source micro 20 mA for 111 LEDs Miniature KSQ Uin = 428 V Constant current sources (KSQs) have the advantage that they keep the current through the LED and thus the brightness constant at different input voltages. Your LED always lights up constantly in a voltage range between 4V and 28V DC. The micro constant current sources can, for example, compensate for differences in brightness caused by weaker batteries. 111 LEDs can be connected in series. The number of LEDs that are possible depends on the type and required voltage of the LEDs. The KSQ is installed like a resistor; two generous connection pads are available on the left and right. The KSQ can be used in both positive and negative cables. (Please note the direction of the arrow) General features: Operating mode: linear. Operating temperature: 25-85°C. Board dimensions: 8.4 x 5.8 x 2.6 mm +0.2 mm Electrical characteristics: Input voltage: 4 28 V DC Output current: 20 mA
Product Features
- Constant current sources (KSQs) have the advantage that they keep the current through the LED and thus the brightness constant at different input voltages.
- Your LED always lights up constantly in a voltage range between 4V and 28V DC voltage. The micro constant current sources can, for example, compensate for differences in brightness caused by weaker batteries.
- 1-11 LEDs can be connected in series. The number of possible LEDs depends on the type and required voltage of the LEDs. The KSQ is installed like a resistor; two large connection pads are available on the left and right. The KSQ can be used in both positive and negative cables. (Please note the direction of the arrow)
- General features: Operating mode: linear. Operating temperature: -25 85 C. Plate dimensions: 8.4 x 5.8 x 2.6 mm +0.2 mm
- Electrical characteristics: Input voltage: 4 28 V DC, output current: 20 mA. li>