{"id":7024011444379,"title":"Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink\/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension P165-B((11mm Embedded Heatsink )","handle":"geekworm-raspberry-pi-4-11mm-embedded-heatsink-p165-b-raspberry-pi-4-heatsink-radiator-compatible-with-raspberry-pi-4-model-b-computer-and-pi-4-expansion-board-support-poe-extension-p165-b-11mm-embedded-heatsink-1","description":"\u003ch3\u003eGeekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink\/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Note: 1. This is a new version P165-B embedded\nheatsink with 11mm thickness. 2. The P165-B embedded heatsink support install\nthe 30mm cooling fan. You can use 3010 fan or 3007 fan. No cooling fan\nincluded in the packing list. 3. Add one piece thermal tape as gift in case\nyou will need. But it is strongly recommend to use the CPU thermal conductive\ngrease(not included) to attach on the CPU\/RAM of Raspberry Pi 4 to get better\nheat dissipation. Due to shipping restrictions, please prepare the CPU grease\nif you need. 4. The Raspberry Pi 4 board or TF card is NOT included in the\npacking list. Overview This P165-B is an upgraded version of P165-A, which is\nperfectly compatible with POE Extension. Geekworm design new version embedded\narmor aluminum alloy heatsink(P165-B) to slove Raspberry Pi 4 excessive heat\ngeneration problem when use Raspberry Pi 4 Model B with its expansion board.\nThis heatsink can also be used with a 30mm cooling fan above. The Raspberry Pi\n4 POE port is available to use now for the new version. Key Features: Only\nsupports Raspberry Pi 4 Model B;Supports to cooling down the Raspberry Pi 4\nboard when using the Pi 4 expansion board;Equipped with only 4pcs M2.5x5+5mm\nspacers; you will need to prepare extra standoffs or screws for Raspberry Pi 4\nwith other expansion boards.Raspberry Pi HAT positioning hole is M2.5 internal\nthread; (this design is convenient to fix)Supports the installation of 30mm\nfans; Cooling fan can be added when the heat dissipation of a single aluminum\nheat sink is not enough, so that all heat dissipation problems can be solved.\n(3010 fan or 3007 fan is OK to use)Reserve POE port of Raspberry Pi 4, the POE\nport is available to use. Heatsink size: 65x55x11mm\/2.55x2.16x0.43inch FAQ 1.\nWhy design this new P165-B 11mm embedded heatsink? A: We found that the copper\nspacers height required for most Raspberry Pi expansion boards is 11mm, so we\ndesigned this 11mm embedded heatsink(P165-B). Compared with the old\nmodel(P165-A), the heat dissipation area is increased and the heat dissipation\neffect will be better; at the same time, this new version support POE\nextension; 2. What if the Raspberry Pi 4 expansion board comes into contact\nwith the heatsink? A: Please use the 220 female header to add the height of\nexpanion board. (If you need gpio extension, please refer to B0827THC7R)\n3. What to do if the heat dissipation is not enough? A: The P165-B heatsink\nthickness is 11mm, if the Pi 4 overclock for a long time, the heat dissipation\nmay be insufficient and you need to add a cooling fan above the heatsink, the\nheatsink can support 3007 or 3010 cooling fan installation. 4. Does the\nheatsink support PoE expansion Board? A: The P165-B heatsink reserves POE port\nof Raspberry Pi 4, the POE port is available to use. But the compatibility\nneed to tested, there are different PoE expansion boards on the market.\nPacking list 1 x 11mm armor heatsink(P165-B)4 x M2.5x5+5mm spacers1 x thermal\ntape( as free gift, only use it when you need) Read more Compare P165-B and\nP165-A 11mm Embedded Heatsink(P165-B) 7mm Embedded Heatsink(P165-A) with 2507\nCooling Fan 12mm Aluminum Alloy Heatsink (C235) Heatsink Dimensions\n6.5x5.5x1.1cm\/2.55x2.16x0.43inch 6.5x5.5x7cm\/2.55x2.16x0.27inch\n5.4x3.9x1.2cm\/2.12x1.53x0.47inch Support Cooling Fan support 30mm cooling fan\nsupport 25mm cooling fan support 30mm cooling fan Fan hole spacing\n23mm\/0.91inch 20mm\/0.78inch 23mm\/0.91inch PoE Port Yes, reserve PoE port Yes,\nreserve PoE port Heatsink Thickness 11mm\/0.43inch 7mm\/0.27inch 12mm\/0.47inch\nPacking List 1x 11mm armor heatsink(P165-B); 4x M2.5x5+5mm spacers 1x 7mm\narmor heatsink(P165-A); 1 x 2507 cooling fan; 4 x M2.5x5 +4mm Spacers; 4 x\nM2.5x5 +5mm Spacers; 4 x M2.5x13 +6mm Spacers; 4 x M2.5x14 +6mm Spacers; 4 x\nM2.5x15 +6mm Spacers; 4 x M2.5x16 +6mm Spacers; 1 x thermal tape (cut for CPU\nand RAM) 1x 12mm heatsink for CM4 ; 4x PM2.5x16mm Screws; 4x M2.5 Nuts; 1x\nThermal Tape(attach on the CPU of CM4) Compatible With Raspberry Pi 4 and its\nexpansion boards Raspberry Pi 4 and its expansion boards Raspberry Pi Compute\nModule 4 CM4\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eNew version Geekworm embedded armor aluminum alloy Heatsink (P165-B) is only designed for Raspberry Pi 4 Model B 1GB\/2GB\/4GB\/8GB Version, embedded heatsink with 11mm thickness. User manual, refer to Geekworm WiKi search P165.\u003c\/li\u003e\n \u003cli\u003eSupports to cooling down the Raspberry Pi 4 board with Pi 4 expansion board(reserve the PoE port of Pi 4); Compatible with Raspberry Pi 4 expansion board to slove the raspberry pi 4 overheat problem, BUT you will need to prepare the proper standoffs or screws to use the P165-B with other expansion board.\u003c\/li\u003e\n \u003cli\u003eRecommend to use CPU thermal conductive greaseThe theoretical value of the gap between the heatsink protrusions and the CPU, RAM and other chips of Pi 4 is 0mm; It is strongly recommend to use CPU grease to get better heat dissipation;\u003c\/li\u003e\n \u003cli\u003eOnly equipped with 4pcs M2.5X5+5mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards.\u003c\/li\u003e\n \u003cli\u003eSupports the installation of 30mm fan(3010 or 3007 fan); Cooling fan can be added when the heat dissipation of a single aluminum heatsink is not enough, so that all Raspberry Pi 4 heat dissipation problems can be solved.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-27T16:57:39+10:00","created_at":"2021-08-27T16:57:39+10:00","vendor":"Geekworm","type":"Single Board Computers","tags":["cocoon"],"price":10100,"price_min":10100,"price_max":10100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40983583916187,"title":"P165-B((11mm Embedded Heatsink )","option1":"P165-B((11mm Embedded Heatsink )","option2":null,"option3":null,"sku":"B08N5VZN8R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink\/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension P165-B((11mm Embedded Heatsink ) - P165-B((11mm Embedded Heatsink )","public_title":"P165-B((11mm Embedded Heatsink )","options":["P165-B((11mm Embedded Heatsink )"],"price":10100,"weight":41,"compare_at_price":null,"inventory_management":null,"barcode":"TB-2020-12","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B08N5VZN8R.jpg?v=1651393969","\/\/leoforward.com\/cdn\/shop\/products\/71Vkcvqk41L.jpg?v=1632415186","\/\/leoforward.com\/cdn\/shop\/products\/71f-zgTCo6L.jpg?v=1632415186","\/\/leoforward.com\/cdn\/shop\/products\/71RCGrQadaL.jpg?v=1632415186","\/\/leoforward.com\/cdn\/shop\/products\/71kJYlZ6qpL.jpg?v=1632415186","\/\/leoforward.com\/cdn\/shop\/products\/51e7LlMRtUL.jpg?v=1632415186"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B08N5VZN8R.jpg?v=1651393969","options":["Color"],"media":[{"alt":"Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink\/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension P165-B((11mm Embedded Heatsink ) - LeoForward Australia","id":29661389455597,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B08N5VZN8R.jpg?v=1651393969"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B08N5VZN8R.jpg?v=1651393969","width":1600},{"alt":"Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink\/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension P165-B((11mm Embedded Heatsink ) - LeoForward Australia","id":24647137231003,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71Vkcvqk41L.jpg?v=1632415186"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71Vkcvqk41L.jpg?v=1632415186","width":1600},{"alt":"Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink\/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension P165-B((11mm Embedded Heatsink ) - LeoForward Australia","id":24647137263771,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71f-zgTCo6L.jpg?v=1632415186"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71f-zgTCo6L.jpg?v=1632415186","width":1600},{"alt":"Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink\/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension P165-B((11mm Embedded Heatsink ) - LeoForward Australia","id":24647137296539,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71RCGrQadaL.jpg?v=1632415186"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71RCGrQadaL.jpg?v=1632415186","width":1600},{"alt":"Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink\/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension P165-B((11mm Embedded Heatsink ) - LeoForward Australia","id":24647137329307,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71kJYlZ6qpL.jpg?v=1632415186"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71kJYlZ6qpL.jpg?v=1632415186","width":1600},{"alt":"Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink\/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension P165-B((11mm Embedded Heatsink ) - LeoForward Australia","id":24647137362075,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51e7LlMRtUL.jpg?v=1632415186"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51e7LlMRtUL.jpg?v=1632415186","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eGeekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink\/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Note: 1. This is a new version P165-B embedded\nheatsink with 11mm thickness. 2. The P165-B embedded heatsink support install\nthe 30mm cooling fan. You can use 3010 fan or 3007 fan. No cooling fan\nincluded in the packing list. 3. Add one piece thermal tape as gift in case\nyou will need. But it is strongly recommend to use the CPU thermal conductive\ngrease(not included) to attach on the CPU\/RAM of Raspberry Pi 4 to get better\nheat dissipation. Due to shipping restrictions, please prepare the CPU grease\nif you need. 4. The Raspberry Pi 4 board or TF card is NOT included in the\npacking list. Overview This P165-B is an upgraded version of P165-A, which is\nperfectly compatible with POE Extension. Geekworm design new version embedded\narmor aluminum alloy heatsink(P165-B) to slove Raspberry Pi 4 excessive heat\ngeneration problem when use Raspberry Pi 4 Model B with its expansion board.\nThis heatsink can also be used with a 30mm cooling fan above. The Raspberry Pi\n4 POE port is available to use now for the new version. Key Features: Only\nsupports Raspberry Pi 4 Model B;Supports to cooling down the Raspberry Pi 4\nboard when using the Pi 4 expansion board;Equipped with only 4pcs M2.5x5+5mm\nspacers; you will need to prepare extra standoffs or screws for Raspberry Pi 4\nwith other expansion boards.Raspberry Pi HAT positioning hole is M2.5 internal\nthread; (this design is convenient to fix)Supports the installation of 30mm\nfans; Cooling fan can be added when the heat dissipation of a single aluminum\nheat sink is not enough, so that all heat dissipation problems can be solved.\n(3010 fan or 3007 fan is OK to use)Reserve POE port of Raspberry Pi 4, the POE\nport is available to use. Heatsink size: 65x55x11mm\/2.55x2.16x0.43inch FAQ 1.\nWhy design this new P165-B 11mm embedded heatsink? A: We found that the copper\nspacers height required for most Raspberry Pi expansion boards is 11mm, so we\ndesigned this 11mm embedded heatsink(P165-B). Compared with the old\nmodel(P165-A), the heat dissipation area is increased and the heat dissipation\neffect will be better; at the same time, this new version support POE\nextension; 2. What if the Raspberry Pi 4 expansion board comes into contact\nwith the heatsink? A: Please use the 220 female header to add the height of\nexpanion board. (If you need gpio extension, please refer to B0827THC7R)\n3. What to do if the heat dissipation is not enough? A: The P165-B heatsink\nthickness is 11mm, if the Pi 4 overclock for a long time, the heat dissipation\nmay be insufficient and you need to add a cooling fan above the heatsink, the\nheatsink can support 3007 or 3010 cooling fan installation. 4. Does the\nheatsink support PoE expansion Board? A: The P165-B heatsink reserves POE port\nof Raspberry Pi 4, the POE port is available to use. But the compatibility\nneed to tested, there are different PoE expansion boards on the market.\nPacking list 1 x 11mm armor heatsink(P165-B)4 x M2.5x5+5mm spacers1 x thermal\ntape( as free gift, only use it when you need) Read more Compare P165-B and\nP165-A 11mm Embedded Heatsink(P165-B) 7mm Embedded Heatsink(P165-A) with 2507\nCooling Fan 12mm Aluminum Alloy Heatsink (C235) Heatsink Dimensions\n6.5x5.5x1.1cm\/2.55x2.16x0.43inch 6.5x5.5x7cm\/2.55x2.16x0.27inch\n5.4x3.9x1.2cm\/2.12x1.53x0.47inch Support Cooling Fan support 30mm cooling fan\nsupport 25mm cooling fan support 30mm cooling fan Fan hole spacing\n23mm\/0.91inch 20mm\/0.78inch 23mm\/0.91inch PoE Port Yes, reserve PoE port Yes,\nreserve PoE port Heatsink Thickness 11mm\/0.43inch 7mm\/0.27inch 12mm\/0.47inch\nPacking List 1x 11mm armor heatsink(P165-B); 4x M2.5x5+5mm spacers 1x 7mm\narmor heatsink(P165-A); 1 x 2507 cooling fan; 4 x M2.5x5 +4mm Spacers; 4 x\nM2.5x5 +5mm Spacers; 4 x M2.5x13 +6mm Spacers; 4 x M2.5x14 +6mm Spacers; 4 x\nM2.5x15 +6mm Spacers; 4 x M2.5x16 +6mm Spacers; 1 x thermal tape (cut for CPU\nand RAM) 1x 12mm heatsink for CM4 ; 4x PM2.5x16mm Screws; 4x M2.5 Nuts; 1x\nThermal Tape(attach on the CPU of CM4) Compatible With Raspberry Pi 4 and its\nexpansion boards Raspberry Pi 4 and its expansion boards Raspberry Pi Compute\nModule 4 CM4\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eNew version Geekworm embedded armor aluminum alloy Heatsink (P165-B) is only designed for Raspberry Pi 4 Model B 1GB\/2GB\/4GB\/8GB Version, embedded heatsink with 11mm thickness. User manual, refer to Geekworm WiKi search P165.\u003c\/li\u003e\n \u003cli\u003eSupports to cooling down the Raspberry Pi 4 board with Pi 4 expansion board(reserve the PoE port of Pi 4); Compatible with Raspberry Pi 4 expansion board to slove the raspberry pi 4 overheat problem, BUT you will need to prepare the proper standoffs or screws to use the P165-B with other expansion board.\u003c\/li\u003e\n \u003cli\u003eRecommend to use CPU thermal conductive greaseThe theoretical value of the gap between the heatsink protrusions and the CPU, RAM and other chips of Pi 4 is 0mm; It is strongly recommend to use CPU grease to get better heat dissipation;\u003c\/li\u003e\n \u003cli\u003eOnly equipped with 4pcs M2.5X5+5mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards.\u003c\/li\u003e\n \u003cli\u003eSupports the installation of 30mm fan(3010 or 3007 fan); Cooling fan can be added when the heat dissipation of a single aluminum heatsink is not enough, so that all Raspberry Pi 4 heat dissipation problems can be solved.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension P165-B((11mm Embedded Heatsink )
Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4 Heatsink/Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension
Read more Note: 1. This is a new version P165-B embedded heatsink with 11mm thickness. 2. The P165-B embedded heatsink support install the 30mm cooling fan. You can use 3010 fan or 3007 fan. No cooling fan included in the packing list. 3. Add one piece thermal tape as gift in case you will need. But it is strongly recommend to use the CPU thermal conductive grease(not included) to attach on the CPU/RAM of Raspberry Pi 4 to get better heat dissipation. Due to shipping restrictions, please prepare the CPU grease if you need. 4. The Raspberry Pi 4 board or TF card is NOT included in the packing list. Overview This P165-B is an upgraded version of P165-A, which is perfectly compatible with POE Extension. Geekworm design new version embedded armor aluminum alloy heatsink(P165-B) to slove Raspberry Pi 4 excessive heat generation problem when use Raspberry Pi 4 Model B with its expansion board. This heatsink can also be used with a 30mm cooling fan above. The Raspberry Pi 4 POE port is available to use now for the new version. Key Features: Only supports Raspberry Pi 4 Model B;Supports to cooling down the Raspberry Pi 4 board when using the Pi 4 expansion board;Equipped with only 4pcs M2.5x5+5mm spacers; you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards.Raspberry Pi HAT positioning hole is M2.5 internal thread; (this design is convenient to fix)Supports the installation of 30mm fans; Cooling fan can be added when the heat dissipation of a single aluminum heat sink is not enough, so that all heat dissipation problems can be solved. (3010 fan or 3007 fan is OK to use)Reserve POE port of Raspberry Pi 4, the POE port is available to use. Heatsink size: 65x55x11mm/2.55x2.16x0.43inch FAQ 1. Why design this new P165-B 11mm embedded heatsink? A: We found that the copper spacers height required for most Raspberry Pi expansion boards is 11mm, so we designed this 11mm embedded heatsink(P165-B). Compared with the old model(P165-A), the heat dissipation area is increased and the heat dissipation effect will be better; at the same time, this new version support POE extension; 2. What if the Raspberry Pi 4 expansion board comes into contact with the heatsink? A: Please use the 220 female header to add the height of expanion board. (If you need gpio extension, please refer to B0827THC7R) 3. What to do if the heat dissipation is not enough? A: The P165-B heatsink thickness is 11mm, if the Pi 4 overclock for a long time, the heat dissipation may be insufficient and you need to add a cooling fan above the heatsink, the heatsink can support 3007 or 3010 cooling fan installation. 4. Does the heatsink support PoE expansion Board? A: The P165-B heatsink reserves POE port of Raspberry Pi 4, the POE port is available to use. But the compatibility need to tested, there are different PoE expansion boards on the market. Packing list 1 x 11mm armor heatsink(P165-B)4 x M2.5x5+5mm spacers1 x thermal tape( as free gift, only use it when you need) Read more Compare P165-B and P165-A 11mm Embedded Heatsink(P165-B) 7mm Embedded Heatsink(P165-A) with 2507 Cooling Fan 12mm Aluminum Alloy Heatsink (C235) Heatsink Dimensions 6.5x5.5x1.1cm/2.55x2.16x0.43inch 6.5x5.5x7cm/2.55x2.16x0.27inch 5.4x3.9x1.2cm/2.12x1.53x0.47inch Support Cooling Fan support 30mm cooling fan support 25mm cooling fan support 30mm cooling fan Fan hole spacing 23mm/0.91inch 20mm/0.78inch 23mm/0.91inch PoE Port Yes, reserve PoE port Yes, reserve PoE port Heatsink Thickness 11mm/0.43inch 7mm/0.27inch 12mm/0.47inch Packing List 1x 11mm armor heatsink(P165-B); 4x M2.5x5+5mm spacers 1x 7mm armor heatsink(P165-A); 1 x 2507 cooling fan; 4 x M2.5x5 +4mm Spacers; 4 x M2.5x5 +5mm Spacers; 4 x M2.5x13 +6mm Spacers; 4 x M2.5x14 +6mm Spacers; 4 x M2.5x15 +6mm Spacers; 4 x M2.5x16 +6mm Spacers; 1 x thermal tape (cut for CPU and RAM) 1x 12mm heatsink for CM4 ; 4x PM2.5x16mm Screws; 4x M2.5 Nuts; 1x Thermal Tape(attach on the CPU of CM4) Compatible With Raspberry Pi 4 and its expansion boards Raspberry Pi 4 and its expansion boards Raspberry Pi Compute Module 4 CM4
Product Features
- New version Geekworm embedded armor aluminum alloy Heatsink (P165-B) is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version, embedded heatsink with 11mm thickness. User manual, refer to Geekworm WiKi search P165.
- Supports to cooling down the Raspberry Pi 4 board with Pi 4 expansion board(reserve the PoE port of Pi 4); Compatible with Raspberry Pi 4 expansion board to slove the raspberry pi 4 overheat problem, BUT you will need to prepare the proper standoffs or screws to use the P165-B with other expansion board.
- Recommend to use CPU thermal conductive greaseThe theoretical value of the gap between the heatsink protrusions and the CPU, RAM and other chips of Pi 4 is 0mm; It is strongly recommend to use CPU grease to get better heat dissipation;
- Only equipped with 4pcs M2.5X5+5mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards.
- Supports the installation of 30mm fan(3010 or 3007 fan); Cooling fan can be added when the heat dissipation of a single aluminum heatsink is not enough, so that all Raspberry Pi 4 heat dissipation problems can be solved.
Related Products
Smraza Super Starter Kit Project...
$214.00 AUD
{"id":7140751114395,"title":"Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino","handle":"smraza-super-starter-kit-project-kit-with-breadboard-power-supply-jumper-wires-resistors-led-lcd-1602-sensors-detailed-tutorial-for-project-compatible-with-arduino","description":"\u003ch3\u003eSmraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more LCD1602 Display Lesson The display has an LED\nbacklight and it can display two rows with up to 16 characters on each row.\nYou can also see the rectangles for each character on the display and the\npixels that make up each character. This LCD display is white on blue and is\nintended for showing text. We will run the Arduino example program for the LCD\nlibrary and learn how to control the LCD1602 Display in this lesson. We can\nattach a potentiometer for controlling the contrast of the display. Read more\nPower Supply Module Lesson The power supply module with a green\/red LED to\nindicate the presence of power, and an ON \/ OFF latching switch to control the\npower to the board. On this particular model and version, the center pin of\nthe barrel socket is positive. After connecting the wiring and uploading the\nArduino program, we can use the potentiometer to control the extent of LED\nblinking. Read more Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePDF Tutorial - Detailed PDF tutorial of 28 lessons with sample code and image instructions.\u003c\/li\u003e\n \u003cli\u003ePerfect Kit for Beginner - The most economical way for beginners to start programming. Compatible with Arduino r3, mega, nano.\u003c\/li\u003e\n \u003cli\u003eNo Need Solder - LCD1602 module with pin header (no need to be soldered by yourself).\u003c\/li\u003e\n \u003cli\u003eUpgraded starter kits - Come with power supply module, 9V battery with dc.\u003c\/li\u003e\n \u003cli\u003eGood quality storage box with divider plates- Avoid to mess up and get a tidy box.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-10-05T18:40:16+11:00","created_at":"2021-10-05T18:40:16+11:00","vendor":"Smraza","type":"Single Board Computers","tags":["cocoon"],"price":21400,"price_min":21400,"price_max":21400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41323365990555,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01L0ZL8N6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino","public_title":null,"options":["Default Title"],"price":21400,"weight":660,"compare_at_price":null,"inventory_management":null,"barcode":"S26s","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B01L0ZL8N6.jpg?v=1651507087","\/\/leoforward.com\/cdn\/shop\/products\/81LnL3IWFHL.jpg?v=1633420164","\/\/leoforward.com\/cdn\/shop\/products\/71k7W7bwbHL.jpg?v=1633420164","\/\/leoforward.com\/cdn\/shop\/products\/71ZWvNQJvTL.jpg?v=1633420164","\/\/leoforward.com\/cdn\/shop\/products\/71KMQeP00FL.jpg?v=1633420164","\/\/leoforward.com\/cdn\/shop\/products\/71z_NoKQWtL.jpg?v=1633420164","\/\/leoforward.com\/cdn\/shop\/products\/71EYkRkkSIL.jpg?v=1633420164","\/\/leoforward.com\/cdn\/shop\/products\/81jI0iOjIuL.jpg?v=1633420164"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B01L0ZL8N6.jpg?v=1651507087","options":["Title"],"media":[{"alt":"Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino - LeoForward Australia","id":29669169660141,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B01L0ZL8N6.jpg?v=1651507087"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B01L0ZL8N6.jpg?v=1651507087","width":1500},{"alt":"Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino - LeoForward Australia","id":25215681200283,"position":2,"preview_image":{"aspect_ratio":1.001,"height":1500,"width":1501,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81LnL3IWFHL.jpg?v=1633420164"},"aspect_ratio":1.001,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81LnL3IWFHL.jpg?v=1633420164","width":1501},{"alt":"Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino - LeoForward Australia","id":25215681233051,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71k7W7bwbHL.jpg?v=1633420164"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71k7W7bwbHL.jpg?v=1633420164","width":1500},{"alt":"Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino - LeoForward Australia","id":25215681265819,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71ZWvNQJvTL.jpg?v=1633420164"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71ZWvNQJvTL.jpg?v=1633420164","width":1500},{"alt":"Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino - LeoForward Australia","id":25215681298587,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71KMQeP00FL.jpg?v=1633420164"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71KMQeP00FL.jpg?v=1633420164","width":1500},{"alt":"Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino - LeoForward Australia","id":25215681331355,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71z_NoKQWtL.jpg?v=1633420164"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71z_NoKQWtL.jpg?v=1633420164","width":1500},{"alt":"Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino - LeoForward Australia","id":25215681364123,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71EYkRkkSIL.jpg?v=1633420164"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71EYkRkkSIL.jpg?v=1633420164","width":1500},{"alt":"Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino - LeoForward Australia","id":25215681396891,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81jI0iOjIuL.jpg?v=1633420164"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81jI0iOjIuL.jpg?v=1633420164","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSmraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more LCD1602 Display Lesson The display has an LED\nbacklight and it can display two rows with up to 16 characters on each row.\nYou can also see the rectangles for each character on the display and the\npixels that make up each character. This LCD display is white on blue and is\nintended for showing text. We will run the Arduino example program for the LCD\nlibrary and learn how to control the LCD1602 Display in this lesson. We can\nattach a potentiometer for controlling the contrast of the display. Read more\nPower Supply Module Lesson The power supply module with a green\/red LED to\nindicate the presence of power, and an ON \/ OFF latching switch to control the\npower to the board. On this particular model and version, the center pin of\nthe barrel socket is positive. After connecting the wiring and uploading the\nArduino program, we can use the potentiometer to control the extent of LED\nblinking. Read more Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePDF Tutorial - Detailed PDF tutorial of 28 lessons with sample code and image instructions.\u003c\/li\u003e\n \u003cli\u003ePerfect Kit for Beginner - The most economical way for beginners to start programming. Compatible with Arduino r3, mega, nano.\u003c\/li\u003e\n \u003cli\u003eNo Need Solder - LCD1602 module with pin header (no need to be soldered by yourself).\u003c\/li\u003e\n \u003cli\u003eUpgraded starter kits - Come with power supply module, 9V battery with dc.\u003c\/li\u003e\n \u003cli\u003eGood quality storage box with divider plates- Avoid to mess up and get a tidy box.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino
$214.00 AUD
Smraza Super Starter Kit Project Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, LCD 1602, Sensors, Detailed Tutorial for Project, Compatible with Arduino Read more LCD1602 Display Lesson The display has an LED backlight and it can display two rows with up to 16 characters on each row. You can also see the rectangles for each ch...
Hahiyo Anodized Aluminum Thumbsc...
$107.00 AUD
{"id":7073556005019,"title":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs 6#-32-Green-10Pieces","handle":"hahiyo-anodized-aluminum-thumbscrews-6-32-thread-size-large-knurled-head-cage-mounts-hand-tighten-easy-to-grip-and-turn-not-damage-inside-sturdy-for-computer-case-pci-slot-motherboard-green-10pcs-6-32-green-10pieces","description":"\u003ch3\u003eHahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:6-32-Green-10Pieces Material:Aluminum Color:Green Quantity:10pieces\nSize:Thread size:6-32 The large knurled head thumbscrews are light and have a\ngood grip,longer thread allows for attaching computer case sides.No tools need\nto remove the ideal computer case panel.The bright color is done by\ncoating,not by paint,so it is anti-scratch.Widely applicable to most computer\ncases,PCI slots or motherboard installation.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOperate smoothly.Large knurled head is easy to grip and turn,longer thread allows for attaching computer case sides.It makes it easy to open\/close the case.The threads can easily cross thread.Will not damage the case finish and short inside.\u003c\/li\u003e\n \u003cli\u003eDurable.The head is flat on these so you had better not use a screwdriver to tighten or remove.From finding a screwdriver and then carefully removing the screws without scratching the nickel plate or stainless finish.\u003c\/li\u003e\n \u003cli\u003eThe bright color is done by coating,not by paint,so it is very sturdy,anti-scratch.Hold up for a long time.Perfect for lightsaber blade screws while adding some bling to the hilt at the same time.\u003c\/li\u003e\n \u003cli\u003eFunctional.The thumbscrews easily screwed into the motherboard standoffs.You can open PC case quickly without tools.Use these to hold the glass side panel for a mid tower PC case and expansion slots.They work great as replacements for regular PC case screws.Much more convenient for using in computers where you will be opening the case for regular cleaning or upgrades.\u003c\/li\u003e\n \u003cli\u003eSolid.Use high-quality aluminum material,anti-stripping,screw groove on the top,good weight,the thumbscrew design allows easy.High hardness,high strength,not easy to break.The surface is anodized to prevent rust and corrosion.Manual elastic design,convenient for manual operation.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-17T20:35:56+10:00","created_at":"2021-09-17T20:35:56+10:00","vendor":"Hahiyo","type":"Computer Screws","tags":["cocoon"],"price":10700,"price_min":10700,"price_max":10700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41160399028379,"title":"6#-32-Green-10Pieces","option1":"6#-32-Green-10Pieces","option2":null,"option3":null,"sku":"B091HMNKTQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs 6#-32-Green-10Pieces - 6#-32-Green-10Pieces","public_title":"6#-32-Green-10Pieces","options":["6#-32-Green-10Pieces"],"price":10700,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"802405451544","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B091HMNKTQ.jpg?v=1651464912","\/\/leoforward.com\/cdn\/shop\/products\/617I6g4x9aS.jpg?v=1631948411","\/\/leoforward.com\/cdn\/shop\/products\/411clqSnn9S.jpg?v=1631948411","\/\/leoforward.com\/cdn\/shop\/products\/51skawcSoRS.jpg?v=1631948411","\/\/leoforward.com\/cdn\/shop\/products\/61nTOdVkTGS.jpg?v=1631948411","\/\/leoforward.com\/cdn\/shop\/products\/61n_14D-xsS.jpg?v=1631948411","\/\/leoforward.com\/cdn\/shop\/products\/61USSAtUdES.jpg?v=1631948411"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B091HMNKTQ.jpg?v=1651464912","options":["Size"],"media":[{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs 6#-32-Green-10Pieces - LeoForward Australia","id":29663597494509,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B091HMNKTQ.jpg?v=1651464912"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B091HMNKTQ.jpg?v=1651464912","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs 6#-32-Green-10Pieces - LeoForward Australia","id":24927034769563,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/617I6g4x9aS.jpg?v=1631948411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/617I6g4x9aS.jpg?v=1631948411","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs 6#-32-Green-10Pieces - LeoForward Australia","id":24927034802331,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/411clqSnn9S.jpg?v=1631948411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/411clqSnn9S.jpg?v=1631948411","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs 6#-32-Green-10Pieces - LeoForward Australia","id":24927034835099,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51skawcSoRS.jpg?v=1631948411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51skawcSoRS.jpg?v=1631948411","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs 6#-32-Green-10Pieces - LeoForward Australia","id":24927034867867,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61nTOdVkTGS.jpg?v=1631948411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61nTOdVkTGS.jpg?v=1631948411","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs 6#-32-Green-10Pieces - LeoForward Australia","id":24927034900635,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61n_14D-xsS.jpg?v=1631948411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61n_14D-xsS.jpg?v=1631948411","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs 6#-32-Green-10Pieces - LeoForward Australia","id":24927034933403,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61USSAtUdES.jpg?v=1631948411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61USSAtUdES.jpg?v=1631948411","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eHahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:6-32-Green-10Pieces Material:Aluminum Color:Green Quantity:10pieces\nSize:Thread size:6-32 The large knurled head thumbscrews are light and have a\ngood grip,longer thread allows for attaching computer case sides.No tools need\nto remove the ideal computer case panel.The bright color is done by\ncoating,not by paint,so it is anti-scratch.Widely applicable to most computer\ncases,PCI slots or motherboard installation.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOperate smoothly.Large knurled head is easy to grip and turn,longer thread allows for attaching computer case sides.It makes it easy to open\/close the case.The threads can easily cross thread.Will not damage the case finish and short inside.\u003c\/li\u003e\n \u003cli\u003eDurable.The head is flat on these so you had better not use a screwdriver to tighten or remove.From finding a screwdriver and then carefully removing the screws without scratching the nickel plate or stainless finish.\u003c\/li\u003e\n \u003cli\u003eThe bright color is done by coating,not by paint,so it is very sturdy,anti-scratch.Hold up for a long time.Perfect for lightsaber blade screws while adding some bling to the hilt at the same time.\u003c\/li\u003e\n \u003cli\u003eFunctional.The thumbscrews easily screwed into the motherboard standoffs.You can open PC case quickly without tools.Use these to hold the glass side panel for a mid tower PC case and expansion slots.They work great as replacements for regular PC case screws.Much more convenient for using in computers where you will be opening the case for regular cleaning or upgrades.\u003c\/li\u003e\n \u003cli\u003eSolid.Use high-quality aluminum material,anti-stripping,screw groove on the top,good weight,the thumbscrew design allows easy.High hardness,high strength,not easy to break.The surface is anodized to prevent rust and corrosion.Manual elastic design,convenient for manual operation.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs 6#-32-Green-10Pieces
$107.00 AUD
Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Green 10pcs Size:6-32-Green-10Pieces Material:Aluminum Color:Green Quantity:10pieces Size:Thread size:6-32 The large knurled head thumbscrews are light and have a...
GeeekPi Raspberry Pi Zero/Zero W...
$108.00 AUD
{"id":7070505140379,"title":"GeeekPi Raspberry Pi Zero\/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear) Clear","handle":"geeekpi-raspberry-pi-zero-zero-w-case-7-in-1-basic-starter-kit-with-raspberry-pi-zero-heatsink-20pin-gpio-header-otg-cable-switch-cable-hdmi-adapter-and-screwdriver-clear-clear","description":"\u003ch3\u003eGeeekPi Raspberry Pi Zero\/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor:Clear 7 in 1 Raspberry Pi Zero Starter Kit NOTE: The Raspberry Pi Zero\nBoard is not included!Package Includes 1x Raspberry Pi Zero Case 1x Raspberry\nPi Zero Heatsink 1x Hdmi Adapter 1x Switch Cable(Micro USB Female to Micro USB\nMale) 1x Raspberry Pi Zero OTG Cable 1x Male GPIO Header 1x Screwdriver\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCompatible with Raspberry Pi Zero and Raspberry Pi Zero W (Raspberry Pi Zero Board is Not Included)\u003c\/li\u003e\n \u003cli\u003eThe heatsink is for better heat dissipation and GPIO header makes it easy to connect the GPIO ports.\u003c\/li\u003e\n \u003cli\u003eAcrylic case with 2 covers and screws to install.\u003c\/li\u003e\n \u003cli\u003eAccess to all ports of Raspberry Pi Zero Board.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-16T19:12:11+10:00","created_at":"2021-09-16T19:12:11+10:00","vendor":"GeeekPi","type":"Single Board Computers","tags":["cocoon"],"price":10800,"price_min":10800,"price_max":10800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41149010706587,"title":"Clear","option1":"Clear","option2":null,"option3":null,"sku":"B08V4R1DYB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"GeeekPi Raspberry Pi Zero\/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear) Clear - Clear","public_title":"Clear","options":["Clear"],"price":10800,"weight":69,"compare_at_price":null,"inventory_management":null,"barcode":"703501200220","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B08V4R1DYB.jpg?v=1651459847","\/\/leoforward.com\/cdn\/shop\/products\/514byfWqHnL.jpg?v=1631862845","\/\/leoforward.com\/cdn\/shop\/products\/513oX35OUfL.jpg?v=1631862845","\/\/leoforward.com\/cdn\/shop\/products\/51PksV3uvtL.jpg?v=1631862845","\/\/leoforward.com\/cdn\/shop\/products\/5135r-mNPmL.jpg?v=1631862845"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B08V4R1DYB.jpg?v=1651459847","options":["Color"],"media":[{"alt":"GeeekPi Raspberry Pi Zero\/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear) Clear - LeoForward Australia","id":29663388958957,"position":1,"preview_image":{"aspect_ratio":0.986,"height":500,"width":493,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B08V4R1DYB.jpg?v=1651459847"},"aspect_ratio":0.986,"height":500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B08V4R1DYB.jpg?v=1651459847","width":493},{"alt":"GeeekPi Raspberry Pi Zero\/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear) Clear - LeoForward Australia","id":24910313717915,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/514byfWqHnL.jpg?v=1631862845"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/514byfWqHnL.jpg?v=1631862845","width":1000},{"alt":"GeeekPi Raspberry Pi Zero\/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear) Clear - LeoForward Australia","id":24910313750683,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/513oX35OUfL.jpg?v=1631862845"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/513oX35OUfL.jpg?v=1631862845","width":1000},{"alt":"GeeekPi Raspberry Pi Zero\/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear) Clear - LeoForward Australia","id":24910313783451,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51PksV3uvtL.jpg?v=1631862845"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51PksV3uvtL.jpg?v=1631862845","width":1000},{"alt":"GeeekPi Raspberry Pi Zero\/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear) Clear - LeoForward Australia","id":24910313816219,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/5135r-mNPmL.jpg?v=1631862845"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/5135r-mNPmL.jpg?v=1631862845","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eGeeekPi Raspberry Pi Zero\/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor:Clear 7 in 1 Raspberry Pi Zero Starter Kit NOTE: The Raspberry Pi Zero\nBoard is not included!Package Includes 1x Raspberry Pi Zero Case 1x Raspberry\nPi Zero Heatsink 1x Hdmi Adapter 1x Switch Cable(Micro USB Female to Micro USB\nMale) 1x Raspberry Pi Zero OTG Cable 1x Male GPIO Header 1x Screwdriver\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCompatible with Raspberry Pi Zero and Raspberry Pi Zero W (Raspberry Pi Zero Board is Not Included)\u003c\/li\u003e\n \u003cli\u003eThe heatsink is for better heat dissipation and GPIO header makes it easy to connect the GPIO ports.\u003c\/li\u003e\n \u003cli\u003eAcrylic case with 2 covers and screws to install.\u003c\/li\u003e\n \u003cli\u003eAccess to all ports of Raspberry Pi Zero Board.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
GeeekPi Raspberry Pi Zero/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear) Clear
$108.00 AUD
GeeekPi Raspberry Pi Zero/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink , 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Clear) Color:Clear 7 in 1 Raspberry Pi Zero Starter Kit NOTE: The Raspberry Pi Zero Board is not included!Package Includes 1x Raspberry Pi Zero Case 1x Raspberry Pi Zero Heats...
CUQI Ultrasonic Module Distance ...
$98.00 AUD
{"id":7021175767195,"title":"CUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B (4PCS)… 4PCS","handle":"cuqi-ultrasonic-module-distance-measuring-sensor-module-kit-transmitter-and-receiver-module-compatible-with-diy-robot-car-raspberry-pi-4b-3b-3b-4pcs-4pcs","description":"\u003ch3\u003eCUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B (4PCS)…\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eWhat is the HC-SR04 Ultrasonic Sensor? HC-SR04 Ultrasonic\nSensor is a device that can measure the distance to an object by using sound\nwaves. It measures distance by sending out a sound wave at a specific\nfrequency and listening for that sound wave to bounce back. By recording the\nelapsed time between the sound wave being generated and the sound wave\nbouncing back, it is possible to calculate the distance between the sonar\nsensor and the object. Read more Parameter details Power Supply +5V DC\nQuiescent Current 3mA Working Current \u0026lt; 5mA Effectual Angle \u0026lt;15° Ranging\nDistance 2cm - 300 cm\/1″ - 10ft Accuracy 0.3 cm Measuring Angle 30 degree\nTrigger Input Pulse width 10uS Dimensions 45mm x 20mm x 15mm What project can\nUltrasonic Sensor be applied for? Ultrasonic Sensor HC-SR04 is great for all\nkinds of projects that need distance measurements, avoiding obstacles as\nexamples. HC-SR04 provides a 2cm-400cm non-contact measurement function, the\nranging accuracy can reach 3mm. The modules include ultrasonic transmitters,\nreceivers, and control circuits. Read more Operatiing Principle of Ultrasonic\nSensor As the name indicates, ultrasonic sensors measure distance by using\nultrasonic waves. The sensor head emits an ultrasonic wave and receives the\nwave reflected back from the target. Ultrasonic Sensors measure the distance\nto the target by measuring the time between the emission and reception. The\ndistance can be calculated with the following formula: Distance L = 1\/2 × T ×\nC where L is the distance, T is the time between the emission and reception,\nand C is the sonic speed. (The value is multiplied by 1\/2 because T is the\ntime for the go-and-return distance.) Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUltrasonic module distance measuring transducer sensor.\u003c\/li\u003e\n \u003cli\u003eHC-SR04 consists of ultrasonic transmitter, receiver, and control circuit. When trigged it sends out a series of 40KHz ultrasonic pulses and receives echo from an object.\u003c\/li\u003e\n \u003cli\u003ePower Supply: DC 5V, Quiescent Current: less than 2mA; effectual angle: less than 15; distance: 2cm-500cm.\u003c\/li\u003e\n \u003cli\u003eCompatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B\u003c\/li\u003e\n \u003cli\u003ePackage Content: 4Pcs HC-SR04.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-26T15:51:35+10:00","created_at":"2021-08-26T15:51:35+10:00","vendor":"CUQI","type":"Single Board Computers","tags":["cocoon"],"price":9800,"price_min":9800,"price_max":9800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40974759035035,"title":"4PCS","option1":"4PCS","option2":null,"option3":null,"sku":"B092D2DS1Y","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"CUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B (4PCS)… 4PCS - 4PCS","public_title":"4PCS","options":["4PCS"],"price":9800,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":"SB-122","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B092D2DS1Y.jpg?v=1651389049","\/\/leoforward.com\/cdn\/shop\/products\/61cF5YBofnS.jpg?v=1632414331","\/\/leoforward.com\/cdn\/shop\/products\/61Rwt2iuPDS.jpg?v=1632414331","\/\/leoforward.com\/cdn\/shop\/products\/61PHnXXEkWS.jpg?v=1632414331","\/\/leoforward.com\/cdn\/shop\/products\/61Fs-98UAdS.jpg?v=1632414332","\/\/leoforward.com\/cdn\/shop\/products\/6119vV_MeDS.jpg?v=1632414332"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B092D2DS1Y.jpg?v=1651389049","options":["Capacity"],"media":[{"alt":"CUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B (4PCS)… 4PCS - LeoForward Australia","id":29661296099565,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B092D2DS1Y.jpg?v=1651389049"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B092D2DS1Y.jpg?v=1651389049","width":1000},{"alt":"CUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B (4PCS)… 4PCS - LeoForward Australia","id":24631391584411,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61cF5YBofnS.jpg?v=1632414331"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61cF5YBofnS.jpg?v=1632414331","width":1000},{"alt":"CUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B (4PCS)… 4PCS - LeoForward Australia","id":24631391617179,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61Rwt2iuPDS.jpg?v=1632414331"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61Rwt2iuPDS.jpg?v=1632414331","width":1000},{"alt":"CUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B (4PCS)… 4PCS - LeoForward Australia","id":24631391649947,"position":4,"preview_image":{"aspect_ratio":1.194,"height":1049,"width":1252,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61PHnXXEkWS.jpg?v=1632414331"},"aspect_ratio":1.194,"height":1049,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61PHnXXEkWS.jpg?v=1632414331","width":1252},{"alt":"CUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B (4PCS)… 4PCS - LeoForward Australia","id":24631391682715,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61Fs-98UAdS.jpg?v=1632414332"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61Fs-98UAdS.jpg?v=1632414332","width":1000},{"alt":"CUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B (4PCS)… 4PCS - LeoForward Australia","id":24631391715483,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/6119vV_MeDS.jpg?v=1632414332"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/6119vV_MeDS.jpg?v=1632414332","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B (4PCS)…\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eWhat is the HC-SR04 Ultrasonic Sensor? HC-SR04 Ultrasonic\nSensor is a device that can measure the distance to an object by using sound\nwaves. It measures distance by sending out a sound wave at a specific\nfrequency and listening for that sound wave to bounce back. By recording the\nelapsed time between the sound wave being generated and the sound wave\nbouncing back, it is possible to calculate the distance between the sonar\nsensor and the object. Read more Parameter details Power Supply +5V DC\nQuiescent Current 3mA Working Current \u0026lt; 5mA Effectual Angle \u0026lt;15° Ranging\nDistance 2cm - 300 cm\/1″ - 10ft Accuracy 0.3 cm Measuring Angle 30 degree\nTrigger Input Pulse width 10uS Dimensions 45mm x 20mm x 15mm What project can\nUltrasonic Sensor be applied for? Ultrasonic Sensor HC-SR04 is great for all\nkinds of projects that need distance measurements, avoiding obstacles as\nexamples. HC-SR04 provides a 2cm-400cm non-contact measurement function, the\nranging accuracy can reach 3mm. The modules include ultrasonic transmitters,\nreceivers, and control circuits. Read more Operatiing Principle of Ultrasonic\nSensor As the name indicates, ultrasonic sensors measure distance by using\nultrasonic waves. The sensor head emits an ultrasonic wave and receives the\nwave reflected back from the target. Ultrasonic Sensors measure the distance\nto the target by measuring the time between the emission and reception. The\ndistance can be calculated with the following formula: Distance L = 1\/2 × T ×\nC where L is the distance, T is the time between the emission and reception,\nand C is the sonic speed. (The value is multiplied by 1\/2 because T is the\ntime for the go-and-return distance.) Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUltrasonic module distance measuring transducer sensor.\u003c\/li\u003e\n \u003cli\u003eHC-SR04 consists of ultrasonic transmitter, receiver, and control circuit. When trigged it sends out a series of 40KHz ultrasonic pulses and receives echo from an object.\u003c\/li\u003e\n \u003cli\u003ePower Supply: DC 5V, Quiescent Current: less than 2mA; effectual angle: less than 15; distance: 2cm-500cm.\u003c\/li\u003e\n \u003cli\u003eCompatible with DIY Robot Car\/Raspberry Pi 4B, 3B+, 3B\u003c\/li\u003e\n \u003cli\u003ePackage Content: 4Pcs HC-SR04.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
CUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car/Raspberry Pi 4B, 3B+, 3B (4PCS)… 4PCS
$98.00 AUD
CUQI Ultrasonic Module Distance Measuring Sensor Module Kit, Transmitter and Receiver Module Compatible with DIY Robot Car/Raspberry Pi 4B, 3B+, 3B (4PCS)… What is the HC-SR04 Ultrasonic Sensor? HC-SR04 Ultrasonic Sensor is a device that can measure the distance to an object by using sound waves. It measures distance by sending out a sound wave ...
Primeonly27 10x Anodized Aluminu...
$99.00 AUD
{"id":7017382314139,"title":"Primeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread Computer Cover Power Supply PCI Slots Hard Drives DIY Orange","handle":"primeonly27-10x-anodized-aluminum-computer-case-thumbscrews-6-32-thread-computer-cover-power-supply-pci-slots-hard-drives-diy-orange","description":"\u003ch3\u003ePrimeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread Computer Cover Power Supply PCI Slots Hard Drives DIY Orange\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePrimeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread\nComputer Cover Power Supply PCI Slots Hard Drives DIY Orange\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-25T13:58:34+10:00","created_at":"2021-08-25T13:58:34+10:00","vendor":"Primeonly27","type":"Computer Screws","tags":["cocoon"],"price":9900,"price_min":9900,"price_max":9900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40965308776603,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B08PDXPD25","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Primeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread Computer Cover Power Supply PCI Slots Hard Drives DIY Orange","public_title":null,"options":["Default Title"],"price":9900,"weight":34,"compare_at_price":null,"inventory_management":null,"barcode":"OCS10","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B08PDXPD25.jpg?v=1651379663","\/\/leoforward.com\/cdn\/shop\/products\/71D77JimL1L.jpg?v=1632412854","\/\/leoforward.com\/cdn\/shop\/products\/6102MFJXscL.jpg?v=1632412854"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B08PDXPD25.jpg?v=1651379663","options":["Title"],"media":[{"alt":"Primeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread Computer Cover Power Supply PCI Slots Hard Drives DIY Orange - LeoForward Australia","id":29661087236333,"position":1,"preview_image":{"aspect_ratio":1.305,"height":1532,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B08PDXPD25.jpg?v=1651379663"},"aspect_ratio":1.305,"height":1532,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B08PDXPD25.jpg?v=1651379663","width":2000},{"alt":"Primeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread Computer Cover Power Supply PCI Slots Hard Drives DIY Orange - LeoForward Australia","id":24614673449115,"position":2,"preview_image":{"aspect_ratio":1.381,"height":1448,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71D77JimL1L.jpg?v=1632412854"},"aspect_ratio":1.381,"height":1448,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71D77JimL1L.jpg?v=1632412854","width":2000},{"alt":"Primeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread Computer Cover Power Supply PCI Slots Hard Drives DIY Orange - LeoForward Australia","id":24614673481883,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1500,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/6102MFJXscL.jpg?v=1632412854"},"aspect_ratio":1.333,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/6102MFJXscL.jpg?v=1632412854","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePrimeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread Computer Cover Power Supply PCI Slots Hard Drives DIY Orange\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePrimeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread\nComputer Cover Power Supply PCI Slots Hard Drives DIY Orange\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
Primeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread Computer Cover Power Supply PCI Slots Hard Drives DIY Orange
$99.00 AUD
Primeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread Computer Cover Power Supply PCI Slots Hard Drives DIY Orange Primeonly27 10x Anodized Aluminum Computer Case Thumbscrews 6-32 Thread Computer Cover Power Supply PCI Slots Hard Drives DIY Orange Product Features
DORHEA ESP8266 Code Burner Firmw...
$162.00 AUD
{"id":7010465087643,"title":"DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver","handle":"dorhea-esp8266-code-burner-firmware-downloader-flash-download-tool-test-board-5pcs-esp-12e-esp12e-wifi-module-compatible-with-ardu-ino-wireless-transmission-serial-transceiver-receiver","description":"\u003ch3\u003eDORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePackage Included: 1 X ESP8266 Code Burner Firmware\nDownloader 5 X ESP-12E Module This ESP8266 code burner firmware downloader is\nsuitable for firmware burning test of modules such as\nESP-12S\/12F\/12E\/07S\/07.All IO ports have been exported and can be used as a\nminimum system development board or a small batch burning fixture. The board\nsupports firmware one-click download function and adds programming.Mode\nindicator (blue light) and serial communication indicator (green light). Read\nmore The Wi-Fi module enters the upgrade mode: GPIO0 is at a low level, then\nthe module is reset and powered on; the Wi-Fi module enters the normal working\nmode: GPIO0 is at a high level, and the module is reset and powered. The RXD\nof the Wi-Fi module is connected to the TXD of the external MCU, and the TXD\nof the Wi-Fi module is connected to the RXD of the external MCU. Notice: The\nmodule supply voltage is 3.3V DC and the current is 500mA or more. Wi-Fi\nmodule IO maximum output current is 12mA. Wi-Fi module NRST pin is active low;\nEN enable pin is active high. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eESP8266 ESP-12E WiFi serial module built-board PCB antenna, 4M bytes Flash; Wireless standards: 802.11 b \/ g \/ n; Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M).\u003c\/li\u003e\n \u003cli\u003eThe ESP8266 test board code burner flash downloader compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F. Micro USB interface, this module is very easy to program.\u003c\/li\u003e\n \u003cli\u003eESP8266 code burner firmware downloader all IO ports have been drawn out and can be used as ZUI small system development board or small batch burning fixture. The board supports one-click firmware download function, and add burning.\u003c\/li\u003e\n \u003cli\u003eEasy to use: ESP8266-12E is a combined products,it's very convenient to operate(Need to solder 3V regulator by youself ).\u003c\/li\u003e\n \u003cli\u003eESP8266-12E is an enhanced version ESP8266-12, improving the external circuit, enhanced impedance signal output is better, whether it is stable or anti-jamming capability , have been greatly improved.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-22T23:55:39+10:00","created_at":"2021-08-22T23:55:39+10:00","vendor":"DORHEA","type":"Single Board Computers","tags":["cocoon"],"price":16200,"price_min":16200,"price_max":16200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40931280158875,"title":"ESP12E","option1":"ESP12E","option2":null,"option3":null,"sku":"B08P37JQYX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver - ESP12E","public_title":"ESP12E","options":["ESP12E"],"price":16200,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B08P37JQYX.jpg?v=1651370466","\/\/leoforward.com\/cdn\/shop\/products\/71g5rHsLYTL.jpg?v=1629995949","\/\/leoforward.com\/cdn\/shop\/products\/71-aua7AAyL.jpg?v=1629995949","\/\/leoforward.com\/cdn\/shop\/products\/71u9y5AftLL.jpg?v=1629995949","\/\/leoforward.com\/cdn\/shop\/products\/71VtzBeDidL.jpg?v=1629995950","\/\/leoforward.com\/cdn\/shop\/products\/714utX4kYcL.jpg?v=1629995950"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B08P37JQYX.jpg?v=1651370466","options":["Capacity"],"media":[{"alt":"DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver - LeoForward Australia","id":29660787704045,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B08P37JQYX.jpg?v=1651370466"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B08P37JQYX.jpg?v=1651370466","width":1601},{"alt":"DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver - LeoForward Australia","id":24579509977243,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71g5rHsLYTL.jpg?v=1629995949"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71g5rHsLYTL.jpg?v=1629995949","width":1601},{"alt":"DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver - LeoForward Australia","id":24579510010011,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71-aua7AAyL.jpg?v=1629995949"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71-aua7AAyL.jpg?v=1629995949","width":1601},{"alt":"DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver - LeoForward Australia","id":24579510042779,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71u9y5AftLL.jpg?v=1629995949"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71u9y5AftLL.jpg?v=1629995949","width":1601},{"alt":"DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver - LeoForward Australia","id":24579510075547,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71VtzBeDidL.jpg?v=1629995950"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71VtzBeDidL.jpg?v=1629995950","width":1601},{"alt":"DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver - LeoForward Australia","id":24579510108315,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/714utX4kYcL.jpg?v=1629995950"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/714utX4kYcL.jpg?v=1629995950","width":1601}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePackage Included: 1 X ESP8266 Code Burner Firmware\nDownloader 5 X ESP-12E Module This ESP8266 code burner firmware downloader is\nsuitable for firmware burning test of modules such as\nESP-12S\/12F\/12E\/07S\/07.All IO ports have been exported and can be used as a\nminimum system development board or a small batch burning fixture. The board\nsupports firmware one-click download function and adds programming.Mode\nindicator (blue light) and serial communication indicator (green light). Read\nmore The Wi-Fi module enters the upgrade mode: GPIO0 is at a low level, then\nthe module is reset and powered on; the Wi-Fi module enters the normal working\nmode: GPIO0 is at a high level, and the module is reset and powered. The RXD\nof the Wi-Fi module is connected to the TXD of the external MCU, and the TXD\nof the Wi-Fi module is connected to the RXD of the external MCU. Notice: The\nmodule supply voltage is 3.3V DC and the current is 500mA or more. Wi-Fi\nmodule IO maximum output current is 12mA. Wi-Fi module NRST pin is active low;\nEN enable pin is active high. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eESP8266 ESP-12E WiFi serial module built-board PCB antenna, 4M bytes Flash; Wireless standards: 802.11 b \/ g \/ n; Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M).\u003c\/li\u003e\n \u003cli\u003eThe ESP8266 test board code burner flash downloader compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F. Micro USB interface, this module is very easy to program.\u003c\/li\u003e\n \u003cli\u003eESP8266 code burner firmware downloader all IO ports have been drawn out and can be used as ZUI small system development board or small batch burning fixture. The board supports one-click firmware download function, and add burning.\u003c\/li\u003e\n \u003cli\u003eEasy to use: ESP8266-12E is a combined products,it's very convenient to operate(Need to solder 3V regulator by youself ).\u003c\/li\u003e\n \u003cli\u003eESP8266-12E is an enhanced version ESP8266-12, improving the external circuit, enhanced impedance signal output is better, whether it is stable or anti-jamming capability , have been greatly improved.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver
$162.00 AUD
DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module Compatible with Ardu-ino, Wireless Transmission Serial Transceiver Receiver Package Included: 1 X ESP8266 Code Burner Firmware Downloader 5 X ESP-12E Module This ESP8266 code burner firmware downloader is suitable for firmware burning ...
DORHEA ESP8266 DHT22 Temperature...
$139.00 AUD
{"id":7010463219867,"title":"DORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module 5PCS","handle":"dorhea-esp8266-dht22-temperature-and-humidity-motion-ir-pyroelectric-infrared-sensor-module-kit-wifi-development-board-dht22-temperature-humidity-sensor-ir-infrared-human-sensor-module-5pcs","description":"\u003ch3\u003eDORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor:5PCS\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eESP8266 CP2102 NodeMCU LUA ESP-12E WIFI serial wireless module, built-in Micro-USB, with flash and reset switches, easy to program. Full I\/O port and Wireless 802.11 supported, direct download no need to reset.\u003c\/li\u003e\n \u003cli\u003eSingle-bus digital signal output, bidirectional serial data, digital output.can build thermometer electric circuit microcontroller, it can be used for robotics development kit, suit for engineer to make projects. Used for automatic control, weather stations, home appliances, humidity regulators, medical treatment, dehumidifiers, etc.\u003c\/li\u003e\n \u003cli\u003eThe IR human sensor module working voltage: DC 2.7-12V; Static power consumption: \u0026lt;0.1mA;Sensing range: 100 degree cone angle, 3-5 m; (required depending on the lens) Working temperature: -20 to + 60 C.\u003c\/li\u003e\n \u003cli\u003eIR Pyroelectric Infrared sensor module based on passive body infrared technology digital intelligent automatic control products, high sensitivity, reliability, widely used in various types of automatic induction electrical equipment.\u003c\/li\u003e\n \u003cli\u003ePIR motion sensor detector module after the induction output is high, in the delay period, if the body in its induction range of activities, the output will remain high until the delay after the person to become Low level. (Ie, the sensing module automatically detects a delay period after each activity of the human body, and takes the last active time as the starting point for the delay time).\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-22T23:54:05+10:00","created_at":"2021-08-22T23:54:05+10:00","vendor":"DORHEA","type":"Single Board Computers","tags":["cocoon"],"price":13900,"price_min":13900,"price_max":13900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40931275571355,"title":"5PCS","option1":"5PCS","option2":null,"option3":null,"sku":"B08X1JX8XX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module 5PCS - 5PCS","public_title":"5PCS","options":["5PCS"],"price":13900,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B08X1JX8XX.jpg?v=1651370329","\/\/leoforward.com\/cdn\/shop\/products\/71lN0lr7EEL.jpg?v=1629995929","\/\/leoforward.com\/cdn\/shop\/products\/81jU_WsK4OL.jpg?v=1629995929","\/\/leoforward.com\/cdn\/shop\/products\/61bU61FLShL.jpg?v=1629995930","\/\/leoforward.com\/cdn\/shop\/products\/615WBCz07iL.jpg?v=1629995930","\/\/leoforward.com\/cdn\/shop\/products\/61XBr5cUO0L.jpg?v=1629995930"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B08X1JX8XX.jpg?v=1651370329","options":["Color"],"media":[{"alt":"DORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module 5PCS - LeoForward Australia","id":29660780232941,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B08X1JX8XX.jpg?v=1651370329"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B08X1JX8XX.jpg?v=1651370329","width":1601},{"alt":"DORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module 5PCS - LeoForward Australia","id":24579501195419,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71lN0lr7EEL.jpg?v=1629995929"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71lN0lr7EEL.jpg?v=1629995929","width":1601},{"alt":"DORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module 5PCS - LeoForward Australia","id":24579501228187,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81jU_WsK4OL.jpg?v=1629995929"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81jU_WsK4OL.jpg?v=1629995929","width":1601},{"alt":"DORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module 5PCS - LeoForward Australia","id":24579501260955,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61bU61FLShL.jpg?v=1629995930"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61bU61FLShL.jpg?v=1629995930","width":1601},{"alt":"DORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module 5PCS - LeoForward Australia","id":24579501293723,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/615WBCz07iL.jpg?v=1629995930"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/615WBCz07iL.jpg?v=1629995930","width":1601},{"alt":"DORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module 5PCS - LeoForward Australia","id":24579501326491,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61XBr5cUO0L.jpg?v=1629995930"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61XBr5cUO0L.jpg?v=1629995930","width":1601}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor:5PCS\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eESP8266 CP2102 NodeMCU LUA ESP-12E WIFI serial wireless module, built-in Micro-USB, with flash and reset switches, easy to program. Full I\/O port and Wireless 802.11 supported, direct download no need to reset.\u003c\/li\u003e\n \u003cli\u003eSingle-bus digital signal output, bidirectional serial data, digital output.can build thermometer electric circuit microcontroller, it can be used for robotics development kit, suit for engineer to make projects. Used for automatic control, weather stations, home appliances, humidity regulators, medical treatment, dehumidifiers, etc.\u003c\/li\u003e\n \u003cli\u003eThe IR human sensor module working voltage: DC 2.7-12V; Static power consumption: \u0026lt;0.1mA;Sensing range: 100 degree cone angle, 3-5 m; (required depending on the lens) Working temperature: -20 to + 60 C.\u003c\/li\u003e\n \u003cli\u003eIR Pyroelectric Infrared sensor module based on passive body infrared technology digital intelligent automatic control products, high sensitivity, reliability, widely used in various types of automatic induction electrical equipment.\u003c\/li\u003e\n \u003cli\u003ePIR motion sensor detector module after the induction output is high, in the delay period, if the body in its induction range of activities, the output will remain high until the delay after the person to become Low level. (Ie, the sensing module automatically detects a delay period after each activity of the human body, and takes the last active time as the starting point for the delay time).\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
DORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module 5PCS
$139.00 AUD
DORHEA ESP8266 DHT22 Temperature and Humidity Motion IR Pyroelectric Infrared Sensor Module Kit, WiFi Development Board + DHT22 Temperature Humidity Sensor + IR Infrared Human Sensor Module Color:5PCS Product Features ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI serial wireless module, built-in Micro-USB, with flash and reset switches, ...
Hahiyo Anodized Aluminum Thumbsc...
$107.00 AUD
{"id":7010458665115,"title":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs 6#-32-Blue-10Pieces","handle":"hahiyo-anodized-aluminum-thumbscrews-6-32-thread-size-large-knurled-head-cage-mounts-hand-tighten-easy-to-grip-and-turn-not-damage-inside-sturdy-for-computer-case-pci-slot-motherboard-blue-10pcs-6-32-blue-10pieces","description":"\u003ch3\u003eHahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:6-32-Blue-10Pieces Material:Aluminum Color:Blue Quantity:10pieces\nSize:Thread size:6-32 The large knurled head thumbscrews are light and have a\ngood grip,longer thread allows for attaching computer case sides.No tools need\nto remove the ideal computer case panel.The bright color is done by\ncoating,not by paint,so it is anti-scratch.Widely applicable to most computer\ncases,PCI slots or motherboard installation.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOperate smoothly.Large knurled head is easy to grip and turn,longer thread allows for attaching computer case sides.It makes it easy to open\/close the case.The threads can easily cross thread.Will not damage the case finish and short inside.\u003c\/li\u003e\n \u003cli\u003eDurable.The head is flat on these so you had better not use a screwdriver to tighten or remove.From finding a screwdriver and then carefully removing the screws without scratching the nickel plate or stainless finish.\u003c\/li\u003e\n \u003cli\u003eThe bright color is done by coating,not by paint,so it is very sturdy,anti-scratch.Hold up for a long time.Perfect for lightsaber blade screws while adding some bling to the hilt at the same time.\u003c\/li\u003e\n \u003cli\u003eFunctional.The thumbscrews easily screwed into the motherboard standoffs.You can open PC case quickly without tools.Use these to hold the glass side panel for a mid tower PC case and expansion slots.They work great as replacements for regular PC case screws.Much more convenient for using in computers where you will be opening the case for regular cleaning or upgrades.\u003c\/li\u003e\n \u003cli\u003eSolid.Use high-quality aluminum material,anti-stripping,screw groove on the top,good weight,the thumbscrew design allows easy.High hardness,high strength,not easy to break.The surface is anodized to prevent rust and corrosion.Manual elastic design,convenient for manual operation.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-22T23:50:15+10:00","created_at":"2021-08-22T23:50:15+10:00","vendor":"Hahiyo","type":"Computer Screws","tags":["cocoon"],"price":10700,"price_min":10700,"price_max":10700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40931264004251,"title":"6#-32-Blue-10Pieces","option1":"6#-32-Blue-10Pieces","option2":null,"option3":null,"sku":"B091HN7CD6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs 6#-32-Blue-10Pieces - 6#-32-Blue-10Pieces","public_title":"6#-32-Blue-10Pieces","options":["6#-32-Blue-10Pieces"],"price":10700,"weight":27,"compare_at_price":null,"inventory_management":null,"barcode":"802405451544","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B091HN7CD6.jpg?v=1651369944","\/\/leoforward.com\/cdn\/shop\/products\/51hpvPAulzS.jpg?v=1629995869","\/\/leoforward.com\/cdn\/shop\/products\/41pxdHF4YSS.jpg?v=1629995870","\/\/leoforward.com\/cdn\/shop\/products\/51693N2nIyS.jpg?v=1629995870","\/\/leoforward.com\/cdn\/shop\/products\/51-w1-cpqwS.jpg?v=1629995870","\/\/leoforward.com\/cdn\/shop\/products\/61TVTvt87HS.jpg?v=1629995870","\/\/leoforward.com\/cdn\/shop\/products\/611GTtxR_XS.jpg?v=1629995870"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B091HN7CD6.jpg?v=1651369944","options":["Size"],"media":[{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs 6#-32-Blue-10Pieces - LeoForward Australia","id":29660761456877,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B091HN7CD6.jpg?v=1651369944"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B091HN7CD6.jpg?v=1651369944","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs 6#-32-Blue-10Pieces - LeoForward Australia","id":24579475570843,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51hpvPAulzS.jpg?v=1629995869"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51hpvPAulzS.jpg?v=1629995869","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs 6#-32-Blue-10Pieces - LeoForward Australia","id":24579475603611,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/41pxdHF4YSS.jpg?v=1629995870"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/41pxdHF4YSS.jpg?v=1629995870","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs 6#-32-Blue-10Pieces - LeoForward Australia","id":24579475636379,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51693N2nIyS.jpg?v=1629995870"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51693N2nIyS.jpg?v=1629995870","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs 6#-32-Blue-10Pieces - LeoForward Australia","id":24579475669147,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51-w1-cpqwS.jpg?v=1629995870"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51-w1-cpqwS.jpg?v=1629995870","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs 6#-32-Blue-10Pieces - LeoForward Australia","id":24579475701915,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61TVTvt87HS.jpg?v=1629995870"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61TVTvt87HS.jpg?v=1629995870","width":1000},{"alt":"Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs 6#-32-Blue-10Pieces - LeoForward Australia","id":24579475734683,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/611GTtxR_XS.jpg?v=1629995870"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/611GTtxR_XS.jpg?v=1629995870","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eHahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:6-32-Blue-10Pieces Material:Aluminum Color:Blue Quantity:10pieces\nSize:Thread size:6-32 The large knurled head thumbscrews are light and have a\ngood grip,longer thread allows for attaching computer case sides.No tools need\nto remove the ideal computer case panel.The bright color is done by\ncoating,not by paint,so it is anti-scratch.Widely applicable to most computer\ncases,PCI slots or motherboard installation.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOperate smoothly.Large knurled head is easy to grip and turn,longer thread allows for attaching computer case sides.It makes it easy to open\/close the case.The threads can easily cross thread.Will not damage the case finish and short inside.\u003c\/li\u003e\n \u003cli\u003eDurable.The head is flat on these so you had better not use a screwdriver to tighten or remove.From finding a screwdriver and then carefully removing the screws without scratching the nickel plate or stainless finish.\u003c\/li\u003e\n \u003cli\u003eThe bright color is done by coating,not by paint,so it is very sturdy,anti-scratch.Hold up for a long time.Perfect for lightsaber blade screws while adding some bling to the hilt at the same time.\u003c\/li\u003e\n \u003cli\u003eFunctional.The thumbscrews easily screwed into the motherboard standoffs.You can open PC case quickly without tools.Use these to hold the glass side panel for a mid tower PC case and expansion slots.They work great as replacements for regular PC case screws.Much more convenient for using in computers where you will be opening the case for regular cleaning or upgrades.\u003c\/li\u003e\n \u003cli\u003eSolid.Use high-quality aluminum material,anti-stripping,screw groove on the top,good weight,the thumbscrew design allows easy.High hardness,high strength,not easy to break.The surface is anodized to prevent rust and corrosion.Manual elastic design,convenient for manual operation.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs 6#-32-Blue-10Pieces
$107.00 AUD
Hahiyo Anodized Aluminum Thumbscrews 6#-32 Thread Size Large Knurled Head Cage Mounts Hand Tighten Easy to Grip and Turn Not Damage Inside Sturdy for Computer Case PCI Slot Motherboard Blue 10pcs Size:6-32-Blue-10Pieces Material:Aluminum Color:Blue Quantity:10pieces Size:Thread size:6-32 The large knurled head thumbscrews are light and have a go...
NOYITO Motherboard Extension Wir...
$108.00 AUD
{"id":7001563627675,"title":"NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) 0.3m","handle":"noyito-motherboard-extension-wire-set-22awg-silver-plated-wire-gold-plated-plug-power-sw-power-led-hdd-led-reset-sw-four-kinds-extension-wire-for-pc-diy-0-3m-black-0-3m","description":"\u003ch3\u003eNOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:0.3m | Color:Black Product Name: Motherboard extension wire set;\nMaterial: Silver plated wire; Specifications: 22AWG; Plug: Gold plated; Wire\nlength : 0.3m \/ 0.4m \/ 0.5m; Wire color: Silver \/ Red \/ Black ; NOTE: This\nseries of products has a variety of color and size suits. Please select your\ndesired product specification before purchasing. Package Included:\n1xMotherboard Extension Wire Set\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMotherboard extension kit includes four interface extensions: POWER SW, RESET SW, HDD LED, and POWER LED.\u003c\/li\u003e\n \u003cli\u003eSilver plated wire. It has the advantages of high temperature resistance, good flame resistance, excellent electrical properties, and perfect mechanical and chemical properties.\u003c\/li\u003e\n \u003cli\u003eGold plated plugs. Excellent oxidation resistance and conductivity.\u003c\/li\u003e\n \u003cli\u003eWe make high quality, high security wire. Reject inferior products. If you have any need for help in use, you can contact us.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-19T16:47:24+10:00","created_at":"2021-08-19T16:47:24+10:00","vendor":"NOYITO","type":"Internal Components","tags":["cocoon"],"price":10800,"price_min":10800,"price_max":10800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40891847540891,"title":"Black \/ 0.3m","option1":"Black","option2":"0.3m","option3":null,"sku":"B07BVS3FX7","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) 0.3m - Black \/ 0.3m","public_title":"Black \/ 0.3m","options":["Black","0.3m"],"price":10800,"weight":20,"compare_at_price":null,"inventory_management":null,"barcode":"667797748784","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B07BVS3FX7.jpg?v=1651356352","\/\/leoforward.com\/cdn\/shop\/products\/718XRMZBtrL.jpg?v=1629395449","\/\/leoforward.com\/cdn\/shop\/products\/71BNlbajORL.jpg?v=1629395449","\/\/leoforward.com\/cdn\/shop\/products\/718zmuebugL.jpg?v=1629395450","\/\/leoforward.com\/cdn\/shop\/products\/713QmhA70fL.jpg?v=1629395450","\/\/leoforward.com\/cdn\/shop\/products\/7123SAMLkbL.jpg?v=1629395450","\/\/leoforward.com\/cdn\/shop\/products\/718-S4rT3mL.jpg?v=1629395451"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B07BVS3FX7.jpg?v=1651356352","options":["Color","Size"],"media":[{"alt":"NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) 0.3m - LeoForward Australia","id":29660164489453,"position":1,"preview_image":{"aspect_ratio":1.501,"height":1706,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B07BVS3FX7.jpg?v=1651356352"},"aspect_ratio":1.501,"height":1706,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B07BVS3FX7.jpg?v=1651356352","width":2560},{"alt":"NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) 0.3m - LeoForward Australia","id":24529570594971,"position":2,"preview_image":{"aspect_ratio":1.501,"height":1706,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/718XRMZBtrL.jpg?v=1629395449"},"aspect_ratio":1.501,"height":1706,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/718XRMZBtrL.jpg?v=1629395449","width":2560},{"alt":"NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) 0.3m - LeoForward Australia","id":24529570627739,"position":3,"preview_image":{"aspect_ratio":1.501,"height":1706,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71BNlbajORL.jpg?v=1629395449"},"aspect_ratio":1.501,"height":1706,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71BNlbajORL.jpg?v=1629395449","width":2560},{"alt":"NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) 0.3m - LeoForward Australia","id":24529570660507,"position":4,"preview_image":{"aspect_ratio":1.501,"height":1706,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/718zmuebugL.jpg?v=1629395450"},"aspect_ratio":1.501,"height":1706,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/718zmuebugL.jpg?v=1629395450","width":2560},{"alt":"NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) 0.3m - LeoForward Australia","id":24529570693275,"position":5,"preview_image":{"aspect_ratio":1.5,"height":1707,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/713QmhA70fL.jpg?v=1629395450"},"aspect_ratio":1.5,"height":1707,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/713QmhA70fL.jpg?v=1629395450","width":2560},{"alt":"NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) 0.3m - LeoForward Australia","id":24529570726043,"position":6,"preview_image":{"aspect_ratio":1.5,"height":1707,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/7123SAMLkbL.jpg?v=1629395450"},"aspect_ratio":1.5,"height":1707,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/7123SAMLkbL.jpg?v=1629395450","width":2560},{"alt":"NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) 0.3m - LeoForward Australia","id":24529570758811,"position":7,"preview_image":{"aspect_ratio":1.501,"height":1706,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/718-S4rT3mL.jpg?v=1629395451"},"aspect_ratio":1.501,"height":1706,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/718-S4rT3mL.jpg?v=1629395451","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eNOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:0.3m | Color:Black Product Name: Motherboard extension wire set;\nMaterial: Silver plated wire; Specifications: 22AWG; Plug: Gold plated; Wire\nlength : 0.3m \/ 0.4m \/ 0.5m; Wire color: Silver \/ Red \/ Black ; NOTE: This\nseries of products has a variety of color and size suits. Please select your\ndesired product specification before purchasing. Package Included:\n1xMotherboard Extension Wire Set\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMotherboard extension kit includes four interface extensions: POWER SW, RESET SW, HDD LED, and POWER LED.\u003c\/li\u003e\n \u003cli\u003eSilver plated wire. It has the advantages of high temperature resistance, good flame resistance, excellent electrical properties, and perfect mechanical and chemical properties.\u003c\/li\u003e\n \u003cli\u003eGold plated plugs. Excellent oxidation resistance and conductivity.\u003c\/li\u003e\n \u003cli\u003eWe make high quality, high security wire. Reject inferior products. If you have any need for help in use, you can contact us.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) 0.3m
$108.00 AUD
NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.3m, Black) Size:0.3m | Color:Black Product Name: Motherboard extension wire set; Material: Silver plated wire; Specifications: 22AWG; Plug: Gold plated; Wire length : 0.3m / 0.4m / 0.5m; W...
