FASTCHIP Lead Free Fast Chip Kit For Quik SMD Removal with A Low Temperature Alloy
FASTCHIP Lead Free Fast Chip Kit For Quik SMD Removal with A Low Temperature Alloy
The heart of the Kit is a length of fast chip low temperature removal alloy. This alloy is like a solder that melts at temperatures well below that of normal solder (100°C and 212°F) and stays liquid long enough to melt the existing solder, allowing you time to carefully remove the component. Simply apply a liberal amount of the included flux to the pins of the chip that you want to remove, then use a soldering iron with a flat-edged tip to heat The pins while applying the low temperature alloy. The alloy will remain liquid for a few seconds While you coat all of the connections, once you've coated The pins You should be able to lift the chip free using tweezers or a hemostat. Clean the pads thoroughly and apply fresh solder and you're ready to solder a new part in place.
Product Features
- The fast chip SMD removal kit is a quick and inexpensive way to remove SMD components from a PCB without a hot air station using only your soldering iron.
- Fast Chip Alloy, TF5000 fLUX
- Metal
- battery-powered