{"id":7138344108187,"title":"Capri Tools 3\/8-Inch Drive Wobble Impact Extension Bar Set, CrMo, 3-Piece","handle":"capri-tools-3-8-inch-drive-wobble-impact-extension-bar-set-crmo-3-piece","description":"\u003ch3\u003eCapri Tools 3\/8-Inch Drive Wobble Impact Extension Bar Set, CrMo, 3-Piece\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:3\/8-Inch Drive Wobble Two impact tools in one: use as a wobble extension\nbar when an offset clearance is needed or use as a regular rigid extension\nbar. Wobble feature lets you reach and turn fasteners that can only be reached\nat an angle up to 15 degrees; spring-loaded ball detent holds sockets securely\nin place. Premium Chrome Molybdenum steel tempered with our proprietary heat\ntreatment process to withstand more torque from power tools. Expertly coated\nwith manganese phosphate, the preferred coating in military and aerospace,\nwhich offers superior protection and corrosion resistance compared to black\noxide coating on other impact tools. Three 3\/8 in. drive wobble impact\nextension bars: 3, 6 and 12 in. long. The Capri Tools 3\/8 in. Drive Wobble\nImpact Extension Bar is two tools in one. It can be used as a wobble extension\nbar when an offset clearance is needed or as a regular rigid extension bar.\nThe wobble feature enables you to reach and turn fasteners that are obstructed\nand can only be reached at an angle. It allows up to 15 degrees offset.\nSpring-loaded ball detent holds sockets securely in place. When fully inserted\n(not at an angle), the extension bar locks into a regular rigid extension bar.\nThese extension bars are constructed of premium Chrome Molybdenum steel\ntempered with our proprietary heat treatment process to withstand more torque\nfrom power tools. Expertly coated with manganese phosphate, the preferred\ncoating in military and aerospace, which offers superior protection and\ncorrosion resistance compared to black oxide coating on other impact tools.\nThree 3\/8 in. drive wobble impact extension bars are included in the set: 3, 6\nand 12 in. long.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTwo impact tools in one: use as a wobble extension bar when an offset clearance is needed or use as a regular rigid extension bar\u003c\/li\u003e\n \u003cli\u003eWobble feature lets you reach and turn fasteners that can only be reached at an angle up to 15 degrees; spring-loaded ball detent holds sockets securely in place\u003c\/li\u003e\n \u003cli\u003ePremium Chrome Molybdenum steel tempered with our proprietary heat treatment process to withstand more torque from power tools\u003c\/li\u003e\n \u003cli\u003eExpertly coated with manganese phosphate, the preferred coating in military and aerospace, which offers superior protection and corrosion resistance compared to black oxide coating on other impact tools\u003c\/li\u003e\n \u003cli\u003eThree 3\/8 in. drive wobble impact extension bars: 3, 6 and 12 in. long\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-10-04T16:43:56+11:00","created_at":"2021-10-04T16:43:56+11:00","vendor":"Capri Tools","type":"Square Drive","tags":["cocoon"],"price":18100,"price_min":18100,"price_max":18100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41316580851867,"title":"3\/8-Inch Drive Wobble","option1":"3\/8-Inch Drive Wobble","option2":null,"option3":null,"sku":"B01NB0BQLN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Capri Tools 3\/8-Inch Drive Wobble Impact Extension Bar Set, CrMo, 3-Piece - 3\/8-Inch Drive Wobble","public_title":"3\/8-Inch Drive Wobble","options":["3\/8-Inch Drive Wobble"],"price":18100,"weight":590,"compare_at_price":null,"inventory_management":null,"barcode":"886352581509","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B01NB0BQLN.jpg?v=1651497815","\/\/leoforward.com\/cdn\/shop\/products\/71v65DZ-40L.jpg?v=1633331494","\/\/leoforward.com\/cdn\/shop\/products\/71VcHDcIASL.jpg?v=1633331494","\/\/leoforward.com\/cdn\/shop\/products\/71bgpEv5dJL.jpg?v=1633331494","\/\/leoforward.com\/cdn\/shop\/products\/81VF90eN6YL.jpg?v=1633331494"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B01NB0BQLN.jpg?v=1651497815","options":["Size"],"media":[{"alt":"Capri Tools 3\/8-Inch Drive Wobble Impact Extension Bar Set, CrMo, 3-Piece - LeoForward Australia","id":29667263906029,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B01NB0BQLN.jpg?v=1651497815"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B01NB0BQLN.jpg?v=1651497815","width":2000},{"alt":"Capri Tools 3\/8-Inch Drive Wobble Impact Extension Bar Set, CrMo, 3-Piece - LeoForward Australia","id":25196580700315,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71v65DZ-40L.jpg?v=1633331494"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71v65DZ-40L.jpg?v=1633331494","width":2000},{"alt":"Capri Tools 3\/8-Inch Drive Wobble Impact Extension Bar Set, CrMo, 3-Piece - LeoForward Australia","id":25196580733083,"position":3,"preview_image":{"aspect_ratio":1.074,"height":2000,"width":2147,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71VcHDcIASL.jpg?v=1633331494"},"aspect_ratio":1.074,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71VcHDcIASL.jpg?v=1633331494","width":2147},{"alt":"Capri Tools 3\/8-Inch Drive Wobble Impact Extension Bar Set, CrMo, 3-Piece - LeoForward Australia","id":25196580765851,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":1999,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71bgpEv5dJL.jpg?v=1633331494"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71bgpEv5dJL.jpg?v=1633331494","width":1999},{"alt":"Capri Tools 3\/8-Inch Drive Wobble Impact Extension Bar Set, CrMo, 3-Piece - LeoForward Australia","id":25196580798619,"position":5,"preview_image":{"aspect_ratio":1.619,"height":1235,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81VF90eN6YL.jpg?v=1633331494"},"aspect_ratio":1.619,"height":1235,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81VF90eN6YL.jpg?v=1633331494","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCapri Tools 3\/8-Inch Drive Wobble Impact Extension Bar Set, CrMo, 3-Piece\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:3\/8-Inch Drive Wobble Two impact tools in one: use as a wobble extension\nbar when an offset clearance is needed or use as a regular rigid extension\nbar. Wobble feature lets you reach and turn fasteners that can only be reached\nat an angle up to 15 degrees; spring-loaded ball detent holds sockets securely\nin place. Premium Chrome Molybdenum steel tempered with our proprietary heat\ntreatment process to withstand more torque from power tools. Expertly coated\nwith manganese phosphate, the preferred coating in military and aerospace,\nwhich offers superior protection and corrosion resistance compared to black\noxide coating on other impact tools. Three 3\/8 in. drive wobble impact\nextension bars: 3, 6 and 12 in. long. The Capri Tools 3\/8 in. Drive Wobble\nImpact Extension Bar is two tools in one. It can be used as a wobble extension\nbar when an offset clearance is needed or as a regular rigid extension bar.\nThe wobble feature enables you to reach and turn fasteners that are obstructed\nand can only be reached at an angle. It allows up to 15 degrees offset.\nSpring-loaded ball detent holds sockets securely in place. When fully inserted\n(not at an angle), the extension bar locks into a regular rigid extension bar.\nThese extension bars are constructed of premium Chrome Molybdenum steel\ntempered with our proprietary heat treatment process to withstand more torque\nfrom power tools. Expertly coated with manganese phosphate, the preferred\ncoating in military and aerospace, which offers superior protection and\ncorrosion resistance compared to black oxide coating on other impact tools.\nThree 3\/8 in. drive wobble impact extension bars are included in the set: 3, 6\nand 12 in. long.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTwo impact tools in one: use as a wobble extension bar when an offset clearance is needed or use as a regular rigid extension bar\u003c\/li\u003e\n \u003cli\u003eWobble feature lets you reach and turn fasteners that can only be reached at an angle up to 15 degrees; spring-loaded ball detent holds sockets securely in place\u003c\/li\u003e\n \u003cli\u003ePremium Chrome Molybdenum steel tempered with our proprietary heat treatment process to withstand more torque from power tools\u003c\/li\u003e\n \u003cli\u003eExpertly coated with manganese phosphate, the preferred coating in military and aerospace, which offers superior protection and corrosion resistance compared to black oxide coating on other impact tools\u003c\/li\u003e\n \u003cli\u003eThree 3\/8 in. drive wobble impact extension bars: 3, 6 and 12 in. long\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7138321170587,"title":"Stanley Proto J7446M 1\/2\" Drive Impact Socket, 46mm, 6 Point","handle":"stanley-proto-j7446m-1-2-drive-impact-socket-46mm-6-point","description":"\u003ch3\u003eStanley Proto J7446M 1\/2\" Drive Impact Socket, 46mm, 6 Point\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStanley J7446M Proto 1\/2-inch Drive Impact Socket 46 mm - 6 Point Proto 6\nPoint Impact Sockets are ideal for use on stubborn or damaged fasteners and\nalso on fasteners made from soft materials. The TorquePlus design is a high\nperformance drive configuration which allows for quick and easy socket\nengagement to the fastener flats, not the corners. The TorquePlus\nconfiguration employs a radius-corner design, shifting contact area and stress\naway from the fastener corners and distributing contact stresses over a large\narea of the socket, minimizing slippage. The TorquePlus internal design\nminimizes fastener rounding, helps to extend fastener life and allows the user\nto more easily turn worn, rounded, or rusted fasteners.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eProto 6 Point Impact Sockets are ideal for use on stubborn or damaged fasteners and also on fasteners made from soft materials\u003c\/li\u003e\n \u003cli\u003eThe TorquePlus design is a high performance drive configuration which allows for quick and easy socket engagement\u003c\/li\u003e\n \u003cli\u003eThe TorquePlus configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-10-04T16:25:45+11:00","created_at":"2021-10-04T16:25:45+11:00","vendor":"Proto","type":"Triple Square Drive","tags":["cocoon"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41316485333147,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B003PR22XS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Stanley Proto J7446M 1\/2\" Drive Impact Socket, 46mm, 6 Point","public_title":null,"options":["Default Title"],"price":24700,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":"662679977252","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B003PR22XS.jpg?v=1651496076","\/\/leoforward.com\/cdn\/shop\/products\/61bP6O5PH2L.jpg?v=1633330588"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B003PR22XS.jpg?v=1651496076","options":["Title"],"media":[{"alt":"Stanley Proto J7446M 1\/2\" Drive Impact Socket, 46mm, 6 Point - LeoForward Australia","id":29666836349165,"position":1,"preview_image":{"aspect_ratio":1.053,"height":1000,"width":1053,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B003PR22XS.jpg?v=1651496076"},"aspect_ratio":1.053,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B003PR22XS.jpg?v=1651496076","width":1053},{"alt":"Stanley Proto J7446M 1\/2\" Drive Impact Socket, 46mm, 6 Point - LeoForward Australia","id":25196393824411,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61bP6O5PH2L.jpg?v=1633330588"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61bP6O5PH2L.jpg?v=1633330588","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eStanley Proto J7446M 1\/2\" Drive Impact Socket, 46mm, 6 Point\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStanley J7446M Proto 1\/2-inch Drive Impact Socket 46 mm - 6 Point Proto 6\nPoint Impact Sockets are ideal for use on stubborn or damaged fasteners and\nalso on fasteners made from soft materials. The TorquePlus design is a high\nperformance drive configuration which allows for quick and easy socket\nengagement to the fastener flats, not the corners. The TorquePlus\nconfiguration employs a radius-corner design, shifting contact area and stress\naway from the fastener corners and distributing contact stresses over a large\narea of the socket, minimizing slippage. The TorquePlus internal design\nminimizes fastener rounding, helps to extend fastener life and allows the user\nto more easily turn worn, rounded, or rusted fasteners.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eProto 6 Point Impact Sockets are ideal for use on stubborn or damaged fasteners and also on fasteners made from soft materials\u003c\/li\u003e\n \u003cli\u003eThe TorquePlus design is a high performance drive configuration which allows for quick and easy socket engagement\u003c\/li\u003e\n \u003cli\u003eThe TorquePlus configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7115355717787,"title":"Grey Pneumatic (3313S) 3\/4\" Drive x 13\/16\" 4-Point Square Socket 13\/16\" Square - 4 Point","handle":"grey-pneumatic-3313s-3-4-drive-x-13-16-4-point-square-socket-13-16-square-4-point","description":"\u003ch3\u003eGrey Pneumatic (3313S) 3\/4\" Drive x 13\/16\" 4-Point Square Socket\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:13\/16\" Square - 4 Point GP3313S Features: -Made of high quality alloy\nsteel (chrome-molybdenum). -Designed specifically for inner budd-style square\nfasteners on truck wheels. -Tested to the highest specifications to deliver\noutstanding performance at the competitive cost. -3\/4'''' Drive 4 Point\n(Square) Fractional Impact Socket - 13\/16''''. Dimensions: Overall Height -\nTop to Bottom: -2 Inches. Overall Width - Side to Side: -3 Inches. Overall\nProduct Weight: -3 Pounds.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePackage Dimensions: 12.7 H x 4.191 L x 4.267 W (centimetres)\u003c\/li\u003e\n \u003cli\u003eCountry of Origin : Taiwan\u003c\/li\u003e\n \u003cli\u003eFit type: Universal\u003c\/li\u003e\n \u003cli\u003ePackage Weight: 0.522 kilograms\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-29T22:18:28+10:00","created_at":"2021-09-29T22:18:28+10:00","vendor":"Grey Pneumatic","type":"Square Drive","tags":["cocoon"],"price":16600,"price_min":16600,"price_max":16600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41275554168987,"title":"13\/16\" Square - 4 Point","option1":"13\/16\" Square - 4 Point","option2":null,"option3":null,"sku":"B000F72RKO","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grey Pneumatic (3313S) 3\/4\" Drive x 13\/16\" 4-Point Square Socket 13\/16\" Square - 4 Point - 13\/16\" Square - 4 Point","public_title":"13\/16\" Square - 4 Point","options":["13\/16\" Square - 4 Point"],"price":16600,"weight":522,"compare_at_price":null,"inventory_management":null,"barcode":"729440473976","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B000F72RKO.jpg?v=1651476090"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B000F72RKO.jpg?v=1651476090","options":["Style"],"media":[{"alt":"Grey Pneumatic (3313S) 3\/4\" Drive x 13\/16\" 4-Point Square Socket 13\/16\" Square - 4 Point - LeoForward Australia","id":29664388907245,"position":1,"preview_image":{"aspect_ratio":1.335,"height":1161,"width":1550,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B000F72RKO.jpg?v=1651476090"},"aspect_ratio":1.335,"height":1161,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B000F72RKO.jpg?v=1651476090","width":1550}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eGrey Pneumatic (3313S) 3\/4\" Drive x 13\/16\" 4-Point Square Socket\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:13\/16\" Square - 4 Point GP3313S Features: -Made of high quality alloy\nsteel (chrome-molybdenum). -Designed specifically for inner budd-style square\nfasteners on truck wheels. -Tested to the highest specifications to deliver\noutstanding performance at the competitive cost. -3\/4'''' Drive 4 Point\n(Square) Fractional Impact Socket - 13\/16''''. Dimensions: Overall Height -\nTop to Bottom: -2 Inches. Overall Width - Side to Side: -3 Inches. Overall\nProduct Weight: -3 Pounds.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePackage Dimensions: 12.7 H x 4.191 L x 4.267 W (centimetres)\u003c\/li\u003e\n \u003cli\u003eCountry of Origin : Taiwan\u003c\/li\u003e\n \u003cli\u003eFit type: Universal\u003c\/li\u003e\n \u003cli\u003ePackage Weight: 0.522 kilograms\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7079432716443,"title":"Crescent 3\/8\" Drive 6 Point Deep SAE Socket 9\/16\" - CDDS28N","handle":"crescent-3-8-drive-6-point-deep-sae-socket-9-16-cdds28n","description":"\u003ch3\u003eCrescent 3\/8\" Drive 6 Point Deep SAE Socket 9\/16\" - CDDS28N\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eTrusted by the trades. Since 1907, Crescent has offered quality tools with\nproven innovation that enables professionals and DIYers alike to get the job\ndone. All sockets and ratchets meet or exceed a.N.S.I load specifications,\nresulting in tools you can count on to be strong, well-designed, and durable\nenough to get the job done right, time after time.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eNickel chrome plated for long lasting protection\u003c\/li\u003e\n \u003cli\u003eMade of chrome vanadium steel alloy specially formulated and heat-treated for strength and corrosion-resistance\u003c\/li\u003e\n \u003cli\u003eMirror polish finish thats easy to Wipe clean\u003c\/li\u003e\n \u003cli\u003eSockets feature off corner loading technology to virtually eliminate fastener rounding\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-20T02:15:48+10:00","created_at":"2021-09-20T02:15:48+10:00","vendor":"Crescent","type":"Triple Square Drive","tags":["cocoon"],"price":9900,"price_min":9900,"price_max":9900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41181868916891,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B079TKJSVL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crescent 3\/8\" Drive 6 Point Deep SAE Socket 9\/16\" - CDDS28N","public_title":null,"options":["Default Title"],"price":9900,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"CDDS28N","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B079TKJSVL.jpg?v=1651474278"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B079TKJSVL.jpg?v=1651474278","options":["Title"],"media":[{"alt":"Crescent 3\/8\" Drive 6 Point Deep SAE Socket 9\/16\" - CDDS28N - LeoForward Australia","id":29664267829485,"position":1,"preview_image":{"aspect_ratio":0.312,"height":2560,"width":799,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B079TKJSVL.jpg?v=1651474278"},"aspect_ratio":0.312,"height":2560,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B079TKJSVL.jpg?v=1651474278","width":799}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCrescent 3\/8\" Drive 6 Point Deep SAE Socket 9\/16\" - CDDS28N\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eTrusted by the trades. Since 1907, Crescent has offered quality tools with\nproven innovation that enables professionals and DIYers alike to get the job\ndone. All sockets and ratchets meet or exceed a.N.S.I load specifications,\nresulting in tools you can count on to be strong, well-designed, and durable\nenough to get the job done right, time after time.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eNickel chrome plated for long lasting protection\u003c\/li\u003e\n \u003cli\u003eMade of chrome vanadium steel alloy specially formulated and heat-treated for strength and corrosion-resistance\u003c\/li\u003e\n \u003cli\u003eMirror polish finish thats easy to Wipe clean\u003c\/li\u003e\n \u003cli\u003eSockets feature off corner loading technology to virtually eliminate fastener rounding\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7073674887323,"title":"TEKTON 1\/2 Inch Drive x 9\/16 Inch 6-Point Impact Socket | 47752 Standard 9\/16 in.","handle":"tekton-1-2-inch-drive-x-9-16-inch-6-point-impact-socket-47752-standard-9-16-in-2","description":"\u003ch3\u003eTEKTON 1\/2 Inch Drive x 9\/16 Inch 6-Point Impact Socket | 47752\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:Standard | Size:9\/16 in. The TEKTON 1\/2 in. Drive x 9\/16 in. Shallow\nImpact Socket is engineered for use with impact drivers. It has a 6-point\nopening that snugly fits the hex shape of fastener heads, allowing it to apply\nmaximum torque without slipping. To prevent round-off under stress, it grips\nthe flat sides of fastener heads rather than the corners. Easy to read even in\nlow light, the large, high-contrast size marking is permanently laser etched\ninto the steel surface. The through-hole in the drive end locks onto the tang\nof impact wrenches or drivers so it won't fall off or stick on fastener heads.\nTo protect against rust and corrosion, the black phosphate finish absorbs and\nholds oil, repelling moisture.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEngineered for use with impact drivers\u003c\/li\u003e\n \u003cli\u003eHigh-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off\u003c\/li\u003e\n \u003cli\u003eFits into tighter spaces compared to deep sockets\u003c\/li\u003e\n \u003cli\u003eLarge, high-contrast size marking is permanently laser etched and easy to read, even in low light\u003c\/li\u003e\n \u003cli\u003eMade of premium chrome vanadium steel with a protective black phosphate finish\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-17T21:12:24+10:00","created_at":"2021-09-17T21:12:24+10:00","vendor":"TEKTON","type":"Triple Square Drive","tags":["cocoon"],"price":11800,"price_min":11800,"price_max":11800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41160808792219,"title":"9\/16 in. \/ Standard","option1":"9\/16 in.","option2":"Standard","option3":null,"sku":"B000NYA29M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TEKTON 1\/2 Inch Drive x 9\/16 Inch 6-Point Impact Socket | 47752 Standard 9\/16 in. - 9\/16 in. \/ Standard","public_title":"9\/16 in. \/ Standard","options":["9\/16 in.","Standard"],"price":11800,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"020209477526","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B000NYA29M.jpg?v=1651467791","\/\/leoforward.com\/cdn\/shop\/products\/71JsSQl36fL_302a8404-43cc-4766-b797-0392dddafc37.jpg?v=1631950456","\/\/leoforward.com\/cdn\/shop\/products\/61dPbnR1_bL_ae8f32ff-cae1-4f9a-9f68-219af784fd3d.jpg?v=1631950456"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B000NYA29M.jpg?v=1651467791","options":["Size","Style"],"media":[{"alt":"TEKTON 1\/2 Inch Drive x 9\/16 Inch 6-Point Impact Socket | 47752 Standard 9\/16 in. - LeoForward Australia","id":29663751274733,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1500,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B000NYA29M.jpg?v=1651467791"},"aspect_ratio":1.333,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B000NYA29M.jpg?v=1651467791","width":2000},{"alt":"TEKTON 1\/2 Inch Drive x 9\/16 Inch 6-Point Impact Socket | 47752 Standard 9\/16 in. - LeoForward Australia","id":24927552503963,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1500,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71JsSQl36fL_302a8404-43cc-4766-b797-0392dddafc37.jpg?v=1631950456"},"aspect_ratio":1.333,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71JsSQl36fL_302a8404-43cc-4766-b797-0392dddafc37.jpg?v=1631950456","width":2000},{"alt":"TEKTON 1\/2 Inch Drive x 9\/16 Inch 6-Point Impact Socket | 47752 Standard 9\/16 in. - LeoForward Australia","id":24927552536731,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1500,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61dPbnR1_bL_ae8f32ff-cae1-4f9a-9f68-219af784fd3d.jpg?v=1631950456"},"aspect_ratio":1.333,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61dPbnR1_bL_ae8f32ff-cae1-4f9a-9f68-219af784fd3d.jpg?v=1631950456","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTEKTON 1\/2 Inch Drive x 9\/16 Inch 6-Point Impact Socket | 47752\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:Standard | Size:9\/16 in. The TEKTON 1\/2 in. Drive x 9\/16 in. Shallow\nImpact Socket is engineered for use with impact drivers. It has a 6-point\nopening that snugly fits the hex shape of fastener heads, allowing it to apply\nmaximum torque without slipping. To prevent round-off under stress, it grips\nthe flat sides of fastener heads rather than the corners. Easy to read even in\nlow light, the large, high-contrast size marking is permanently laser etched\ninto the steel surface. The through-hole in the drive end locks onto the tang\nof impact wrenches or drivers so it won't fall off or stick on fastener heads.\nTo protect against rust and corrosion, the black phosphate finish absorbs and\nholds oil, repelling moisture.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEngineered for use with impact drivers\u003c\/li\u003e\n \u003cli\u003eHigh-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off\u003c\/li\u003e\n \u003cli\u003eFits into tighter spaces compared to deep sockets\u003c\/li\u003e\n \u003cli\u003eLarge, high-contrast size marking is permanently laser etched and easy to read, even in low light\u003c\/li\u003e\n \u003cli\u003eMade of premium chrome vanadium steel with a protective black phosphate finish\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7073662140571,"title":"TEKTON 1\/2 Inch Drive x 15 mm 6-Point Impact Socket | 47770 Standard","handle":"tekton-1-2-inch-drive-x-15-mm-6-point-impact-socket-47770-standard","description":"\u003ch3\u003eTEKTON 1\/2 Inch Drive x 15 mm 6-Point Impact Socket | 47770\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:Standard | Size:15 mm The TEKTON 1\/2 in. Drive x 15 mm Shallow Impact\nSocket is engineered for use with impact drivers. It has a 6-point opening\nthat snugly fits the hex shape of fastener heads, allowing it to apply maximum\ntorque without slipping. To prevent round-off under stress, it grips the flat\nsides of fastener heads rather than the corners. Easy to read even in low\nlight, the large, high-contrast size marking is permanently laser etched into\nthe steel surface. The through-hole in the drive end locks onto the tang of\nimpact wrenches or drivers so it won't fall off or stick on fastener heads. To\nprotect against rust and corrosion, the black phosphate finish absorbs and\nholds oil, repelling moisture.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEngineered for use with impact drivers\u003c\/li\u003e\n \u003cli\u003eHigh-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off\u003c\/li\u003e\n \u003cli\u003eFits into tighter spaces compared to deep sockets\u003c\/li\u003e\n \u003cli\u003eLarge, high-contrast size marking is permanently laser etched and easy to read, even in low light\u003c\/li\u003e\n \u003cli\u003eMade of premium chrome vanadium steel with a protective black phosphate finish\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-17T21:07:51+10:00","created_at":"2021-09-17T21:07:51+10:00","vendor":"TEKTON","type":"Triple Square Drive","tags":["cocoon"],"price":9900,"price_min":9900,"price_max":9900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41160753709211,"title":"15 mm \/ Standard","option1":"15 mm","option2":"Standard","option3":null,"sku":"B000NY6RT6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TEKTON 1\/2 Inch Drive x 15 mm 6-Point Impact Socket | 47770 Standard - 15 mm \/ Standard","public_title":"15 mm \/ Standard","options":["15 mm","Standard"],"price":9900,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"020209477700","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B000NY6RT6.jpg?v=1651467460","\/\/leoforward.com\/cdn\/shop\/products\/71Ruzkza0dL.jpg?v=1631950194","\/\/leoforward.com\/cdn\/shop\/products\/61dPbnR1_bL.jpg?v=1631950194"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B000NY6RT6.jpg?v=1651467460","options":["Size","Style"],"media":[{"alt":"TEKTON 1\/2 Inch Drive x 15 mm 6-Point Impact Socket | 47770 Standard - LeoForward Australia","id":29663736496365,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1500,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B000NY6RT6.jpg?v=1651467460"},"aspect_ratio":1.333,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B000NY6RT6.jpg?v=1651467460","width":2000},{"alt":"TEKTON 1\/2 Inch Drive x 15 mm 6-Point Impact Socket | 47770 Standard - LeoForward Australia","id":24927508463771,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1500,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71Ruzkza0dL.jpg?v=1631950194"},"aspect_ratio":1.333,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71Ruzkza0dL.jpg?v=1631950194","width":2000},{"alt":"TEKTON 1\/2 Inch Drive x 15 mm 6-Point Impact Socket | 47770 Standard - LeoForward Australia","id":24927508496539,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1500,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61dPbnR1_bL.jpg?v=1631950194"},"aspect_ratio":1.333,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61dPbnR1_bL.jpg?v=1631950194","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTEKTON 1\/2 Inch Drive x 15 mm 6-Point Impact Socket | 47770\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:Standard | Size:15 mm The TEKTON 1\/2 in. Drive x 15 mm Shallow Impact\nSocket is engineered for use with impact drivers. It has a 6-point opening\nthat snugly fits the hex shape of fastener heads, allowing it to apply maximum\ntorque without slipping. To prevent round-off under stress, it grips the flat\nsides of fastener heads rather than the corners. Easy to read even in low\nlight, the large, high-contrast size marking is permanently laser etched into\nthe steel surface. The through-hole in the drive end locks onto the tang of\nimpact wrenches or drivers so it won't fall off or stick on fastener heads. To\nprotect against rust and corrosion, the black phosphate finish absorbs and\nholds oil, repelling moisture.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEngineered for use with impact drivers\u003c\/li\u003e\n \u003cli\u003eHigh-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off\u003c\/li\u003e\n \u003cli\u003eFits into tighter spaces compared to deep sockets\u003c\/li\u003e\n \u003cli\u003eLarge, high-contrast size marking is permanently laser etched and easy to read, even in low light\u003c\/li\u003e\n \u003cli\u003eMade of premium chrome vanadium steel with a protective black phosphate finish\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7073660600475,"title":"OTC 6192 TORX PLUS Bit Socket - TP55 with 3\/8\" Square Drive","handle":"otc-6192-torx-plus-bit-socket-tp55-with-3-8-square-drive","description":"\u003ch3\u003eOTC 6192 TORX PLUS Bit Socket - TP55 with 3\/8\" Square Drive\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eOTC's 6192 is a 3\/8\" square drive, TP55 Torx PLUS bit socket. The Torx PLUS\ndesign features lobes that are more square to allow for higher torque and\nminimize wear. Torx PLUS was developed in 1990 as a refinement of the basic\nTorx design and intended to improve strength and performance, especially in\nautomated assembly situations. Made with two piece construction S2 grade steel\n- one of the highest quality tool grade steels used in production - this bit\nsocket is designed for endurance. A natural finish ensures that this socket\nwon’t crack or peel like many chrome plated versions can. NOTE: This high\nquality bit socket will provide a lifetime of performance when used with hand\ntools. Value is at the core of the OTC tool and equipment portfolio. For a\nsimple repair or the most complex drivability concern, these award-winning\ntools universally solve problems faster, and at better value, than any other\nproduct line available. Whether it’s a specialty tool or unique piece of\nservice equipment, OTC provides top solutions to modern automotive service\nchallenges while increasing technicians’ productivity and shop profits.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTP55 Torx PLUS bit socket with 3\/8 inch square drive; Torx PLUS design is an evolution of the original Torx design that features lobes that are more square to allow for higher torque and minimize wear\u003c\/li\u003e\n \u003cli\u003eTorx PLUS bit sockets are for use with Torx PLUS fasteners only - these bit sockets are not compatible with standard Torx fasteners\u003c\/li\u003e\n \u003cli\u003eMade with two piece construction S2 grade steel, one of the highest quality tool grade steels used in production, this bit socket is designed for endurance\u003c\/li\u003e\n \u003cli\u003eA natural finish ensures that this socket wont crack or peel like many chrome plated versions can\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-17T21:07:17+10:00","created_at":"2021-09-17T21:07:17+10:00","vendor":"OTC","type":"Star Drive","tags":["cocoon"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41160747614363,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B002YKG2R4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"OTC 6192 TORX PLUS Bit Socket - TP55 with 3\/8\" Square Drive","public_title":null,"options":["Default Title"],"price":12000,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"014444915226","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B002YKG2R4.jpg?v=1651467424"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B002YKG2R4.jpg?v=1651467424","options":["Title"],"media":[{"alt":"OTC 6192 TORX PLUS Bit Socket - TP55 with 3\/8\" Square Drive - LeoForward Australia","id":29663734759661,"position":1,"preview_image":{"aspect_ratio":1.623,"height":924,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B002YKG2R4.jpg?v=1651467424"},"aspect_ratio":1.623,"height":924,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B002YKG2R4.jpg?v=1651467424","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eOTC 6192 TORX PLUS Bit Socket - TP55 with 3\/8\" Square Drive\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eOTC's 6192 is a 3\/8\" square drive, TP55 Torx PLUS bit socket. The Torx PLUS\ndesign features lobes that are more square to allow for higher torque and\nminimize wear. Torx PLUS was developed in 1990 as a refinement of the basic\nTorx design and intended to improve strength and performance, especially in\nautomated assembly situations. Made with two piece construction S2 grade steel\n- one of the highest quality tool grade steels used in production - this bit\nsocket is designed for endurance. A natural finish ensures that this socket\nwon’t crack or peel like many chrome plated versions can. NOTE: This high\nquality bit socket will provide a lifetime of performance when used with hand\ntools. Value is at the core of the OTC tool and equipment portfolio. For a\nsimple repair or the most complex drivability concern, these award-winning\ntools universally solve problems faster, and at better value, than any other\nproduct line available. Whether it’s a specialty tool or unique piece of\nservice equipment, OTC provides top solutions to modern automotive service\nchallenges while increasing technicians’ productivity and shop profits.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTP55 Torx PLUS bit socket with 3\/8 inch square drive; Torx PLUS design is an evolution of the original Torx design that features lobes that are more square to allow for higher torque and minimize wear\u003c\/li\u003e\n \u003cli\u003eTorx PLUS bit sockets are for use with Torx PLUS fasteners only - these bit sockets are not compatible with standard Torx fasteners\u003c\/li\u003e\n \u003cli\u003eMade with two piece construction S2 grade steel, one of the highest quality tool grade steels used in production, this bit socket is designed for endurance\u003c\/li\u003e\n \u003cli\u003eA natural finish ensures that this socket wont crack or peel like many chrome plated versions can\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7073641234587,"title":"Sunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket","handle":"sunex-218z-1-2-inch-drive-9-16-inch-12-point-impact-socket","description":"\u003ch3\u003eSunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eNo doubt, the strongest impact socket line around. Sunex Tools impact sockets\ntackle the toughest jobs with a chrome molybdenum alloy steel grip that won't\nlet go. With solid durability that keeps them driving through job after job,\nwe've got sizes and styles enough to fulfill any need.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eForged from the finest chrome molybdenum alloy steel-the best choice for strength and durability\u003c\/li\u003e\n \u003cli\u003eRadius corner design-to extend the life of fasteners\u003c\/li\u003e\n \u003cli\u003eThe design drives the side of the fastener instead of the corner\u003c\/li\u003e\n \u003cli\u003eProvides increased strength, but also avoids rounding of rusted or damaged fasteners\u003c\/li\u003e\n \u003cli\u003e1\/2-Inch drive, 9\/16-Inch, 12 point impact socket\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-17T21:01:52+10:00","created_at":"2021-09-17T21:01:52+10:00","vendor":"Sunex Tools","type":"Triple Square Drive","tags":["cocoon"],"price":9800,"price_min":9800,"price_max":9800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41160670183579,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000JNK31O","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket","public_title":null,"options":["Default Title"],"price":9800,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"613364172186","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B000JNK31O.jpg?v=1651467009","\/\/leoforward.com\/cdn\/shop\/products\/71Kfsiz8kZL_83472a74-a4a4-4d75-a08d-476fc7538ffb.jpg?v=1631949846","\/\/leoforward.com\/cdn\/shop\/products\/71uiVL_LBQL_10f92fc0-057b-4efe-b7ab-805a3f499004.jpg?v=1631949846","\/\/leoforward.com\/cdn\/shop\/products\/71apFIBbxZL_c321afca-4c3c-4111-adfd-f327de83ec55.jpg?v=1631949846","\/\/leoforward.com\/cdn\/shop\/products\/81ESBJZUXDL_c013bf40-311d-44fe-ac38-db9b77046f49.jpg?v=1631949846","\/\/leoforward.com\/cdn\/shop\/products\/61OFS6c_wOL_7609d916-b1ee-42e8-84fd-2ba0a8d23363.jpg?v=1631949846","\/\/leoforward.com\/cdn\/shop\/products\/21pi8RgDBEL.jpg?v=1631949846"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B000JNK31O.jpg?v=1651467009","options":["Title"],"media":[{"alt":"Sunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket - LeoForward Australia","id":29663712706797,"position":1,"preview_image":{"aspect_ratio":0.554,"height":1247,"width":691,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B000JNK31O.jpg?v=1651467009"},"aspect_ratio":0.554,"height":1247,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B000JNK31O.jpg?v=1651467009","width":691},{"alt":"Sunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket - LeoForward Australia","id":24927422840987,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1707,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71Kfsiz8kZL_83472a74-a4a4-4d75-a08d-476fc7538ffb.jpg?v=1631949846"},"aspect_ratio":1.5,"height":1707,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71Kfsiz8kZL_83472a74-a4a4-4d75-a08d-476fc7538ffb.jpg?v=1631949846","width":2560},{"alt":"Sunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket - LeoForward Australia","id":24927422873755,"position":3,"preview_image":{"aspect_ratio":1.5,"height":1707,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71uiVL_LBQL_10f92fc0-057b-4efe-b7ab-805a3f499004.jpg?v=1631949846"},"aspect_ratio":1.5,"height":1707,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71uiVL_LBQL_10f92fc0-057b-4efe-b7ab-805a3f499004.jpg?v=1631949846","width":2560},{"alt":"Sunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket - LeoForward Australia","id":24927422906523,"position":4,"preview_image":{"aspect_ratio":1.5,"height":1707,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71apFIBbxZL_c321afca-4c3c-4111-adfd-f327de83ec55.jpg?v=1631949846"},"aspect_ratio":1.5,"height":1707,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71apFIBbxZL_c321afca-4c3c-4111-adfd-f327de83ec55.jpg?v=1631949846","width":2560},{"alt":"Sunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket - LeoForward Australia","id":24927422939291,"position":5,"preview_image":{"aspect_ratio":1.5,"height":1707,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81ESBJZUXDL_c013bf40-311d-44fe-ac38-db9b77046f49.jpg?v=1631949846"},"aspect_ratio":1.5,"height":1707,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81ESBJZUXDL_c013bf40-311d-44fe-ac38-db9b77046f49.jpg?v=1631949846","width":2560},{"alt":"Sunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket - LeoForward Australia","id":24927422972059,"position":6,"preview_image":{"aspect_ratio":1.801,"height":833,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61OFS6c_wOL_7609d916-b1ee-42e8-84fd-2ba0a8d23363.jpg?v=1631949846"},"aspect_ratio":1.801,"height":833,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61OFS6c_wOL_7609d916-b1ee-42e8-84fd-2ba0a8d23363.jpg?v=1631949846","width":1500},{"alt":"Sunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket - LeoForward Australia","id":24927423004827,"position":7,"preview_image":{"aspect_ratio":0.752,"height":500,"width":376,"src":"\/\/leoforward.com\/cdn\/shop\/products\/21pi8RgDBEL.jpg?v=1631949846"},"aspect_ratio":0.752,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/21pi8RgDBEL.jpg?v=1631949846","width":376}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSunex 218z 1\/2-Inch Drive 9\/16-Inch 12-Point Impact Socket\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eNo doubt, the strongest impact socket line around. Sunex Tools impact sockets\ntackle the toughest jobs with a chrome molybdenum alloy steel grip that won't\nlet go. With solid durability that keeps them driving through job after job,\nwe've got sizes and styles enough to fulfill any need.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eForged from the finest chrome molybdenum alloy steel-the best choice for strength and durability\u003c\/li\u003e\n \u003cli\u003eRadius corner design-to extend the life of fasteners\u003c\/li\u003e\n \u003cli\u003eThe design drives the side of the fastener instead of the corner\u003c\/li\u003e\n \u003cli\u003eProvides increased strength, but also avoids rounding of rusted or damaged fasteners\u003c\/li\u003e\n \u003cli\u003e1\/2-Inch drive, 9\/16-Inch, 12 point impact socket\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7073579597979,"title":"Sunex 309m 3\/8-Inch Drive 9-Mm Impact Socket","handle":"sunex-309m-3-8-inch-drive-9-mm-impact-socket","description":"\u003ch3\u003eSunex 309m 3\/8-Inch Drive 9-Mm Impact Socket\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eNo doubt, the strongest impact socket line around. Sunex Tools impact sockets\ntackle the toughest jobs with a chrome molybdenum alloy steel grip that won't\nlet go. With solid durability that keeps them driving through job after job,\nwe've got sizes and styles enough to fulfill any need.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eForged from the finest chrome molybdenum alloy steel-the best choice for strength and durability\u003c\/li\u003e\n \u003cli\u003eRadius corner design - to extend the life of fasteners\u003c\/li\u003e\n \u003cli\u003eThe design drives the side of the fastener instead of the corner\u003c\/li\u003e\n \u003cli\u003e3\/8-Inch drive\u003c\/li\u003e\n \u003cli\u003e9mm impact socket\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-17T20:44:54+10:00","created_at":"2021-09-17T20:44:54+10:00","vendor":"Sunex Tools","type":"Triple Square Drive","tags":["cocoon"],"price":9900,"price_min":9900,"price_max":9900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41160501362843,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000TRL3L4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sunex 309m 3\/8-Inch Drive 9-Mm Impact Socket","public_title":null,"options":["Default Title"],"price":9900,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"613364603093","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B000TRL3L4.jpg?v=1651465630"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B000TRL3L4.jpg?v=1651465630","options":["Title"],"media":[{"alt":"Sunex 309m 3\/8-Inch Drive 9-Mm Impact Socket - LeoForward Australia","id":29663637078253,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B000TRL3L4.jpg?v=1651465630"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B000TRL3L4.jpg?v=1651465630","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSunex 309m 3\/8-Inch Drive 9-Mm Impact Socket\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eNo doubt, the strongest impact socket line around. Sunex Tools impact sockets\ntackle the toughest jobs with a chrome molybdenum alloy steel grip that won't\nlet go. With solid durability that keeps them driving through job after job,\nwe've got sizes and styles enough to fulfill any need.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eForged from the finest chrome molybdenum alloy steel-the best choice for strength and durability\u003c\/li\u003e\n \u003cli\u003eRadius corner design - to extend the life of fasteners\u003c\/li\u003e\n \u003cli\u003eThe design drives the side of the fastener instead of the corner\u003c\/li\u003e\n \u003cli\u003e3\/8-Inch drive\u003c\/li\u003e\n \u003cli\u003e9mm impact socket\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7073563902107,"title":"Sunex 10005 3\/8-Inch Drive Fuel Filter Banjo Bolt Socket","handle":"sunex-10005-3-8-inch-drive-fuel-filter-banjo-bolt-socket","description":"\u003ch3\u003eSunex 10005 3\/8-Inch Drive Fuel Filter Banjo Bolt Socket\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDesigned to be used on most Honda and Acura fuel-injected models since 1986,\nthis specialty socket has been designed to easily remove and replace the\nspecially shaped banjo bolt used to attach the fuel line to the fuel filter.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSocket fits completely over the banjo bolt for 360-Degree of contact\u003c\/li\u003e\n \u003cli\u003eFull contact eliminate es the risk of stripping the bolt\u003c\/li\u003e\n \u003cli\u003eLifetime warranty\u003c\/li\u003e\n \u003cli\u003eFor Honda and Acura vehicles\u003c\/li\u003e\n \u003cli\u003eFully guaranteed\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-17T20:38:45+10:00","created_at":"2021-09-17T20:38:45+10:00","vendor":"Sunex Tools","type":"Triple Square Drive","tags":["cocoon"],"price":11900,"price_min":11900,"price_max":11900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41160436580507,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B007RLEA3S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sunex 10005 3\/8-Inch Drive Fuel Filter Banjo Bolt Socket","public_title":null,"options":["Default Title"],"price":11900,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"613364065099","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B007RLEA3S.jpg?v=1651465151"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B007RLEA3S.jpg?v=1651465151","options":["Title"],"media":[{"alt":"Sunex 10005 3\/8-Inch Drive Fuel Filter Banjo Bolt Socket - LeoForward Australia","id":29663611912429,"position":1,"preview_image":{"aspect_ratio":0.987,"height":1200,"width":1184,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B007RLEA3S.jpg?v=1651465151"},"aspect_ratio":0.987,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B007RLEA3S.jpg?v=1651465151","width":1184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSunex 10005 3\/8-Inch Drive Fuel Filter Banjo Bolt Socket\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDesigned to be used on most Honda and Acura fuel-injected models since 1986,\nthis specialty socket has been designed to easily remove and replace the\nspecially shaped banjo bolt used to attach the fuel line to the fuel filter.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSocket fits completely over the banjo bolt for 360-Degree of contact\u003c\/li\u003e\n \u003cli\u003eFull contact eliminate es the risk of stripping the bolt\u003c\/li\u003e\n \u003cli\u003eLifetime warranty\u003c\/li\u003e\n \u003cli\u003eFor Honda and Acura vehicles\u003c\/li\u003e\n \u003cli\u003eFully guaranteed\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7073538244763,"title":"Stanley Proto J4990-5MXL 3\/8\" Drive Extra Long Hex Bit Socket, 5mm","handle":"stanley-proto-j4990-5mxl-3-8-drive-extra-long-hex-bit-socket-5mm","description":"\u003ch3\u003eStanley Proto J4990-5MXL 3\/8\" Drive Extra Long Hex Bit Socket, 5mm\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStanley J4990-5MXL Proto 3\/8-inch Drive Extra Long Hex Bit Socket - 5 mm Made\nusing a heat-treated alloy for wear-resistance which helps minimize distortion\nfor a long life. 5mm Size 13\/64-inch Bit Length 6-3\/32-inch Overall length\n0.17-lbs Weight.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMade using a heat-treated alloy for wear-resistance which helps minimize distortion for a long life\u003c\/li\u003e\n \u003cli\u003ePrecise 5mm Size\u003c\/li\u003e\n \u003cli\u003e13\/64-inch Bit Length\u003c\/li\u003e\n \u003cli\u003e6-3\/32-inch Overall length\u003c\/li\u003e\n \u003cli\u003e0.17-lbs Weight, Made in USA\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-17T20:33:04+10:00","created_at":"2021-09-17T20:33:04+10:00","vendor":"Proto","type":"Triple Square Drive","tags":["cocoon"],"price":13400,"price_min":13400,"price_max":13400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41160356561051,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00018AHHC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Stanley Proto J4990-5MXL 3\/8\" Drive Extra Long Hex Bit Socket, 5mm","public_title":null,"options":["Default Title"],"price":13400,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"662679160364","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B00018AHHC.jpg?v=1651464680"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B00018AHHC.jpg?v=1651464680","options":["Title"],"media":[{"alt":"Stanley Proto J4990-5MXL 3\/8\" Drive Extra Long Hex Bit Socket, 5mm - LeoForward Australia","id":29663585206509,"position":1,"preview_image":{"aspect_ratio":2.439,"height":1000,"width":2439,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B00018AHHC.jpg?v=1651464680"},"aspect_ratio":2.439,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B00018AHHC.jpg?v=1651464680","width":2439}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eStanley Proto J4990-5MXL 3\/8\" Drive Extra Long Hex Bit Socket, 5mm\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStanley J4990-5MXL Proto 3\/8-inch Drive Extra Long Hex Bit Socket - 5 mm Made\nusing a heat-treated alloy for wear-resistance which helps minimize distortion\nfor a long life. 5mm Size 13\/64-inch Bit Length 6-3\/32-inch Overall length\n0.17-lbs Weight.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMade using a heat-treated alloy for wear-resistance which helps minimize distortion for a long life\u003c\/li\u003e\n \u003cli\u003ePrecise 5mm Size\u003c\/li\u003e\n \u003cli\u003e13\/64-inch Bit Length\u003c\/li\u003e\n \u003cli\u003e6-3\/32-inch Overall length\u003c\/li\u003e\n \u003cli\u003e0.17-lbs Weight, Made in USA\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7073529528475,"title":"OTC (6110) Standard TORX Socket - T50, 3\/8\" Square Drive","handle":"otc-6110-standard-torx-socket-t50-3-8-square-drive","description":"\u003ch3\u003eOTC (6110) Standard TORX Socket - T50, 3\/8\" Square Drive\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe OTC 6110 is a specialty bit socket with Torx family profile. Specialty\nfasteners from the Torx family are used in many aspects of assemblies. Made\nwith two piece construction S2 grade steel, one of the highest quality tool\ngrade steels used in production, this bit socket is designed for endurance. A\nnatural finish ensures that this socket won’t crack or peel like many chrome\nplated versions can. NOTE: This high quality bit socket will provide a\nlifetime of performance when used with hand tools. Determination of damage by\nimpact tools is subject to OTC evaluation and discretion - NO EXCEPTIONS!\nReplacement bit sockets are available for sale.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eT50 with a 3\/8 inch square drive\u003c\/li\u003e\n \u003cli\u003eMade with two piece construction S2 grade steel, one of the highest quality tool grade steels used in production, this bit socket is designed for endurance\u003c\/li\u003e\n \u003cli\u003eA natural finish ensures that this socket wont crack or peel like many chrome plated versions can\u003c\/li\u003e\n \u003cli\u003eThis high quality bit socket will provide a lifetime of performance when used with hand tools\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-17T20:31:40+10:00","created_at":"2021-09-17T20:31:40+10:00","vendor":"OTC","type":"Square Drive","tags":["cocoon"],"price":11800,"price_min":11800,"price_max":11800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41160330576027,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0002SR28I","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"OTC (6110) Standard TORX Socket - T50, 3\/8\" Square Drive","public_title":null,"options":["Default Title"],"price":11800,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"731413030390","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B0002SR28I.jpg?v=1651464562"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B0002SR28I.jpg?v=1651464562","options":["Title"],"media":[{"alt":"OTC (6110) Standard TORX Socket - T50, 3\/8\" Square Drive - LeoForward Australia","id":29663580160237,"position":1,"preview_image":{"aspect_ratio":1.723,"height":806,"width":1389,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B0002SR28I.jpg?v=1651464562"},"aspect_ratio":1.723,"height":806,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B0002SR28I.jpg?v=1651464562","width":1389}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eOTC (6110) Standard TORX Socket - T50, 3\/8\" Square Drive\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe OTC 6110 is a specialty bit socket with Torx family profile. Specialty\nfasteners from the Torx family are used in many aspects of assemblies. Made\nwith two piece construction S2 grade steel, one of the highest quality tool\ngrade steels used in production, this bit socket is designed for endurance. A\nnatural finish ensures that this socket won’t crack or peel like many chrome\nplated versions can. NOTE: This high quality bit socket will provide a\nlifetime of performance when used with hand tools. Determination of damage by\nimpact tools is subject to OTC evaluation and discretion - NO EXCEPTIONS!\nReplacement bit sockets are available for sale.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eT50 with a 3\/8 inch square drive\u003c\/li\u003e\n \u003cli\u003eMade with two piece construction S2 grade steel, one of the highest quality tool grade steels used in production, this bit socket is designed for endurance\u003c\/li\u003e\n \u003cli\u003eA natural finish ensures that this socket wont crack or peel like many chrome plated versions can\u003c\/li\u003e\n \u003cli\u003eThis high quality bit socket will provide a lifetime of performance when used with hand tools\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7052112232603,"title":"Stanley Proto J5010 3\/8\" Drive Deep Socket, 5\/16\", 12 Point","handle":"stanley-proto-j5010-3-8-drive-deep-socket-5-16-12-point","description":"\u003ch3\u003eStanley Proto J5010 3\/8\" Drive Deep Socket, 5\/16\", 12 Point\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStanley J5010 Proto 3\/8-inch Drive Deep Socket 5\/16-inch - 12 Point Proto 12\nPoint Sockets are ideal for use on stubborn or damaged fasteners and also on\nfasteners made from soft materials. The Torque Plus design is a high\nperformance drive configuration which allows for quick and easy socket\nengagement to the fastener flats, not the corners. The Torque Plus\nconfiguration employs a radius-corner design, shifting contact area and stress\naway from the fastener corners and distributing contact stresses over a large\narea of the socket, minimizing slippage. The Torque Plus internal design\nminimizes fastener rounding, helps to extend fastener life and allows the user\nto more easily turn worn, rounded, or rusted fasteners.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eProto 12 Point Sockets are ideal for use on stubborn or damaged fasteners and also on fasteners made from soft materials\u003c\/li\u003e\n \u003cli\u003eThe Torque Plus design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats\u003c\/li\u003e\n \u003cli\u003eThe Torque Plus configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners\u003c\/li\u003e\n \u003cli\u003eThe Torque Plus internal design minimizes fastener rounding, helps to extend fastener life\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-08T18:36:00+10:00","created_at":"2021-09-08T18:36:00+10:00","vendor":"Proto","type":"Triple Square Drive","tags":["cocoon","no_prime_third_party"],"price":11000,"price_min":11000,"price_max":11000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41083209384091,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00018AJ1Q","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Stanley Proto J5010 3\/8\" Drive Deep Socket, 5\/16\", 12 Point","public_title":null,"options":["Default Title"],"price":11000,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"662679160678","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B00018AJ1Q.jpg?v=1651418490"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B00018AJ1Q.jpg?v=1651418490","options":["Title"],"media":[{"alt":"Stanley Proto J5010 3\/8\" Drive Deep Socket, 5\/16\", 12 Point - LeoForward Australia","id":29662029873389,"position":1,"preview_image":{"aspect_ratio":0.408,"height":2451,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B00018AJ1Q.jpg?v=1651418490"},"aspect_ratio":0.408,"height":2451,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B00018AJ1Q.jpg?v=1651418490","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eStanley Proto J5010 3\/8\" Drive Deep Socket, 5\/16\", 12 Point\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStanley J5010 Proto 3\/8-inch Drive Deep Socket 5\/16-inch - 12 Point Proto 12\nPoint Sockets are ideal for use on stubborn or damaged fasteners and also on\nfasteners made from soft materials. The Torque Plus design is a high\nperformance drive configuration which allows for quick and easy socket\nengagement to the fastener flats, not the corners. The Torque Plus\nconfiguration employs a radius-corner design, shifting contact area and stress\naway from the fastener corners and distributing contact stresses over a large\narea of the socket, minimizing slippage. The Torque Plus internal design\nminimizes fastener rounding, helps to extend fastener life and allows the user\nto more easily turn worn, rounded, or rusted fasteners.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eProto 12 Point Sockets are ideal for use on stubborn or damaged fasteners and also on fasteners made from soft materials\u003c\/li\u003e\n \u003cli\u003eThe Torque Plus design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats\u003c\/li\u003e\n \u003cli\u003eThe Torque Plus configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners\u003c\/li\u003e\n \u003cli\u003eThe Torque Plus internal design minimizes fastener rounding, helps to extend fastener life\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}