{"id":7026629443739,"title":"HiLetgo Stackable SD Card TF Card Micro SD Card SD\/SDHC\/Micro SD\/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560","handle":"hiletgo-stackable-sd-card-tf-card-micro-sd-card-sd-sdhc-micro-sd-micro-sdhc-card-reader-shield-multi-functional-sd-card-shield-module-for-arduino-uno-r3-mega2560","description":"\u003ch3\u003eHiLetgo Stackable SD Card TF Card Micro SD Card SD\/SDHC\/Micro SD\/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eFeatures: Compatible SD card, Micro SD card and SDHC card\nsupportable.Prototype expand Library support Size: 53mm x 47mm Weight: 35g Pin\nWith SD Card 5V VCC ---3v3 GND--GND D13---SD_CLK D12-- SD_OUT D11---SD_IN D10\n--SD_CS 1.The shield is missing pins for SCL and SDA If you need those two for\nI2C communication like a display shield, you have to use Analog pin 4 and\nAnalog pin 52. How to build an eeprom programmer to program 2708s for\ncomputer?A: Set the switch to \"3.3\"and pressed on, SD cards require 3.3v or\nyou could damage them.B:Installed the shield on a Mega 2560 R3 if you need lot\nof I\/O pins forprom programmer,You can plug any shield, in general, into any\nArduino as long as you \"match\" up the pins which are marked.C: Installed the\nshield on Mega,put the shield on the Duemilanove, changed the chip select pin\nto \"10\" again, and Cardinfo ran. Note that when you compile using the IDE, you\nhave to CHANGE the target board to the board you are using or it just won't\nwork.D:when you modify the code, make sure that you replace \"10\" with \"53\".\n3.You can by googling \"\"SD shield 3.0\"\" and clicking on the iTEAD wiki link.\nA-Put the SD shield on whatever arduino you have. Using the labels on the\nshield and arduino, make sure the pins match.B-Use the wiki instructions'\n\"Compatibility\" section to find out what position the 3.3V\/5V selector switch\nshould be in, and whether you need to remove ALL 3 of the adjacent SPI Jumpers\non the top of the board given the arduino board you're using. For the arduino\nDUE,you can remove these jumpers and keep the switch on 3.3V.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis SD card shield is a standard SD card \/ TF card break out board for Arduino. The SD card shield adds storage to your Arduino project.\u003c\/li\u003e\n \u003cli\u003eStackable SD Card Shield is a stackable design SD \/ TF card expansion board. It supports direct insertion in the Arduino board to extend SD \/ TF read and write functions.\u003c\/li\u003e\n \u003cli\u003eSD \/ TF card expansion board uses the hardware ISP interface, so only supports SIP mode SD \/ TF card.\u003c\/li\u003e\n \u003cli\u003eThis expansion board uses only a handful of pins, so the stack design allows you to plug in another expansion board on this board, provided that the same SPI pins are not used, such as Bluetooth expansion board, GPRS expansion board.\u003c\/li\u003e\n \u003cli\u003eMany electronic enthusiasts have provided a simple documentation program for Arduino. And we provide a simple TinyFAT file system library, you can easily achieve control SD \/ TF card reader - this library only supports FAT16 small capacity card, such as 1G card, if you need to support FAT32, you can use Official library for Arduino.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-28T18:13:14+10:00","created_at":"2021-08-28T18:13:14+10:00","vendor":"HiLetgo","type":"Memory Card Readers","tags":["cocoon"],"price":10600,"price_min":10600,"price_max":10600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40992134070427,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B006LRR0IQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HiLetgo Stackable SD Card TF Card Micro SD Card SD\/SDHC\/Micro SD\/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560","public_title":null,"options":["Default Title"],"price":10600,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"610708262626","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B006LRR0IQ.jpg?v=1651400764","\/\/leoforward.com\/cdn\/shop\/products\/61InFO2qdiL.jpg?v=1634833265","\/\/leoforward.com\/cdn\/shop\/products\/61fctKhUjGL.jpg?v=1634833266","\/\/leoforward.com\/cdn\/shop\/products\/61tj2Kfmf8L.jpg?v=1634833266","\/\/leoforward.com\/cdn\/shop\/products\/51_Du5sRIiL_9263a627-d89b-4294-a44c-fbde9228a54b.jpg?v=1634833266"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B006LRR0IQ.jpg?v=1651400764","options":["Title"],"media":[{"alt":"HiLetgo Stackable SD Card TF Card Micro SD Card SD\/SDHC\/Micro SD\/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560 - LeoForward Australia","id":29661510303981,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B006LRR0IQ.jpg?v=1651400764"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B006LRR0IQ.jpg?v=1651400764","width":1200},{"alt":"HiLetgo Stackable SD Card TF Card Micro SD Card SD\/SDHC\/Micro SD\/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560 - LeoForward Australia","id":24660982562971,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61InFO2qdiL.jpg?v=1634833265"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61InFO2qdiL.jpg?v=1634833265","width":1200},{"alt":"HiLetgo Stackable SD Card TF Card Micro SD Card SD\/SDHC\/Micro SD\/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560 - LeoForward Australia","id":24660982595739,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61fctKhUjGL.jpg?v=1634833266"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61fctKhUjGL.jpg?v=1634833266","width":1200},{"alt":"HiLetgo Stackable SD Card TF Card Micro SD Card SD\/SDHC\/Micro SD\/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560 - LeoForward Australia","id":24660982628507,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61tj2Kfmf8L.jpg?v=1634833266"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61tj2Kfmf8L.jpg?v=1634833266","width":1200},{"alt":"HiLetgo Stackable SD Card TF Card Micro SD Card SD\/SDHC\/Micro SD\/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560 - LeoForward Australia","id":24660982661275,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51_Du5sRIiL_9263a627-d89b-4294-a44c-fbde9228a54b.jpg?v=1634833266"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51_Du5sRIiL_9263a627-d89b-4294-a44c-fbde9228a54b.jpg?v=1634833266","width":1100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eHiLetgo Stackable SD Card TF Card Micro SD Card SD\/SDHC\/Micro SD\/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eFeatures: Compatible SD card, Micro SD card and SDHC card\nsupportable.Prototype expand Library support Size: 53mm x 47mm Weight: 35g Pin\nWith SD Card 5V VCC ---3v3 GND--GND D13---SD_CLK D12-- SD_OUT D11---SD_IN D10\n--SD_CS 1.The shield is missing pins for SCL and SDA If you need those two for\nI2C communication like a display shield, you have to use Analog pin 4 and\nAnalog pin 52. How to build an eeprom programmer to program 2708s for\ncomputer?A: Set the switch to \"3.3\"and pressed on, SD cards require 3.3v or\nyou could damage them.B:Installed the shield on a Mega 2560 R3 if you need lot\nof I\/O pins forprom programmer,You can plug any shield, in general, into any\nArduino as long as you \"match\" up the pins which are marked.C: Installed the\nshield on Mega,put the shield on the Duemilanove, changed the chip select pin\nto \"10\" again, and Cardinfo ran. Note that when you compile using the IDE, you\nhave to CHANGE the target board to the board you are using or it just won't\nwork.D:when you modify the code, make sure that you replace \"10\" with \"53\".\n3.You can by googling \"\"SD shield 3.0\"\" and clicking on the iTEAD wiki link.\nA-Put the SD shield on whatever arduino you have. Using the labels on the\nshield and arduino, make sure the pins match.B-Use the wiki instructions'\n\"Compatibility\" section to find out what position the 3.3V\/5V selector switch\nshould be in, and whether you need to remove ALL 3 of the adjacent SPI Jumpers\non the top of the board given the arduino board you're using. For the arduino\nDUE,you can remove these jumpers and keep the switch on 3.3V.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis SD card shield is a standard SD card \/ TF card break out board for Arduino. The SD card shield adds storage to your Arduino project.\u003c\/li\u003e\n \u003cli\u003eStackable SD Card Shield is a stackable design SD \/ TF card expansion board. It supports direct insertion in the Arduino board to extend SD \/ TF read and write functions.\u003c\/li\u003e\n \u003cli\u003eSD \/ TF card expansion board uses the hardware ISP interface, so only supports SIP mode SD \/ TF card.\u003c\/li\u003e\n \u003cli\u003eThis expansion board uses only a handful of pins, so the stack design allows you to plug in another expansion board on this board, provided that the same SPI pins are not used, such as Bluetooth expansion board, GPRS expansion board.\u003c\/li\u003e\n \u003cli\u003eMany electronic enthusiasts have provided a simple documentation program for Arduino. And we provide a simple TinyFAT file system library, you can easily achieve control SD \/ TF card reader - this library only supports FAT16 small capacity card, such as 1G card, if you need to support FAT32, you can use Official library for Arduino.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
HiLetgo Stackable SD Card TF Card Micro SD Card SD/SDHC/Micro SD/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560
HiLetgo Stackable SD Card TF Card Micro SD Card SD/SDHC/Micro SD/Micro SDHC Card Reader Shield Multi-Functional SD Card Shield Module for Arduino UNO R3 MEGA2560
Features: Compatible SD card, Micro SD card and SDHC card supportable.Prototype expand Library support Size: 53mm x 47mm Weight: 35g Pin With SD Card 5V VCC ---3v3 GND--GND D13---SD_CLK D12-- SD_OUT D11---SD_IN D10 --SD_CS 1.The shield is missing pins for SCL and SDA If you need those two for I2C communication like a display shield, you have to use Analog pin 4 and Analog pin 52. How to build an eeprom programmer to program 2708s for computer?A: Set the switch to "3.3"and pressed on, SD cards require 3.3v or you could damage them.B:Installed the shield on a Mega 2560 R3 if you need lot of I/O pins forprom programmer,You can plug any shield, in general, into any Arduino as long as you "match" up the pins which are marked.C: Installed the shield on Mega,put the shield on the Duemilanove, changed the chip select pin to "10" again, and Cardinfo ran. Note that when you compile using the IDE, you have to CHANGE the target board to the board you are using or it just won't work.D:when you modify the code, make sure that you replace "10" with "53". 3.You can by googling ""SD shield 3.0"" and clicking on the iTEAD wiki link. A-Put the SD shield on whatever arduino you have. Using the labels on the shield and arduino, make sure the pins match.B-Use the wiki instructions' "Compatibility" section to find out what position the 3.3V/5V selector switch should be in, and whether you need to remove ALL 3 of the adjacent SPI Jumpers on the top of the board given the arduino board you're using. For the arduino DUE,you can remove these jumpers and keep the switch on 3.3V.
Product Features
- This SD card shield is a standard SD card / TF card break out board for Arduino. The SD card shield adds storage to your Arduino project.
- Stackable SD Card Shield is a stackable design SD / TF card expansion board. It supports direct insertion in the Arduino board to extend SD / TF read and write functions.
- SD / TF card expansion board uses the hardware ISP interface, so only supports SIP mode SD / TF card.
- This expansion board uses only a handful of pins, so the stack design allows you to plug in another expansion board on this board, provided that the same SPI pins are not used, such as Bluetooth expansion board, GPRS expansion board.
- Many electronic enthusiasts have provided a simple documentation program for Arduino. And we provide a simple TinyFAT file system library, you can easily achieve control SD / TF card reader - this library only supports FAT16 small capacity card, such as 1G card, if you need to support FAT32, you can use Official library for Arduino.
Related Products
BoneView SD Card Reader for Andr...
$145.00 AUD
{"id":7026561351835,"title":"BoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo \u0026 Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter","handle":"boneview-sd-card-reader-for-android-type-c-usb-trail-camera-viewer-play-deer-hunting-photo-video-from-all-game-cam-memory-on-any-smart-phone-samsung-moto-lg-free-microusb-otg-adapter","description":"\u003ch3\u003eBoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo \u0026amp; Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more \"BoneView Trail Camera Viewers - The Ultimate\nTool for Hunting and Scouting\" Our Latest Edition of the BoneView SD Card\nReader for Android has you covered for all your Trail Camera Viewing needs.\nThis new model will give you the fastest, most compatible connection to almost\nany Android cellphone or tablet on the market today. It now sports a high-\nspeed direct USB-C cord end; which is the new reversible connector now\nstandard on all Android phones. Not only that, but we include an OTG \"On The\nGo\" compatible Micro-USB adapter to ensure you can still connect to the past\nAndroid phone models that have the USB external storage hosting support very\ncommon in most popular phone brands past 2015. The best part is the latest\nstock Android software does not require you to download additional\napplications to get all the best features of trail camera management including\nthe ability to view hundreds or thousands of deer pictures in full-screen view\nwith the ability to easily swipe through right from the SD or MicroSD memory\nchips from any trail camera card of any size or class 4-GB or higher. No need\nto import all of the photos to your phone using up valuable storage space\nbefore you can view them. Leave the laptop or bulky photo viewer tablets at\nhome and take advantage of the super computer already in your pocket. This\nreally is the most plug and play model yet, and if for some reason it doesn't\nwork for you we will always have your back to keep our customers happy! At\nBoneView we take a lot of pride in doing our best to have the best performing\nTrail Camera Viewers for Smartphones. Ever since introducing this amazing\ntechnology to hunters in 2015 we have been hard at it in Minnesota and\nWisconsin continually testing this in the field all year-long to stay abreast\nof the ever-changing technology. You can be sure you are getting the best from\nus, and we will always be here for you to make sure our products meet your\nexpectations for a long time.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eNEW EDITION FOR ALL LATEST TYPE-C ANDROID PHONES - Designed specifically for hunters to instantly view, save, share and delete your trail camera pictures and videos with your smartphone or tablet\u003c\/li\u003e\n \u003cli\u003eREADS ALL TRAIL CAMERA SD AND MICRO-SD MEMORY CARDS from all major trail cameras on the market\u003c\/li\u003e\n \u003cli\u003eINSTANTLY PLUG AND PLAY - No Extra Apps Required and Still Able to Quickly Swipe Through and Save Thousands of Photos or Play Most Video Files with Super Fast Transfer Speeds\u003c\/li\u003e\n \u003cli\u003eUSE ANYWHERE IN THE WOODS - No Internet, Wi-Fi or Cell Service Required Ever, No Batteries Either\u003c\/li\u003e\n \u003cli\u003eBUY WITH CONFIDENCE - Bone View will always stand behind their products and make sure they work well for you no matter what\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-28T17:32:38+10:00","created_at":"2021-08-28T17:32:38+10:00","vendor":"BoneView","type":"Memory Card Readers","tags":["cocoon","sold"],"price":14500,"price_min":14500,"price_max":14500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40991756451995,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07QKFJ8N3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo \u0026 Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter","public_title":null,"options":["Default Title"],"price":14500,"weight":43,"compare_at_price":null,"inventory_management":null,"barcode":"787602865700","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B07QKFJ8N3.jpg?v=1651397259","\/\/leoforward.com\/cdn\/shop\/products\/71_0qr7t_2L.jpg?v=1634832781","\/\/leoforward.com\/cdn\/shop\/products\/71wwDeQze7L.jpg?v=1634832781","\/\/leoforward.com\/cdn\/shop\/products\/71j43497u5L.jpg?v=1634832782","\/\/leoforward.com\/cdn\/shop\/products\/71akaoSe_VL.jpg?v=1634832782"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B07QKFJ8N3.jpg?v=1651397259","options":["Title"],"media":[{"alt":"BoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo \u0026 Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter - LeoForward Australia","id":29661454958829,"position":1,"preview_image":{"aspect_ratio":1.001,"height":2498,"width":2500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B07QKFJ8N3.jpg?v=1651397259"},"aspect_ratio":1.001,"height":2498,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B07QKFJ8N3.jpg?v=1651397259","width":2500},{"alt":"BoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo \u0026 Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter - LeoForward Australia","id":24660578467995,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2381,"width":2381,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71_0qr7t_2L.jpg?v=1634832781"},"aspect_ratio":1.0,"height":2381,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71_0qr7t_2L.jpg?v=1634832781","width":2381},{"alt":"BoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo \u0026 Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter - LeoForward Australia","id":24660578500763,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71wwDeQze7L.jpg?v=1634832781"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71wwDeQze7L.jpg?v=1634832781","width":2560},{"alt":"BoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo \u0026 Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter - LeoForward Australia","id":24660578533531,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71j43497u5L.jpg?v=1634832782"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71j43497u5L.jpg?v=1634832782","width":2560},{"alt":"BoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo \u0026 Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter - LeoForward Australia","id":24660578566299,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71akaoSe_VL.jpg?v=1634832782"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71akaoSe_VL.jpg?v=1634832782","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo \u0026amp; Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more \"BoneView Trail Camera Viewers - The Ultimate\nTool for Hunting and Scouting\" Our Latest Edition of the BoneView SD Card\nReader for Android has you covered for all your Trail Camera Viewing needs.\nThis new model will give you the fastest, most compatible connection to almost\nany Android cellphone or tablet on the market today. It now sports a high-\nspeed direct USB-C cord end; which is the new reversible connector now\nstandard on all Android phones. Not only that, but we include an OTG \"On The\nGo\" compatible Micro-USB adapter to ensure you can still connect to the past\nAndroid phone models that have the USB external storage hosting support very\ncommon in most popular phone brands past 2015. The best part is the latest\nstock Android software does not require you to download additional\napplications to get all the best features of trail camera management including\nthe ability to view hundreds or thousands of deer pictures in full-screen view\nwith the ability to easily swipe through right from the SD or MicroSD memory\nchips from any trail camera card of any size or class 4-GB or higher. No need\nto import all of the photos to your phone using up valuable storage space\nbefore you can view them. Leave the laptop or bulky photo viewer tablets at\nhome and take advantage of the super computer already in your pocket. This\nreally is the most plug and play model yet, and if for some reason it doesn't\nwork for you we will always have your back to keep our customers happy! At\nBoneView we take a lot of pride in doing our best to have the best performing\nTrail Camera Viewers for Smartphones. Ever since introducing this amazing\ntechnology to hunters in 2015 we have been hard at it in Minnesota and\nWisconsin continually testing this in the field all year-long to stay abreast\nof the ever-changing technology. You can be sure you are getting the best from\nus, and we will always be here for you to make sure our products meet your\nexpectations for a long time.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eNEW EDITION FOR ALL LATEST TYPE-C ANDROID PHONES - Designed specifically for hunters to instantly view, save, share and delete your trail camera pictures and videos with your smartphone or tablet\u003c\/li\u003e\n \u003cli\u003eREADS ALL TRAIL CAMERA SD AND MICRO-SD MEMORY CARDS from all major trail cameras on the market\u003c\/li\u003e\n \u003cli\u003eINSTANTLY PLUG AND PLAY - No Extra Apps Required and Still Able to Quickly Swipe Through and Save Thousands of Photos or Play Most Video Files with Super Fast Transfer Speeds\u003c\/li\u003e\n \u003cli\u003eUSE ANYWHERE IN THE WOODS - No Internet, Wi-Fi or Cell Service Required Ever, No Batteries Either\u003c\/li\u003e\n \u003cli\u003eBUY WITH CONFIDENCE - Bone View will always stand behind their products and make sure they work well for you no matter what\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}
BoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo & Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter
$145.00 AUD
BoneView SD Card Reader for Android - Type C USB Trail Camera Viewer Play Deer Hunting Photo & Video from All Game Cam Memory on Any Smart Phone, Samsung, Moto, LG + Free MicroUSB OTG Adapter Read more "BoneView Trail Camera Viewers - The Ultimate Tool for Hunting and Scouting" Our Latest Edition of the BoneView SD Card Reader for Android ha...
