{"id":7478842786029,"title":"Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras","handle":"vantrue-11-5ft-mini-usb-dash-cam-hardwire-kit-with-12v-24v-to-5v-fuse-holders-low-voltage-battery-drain-protection-compatible-with-apeman-rexing-vantrue-n2-pro-n2-t2-n1-pro-x4-m2-cameras","description":"\u003ch3\u003eVantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eVantrue N2 Pro Uber Dual Dash Cam Vantrue T2\nSupercapacitor Dash Cam Vantrue N1 Pro Dash Cam Vantrue N2 Uber Dual Dash Cam\nVantrue X4 4K Capacitor dash cam Resolution Dual:19201080 60fps, Single Front\n1920x1080 60fps or 2560x1440 30fps 1920x1080 30fps 1920X1080 30fps\nDual:1440x1080 30fps+1280x720 30fps, Single Front 1920x1080 30fps 4K\n3840X2160P 30fps, 2560X1440P 60fps 2560x1440 30fps Lens F\/1.8,170°+ F\/2.0,\n140° F\/1.8, 160° F\/1.8, 160° F\/2.0, 170°+ F\/2.0, 140° F\/1.8, 160° Camera Type\nFront+Inside Front Front Front+Inside Front Display 1.5“ inch 2“ inch 1.5“\ninch 1.5“ inch 3“ inch Microphone \u0026amp; Speaker Built-in Built-in Built-in Built-\nin Built-in Storage Up to 256GB MicroSD Card Up to 256GB MicroSD Card Up to\n256GB MicroSD Card Up to 64GB MicroSD Card Up to 256GB MicroSD Card Battery \u0026amp;\nCharging Built in battery Supercapacitor Built in battery Built in battery\nSupercapacitor GPS Logger Optional Optional Optional Optional Optional Read\nmore Key Features 24\/7 Parking Surveillance Directly to the battery for\nconstant 24hrs\/7days power to protect against theft when your car is in the\nparking lot. Directly to the ignition wire for power only so it can turn on\nand off with the ignition. Compatible 12 – 24V Vehicles This hardwire kit\naccepts voltage from any type of vehicles runs on 12 – 24V, works perfect for\ncar, truck, bus, suvs, or big rig for continuous power. Low Voltage Protection\nSmart low voltage protection automatically shut off the power to your dash cam\nwhen the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), thus\npreventing it draining the battery. Read more Installation Instruction Find\nthe Correct Fuse Slot Open the fuse box, find the correct fuse slot for your\nhardwire kit. If you need to find an ignition switched fuse, put the key in\nthe vehicle, find the fuse which is not lit up while the car is off, and test\nit by turning the car on to see if it lights up. If your kit requires constant\npower, turn off the car and remove the key to see which fuse slots stays lit\non. Connect the Red Wire Once you've determined which fuse slots you need to\nuse for your hardwiring kit you can crimp the red wire of your hardwire kit\nonto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse\nyou just removed into the installation kit add-a-fuse circuit. Plug the add-a-\ncircuit into the fuse box in the correct orientation. Ground the Hardwiring\nKit Slip the black wire (which is in the shape of a C) under a metal bolt or\nscrew in your vehicle (this is the ground wire). Check that it is not attached\nonto plastic parts. You will typically need a socket wrench to loosen the nut\nor bolt that you choose to ground with. To attach the grounding terminal,\nloosen the nut or bolt enough to slip it in and tighten it back up afterwards.\nRead more Key Features Compatible with 12-24Vdc for car or truck\ninstallations. Perfect for 24\/7 Parking Surveillance.Low voltage protection\nprotects against battery dying.Compatible with Apeman, Rexing, Toguard,\nVantrue N2 Pro, N2, N1 Pro, T2, X4, X3, X1 and all the other mini usb dash\ncams! Keep 12V or 24V outlet free, charge your phone at the same time.Less\nstatic when you’re listening to the radio. Less Complicated Install with the\ninstallation video. What’s in the box Vantrue 11.5ft Mini USB Dash Cam\nHardwire Kit with User ManualMini\/LP ACN Add-A-Circuit Fuse HolderMini ACS\nAdd-A-Circuit Fuse HolderATO ACU Add-A-Circuit Fuse HolderMicro2 Add-A-Circuit\nFuse Holder Technical Details Connector: Mini USB Connector Input Voltage: DC\n12V-24V Output Voltage: 5V Output Current: 2A Working Temperature: -22°F to\n167°F (-30°C to 75°C) Cable Length: 11.5ft Low Voltage Protection: 11.6V for\n12V vehicle; 23.2V for 24V vehicle. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCompatible 12 24V VehiclesThis hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 24V.\u003c\/li\u003e\n \u003cli\u003e24\/7 Parking Surveillance without draining the batteryDirectly to the battery for constant 24hrs\/7days power to protect against theft when your car is in the parking lot. With the smart low voltage protection, it will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it draining the battery. Note: If your car requires a start voltage higher than 11.6V for 24 hours parking mode, this hardwire kit may not work for your car.\u003c\/li\u003e\n \u003cli\u003ePower SupplyDirectly to the ignition wire for power only so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.\u003c\/li\u003e\n \u003cli\u003eMulitiple usesMini USB plug compatible with all mini usb dash cams such as Apeman, Rexing, Toguard, Vantrue N2 Pro\/N2\/M2\/X3\/T2\/N1 Pro\/X1\/X4, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices. Please note: It doesn't work for Vantrue S1 Dash Cam.\u003c\/li\u003e\n \u003cli\u003eEasy to Install4 add a fuse holders included, simply find the right one for your car. Installation instruction and video included, easy to install.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-12-04T18:55:26+11:00","created_at":"2021-12-04T18:55:26+11:00","vendor":"VANTRUE","type":"On-Dash Cameras","tags":["leo115"],"price":13500,"price_min":13500,"price_max":13500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42160104669421,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07G9WTWB9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras","public_title":null,"options":["Default Title"],"price":13500,"weight":150,"compare_at_price":null,"inventory_management":null,"barcode":"720355777890","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B07G9WTWB9.jpg?v=1651911889","\/\/leoforward.com\/cdn\/shop\/products\/61JtuaorjZL.jpg?v=1638604527","\/\/leoforward.com\/cdn\/shop\/products\/61cKY9Yf9jS.jpg?v=1638604527","\/\/leoforward.com\/cdn\/shop\/products\/71HBDGmSqsL.jpg?v=1638604527","\/\/leoforward.com\/cdn\/shop\/products\/61H6dvhbzVL.jpg?v=1638604527","\/\/leoforward.com\/cdn\/shop\/products\/71M_SITApVL.jpg?v=1638604527","\/\/leoforward.com\/cdn\/shop\/products\/61NfCJAdabL.jpg?v=1638604527"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B07G9WTWB9.jpg?v=1651911889","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras","id":29707728388333,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1107,"width":1107,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B07G9WTWB9.jpg?v=1651911889"},"aspect_ratio":1.0,"height":1107,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B07G9WTWB9.jpg?v=1651911889","width":1107},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras","id":28790973038829,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61JtuaorjZL.jpg?v=1638604527"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61JtuaorjZL.jpg?v=1638604527","width":1200},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras","id":28790973071597,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61cKY9Yf9jS.jpg?v=1638604527"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61cKY9Yf9jS.jpg?v=1638604527","width":1200},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras","id":28790973104365,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71HBDGmSqsL.jpg?v=1638604527"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71HBDGmSqsL.jpg?v=1638604527","width":1200},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras","id":28790973137133,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61H6dvhbzVL.jpg?v=1638604527"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61H6dvhbzVL.jpg?v=1638604527","width":1200},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras","id":28790973169901,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71M_SITApVL.jpg?v=1638604527"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71M_SITApVL.jpg?v=1638604527","width":1200},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras","id":28790973202669,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61NfCJAdabL.jpg?v=1638604527"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61NfCJAdabL.jpg?v=1638604527","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eVantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Vantrue N2 Pro, N2, T2, N1 Pro, X4, M2 Cameras\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eVantrue N2 Pro Uber Dual Dash Cam Vantrue T2\nSupercapacitor Dash Cam Vantrue N1 Pro Dash Cam Vantrue N2 Uber Dual Dash Cam\nVantrue X4 4K Capacitor dash cam Resolution Dual:19201080 60fps, Single Front\n1920x1080 60fps or 2560x1440 30fps 1920x1080 30fps 1920X1080 30fps\nDual:1440x1080 30fps+1280x720 30fps, Single Front 1920x1080 30fps 4K\n3840X2160P 30fps, 2560X1440P 60fps 2560x1440 30fps Lens F\/1.8,170°+ F\/2.0,\n140° F\/1.8, 160° F\/1.8, 160° F\/2.0, 170°+ F\/2.0, 140° F\/1.8, 160° Camera Type\nFront+Inside Front Front Front+Inside Front Display 1.5“ inch 2“ inch 1.5“\ninch 1.5“ inch 3“ inch Microphone \u0026amp; Speaker Built-in Built-in Built-in Built-\nin Built-in Storage Up to 256GB MicroSD Card Up to 256GB MicroSD Card Up to\n256GB MicroSD Card Up to 64GB MicroSD Card Up to 256GB MicroSD Card Battery \u0026amp;\nCharging Built in battery Supercapacitor Built in battery Built in battery\nSupercapacitor GPS Logger Optional Optional Optional Optional Optional Read\nmore Key Features 24\/7 Parking Surveillance Directly to the battery for\nconstant 24hrs\/7days power to protect against theft when your car is in the\nparking lot. Directly to the ignition wire for power only so it can turn on\nand off with the ignition. Compatible 12 – 24V Vehicles This hardwire kit\naccepts voltage from any type of vehicles runs on 12 – 24V, works perfect for\ncar, truck, bus, suvs, or big rig for continuous power. Low Voltage Protection\nSmart low voltage protection automatically shut off the power to your dash cam\nwhen the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), thus\npreventing it draining the battery. Read more Installation Instruction Find\nthe Correct Fuse Slot Open the fuse box, find the correct fuse slot for your\nhardwire kit. If you need to find an ignition switched fuse, put the key in\nthe vehicle, find the fuse which is not lit up while the car is off, and test\nit by turning the car on to see if it lights up. If your kit requires constant\npower, turn off the car and remove the key to see which fuse slots stays lit\non. Connect the Red Wire Once you've determined which fuse slots you need to\nuse for your hardwiring kit you can crimp the red wire of your hardwire kit\nonto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse\nyou just removed into the installation kit add-a-fuse circuit. Plug the add-a-\ncircuit into the fuse box in the correct orientation. Ground the Hardwiring\nKit Slip the black wire (which is in the shape of a C) under a metal bolt or\nscrew in your vehicle (this is the ground wire). Check that it is not attached\nonto plastic parts. You will typically need a socket wrench to loosen the nut\nor bolt that you choose to ground with. To attach the grounding terminal,\nloosen the nut or bolt enough to slip it in and tighten it back up afterwards.\nRead more Key Features Compatible with 12-24Vdc for car or truck\ninstallations. Perfect for 24\/7 Parking Surveillance.Low voltage protection\nprotects against battery dying.Compatible with Apeman, Rexing, Toguard,\nVantrue N2 Pro, N2, N1 Pro, T2, X4, X3, X1 and all the other mini usb dash\ncams! Keep 12V or 24V outlet free, charge your phone at the same time.Less\nstatic when you’re listening to the radio. Less Complicated Install with the\ninstallation video. What’s in the box Vantrue 11.5ft Mini USB Dash Cam\nHardwire Kit with User ManualMini\/LP ACN Add-A-Circuit Fuse HolderMini ACS\nAdd-A-Circuit Fuse HolderATO ACU Add-A-Circuit Fuse HolderMicro2 Add-A-Circuit\nFuse Holder Technical Details Connector: Mini USB Connector Input Voltage: DC\n12V-24V Output Voltage: 5V Output Current: 2A Working Temperature: -22°F to\n167°F (-30°C to 75°C) Cable Length: 11.5ft Low Voltage Protection: 11.6V for\n12V vehicle; 23.2V for 24V vehicle. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCompatible 12 24V VehiclesThis hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 24V.\u003c\/li\u003e\n \u003cli\u003e24\/7 Parking Surveillance without draining the batteryDirectly to the battery for constant 24hrs\/7days power to protect against theft when your car is in the parking lot. With the smart low voltage protection, it will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it draining the battery. Note: If your car requires a start voltage higher than 11.6V for 24 hours parking mode, this hardwire kit may not work for your car.\u003c\/li\u003e\n \u003cli\u003ePower SupplyDirectly to the ignition wire for power only so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.\u003c\/li\u003e\n \u003cli\u003eMulitiple usesMini USB plug compatible with all mini usb dash cams such as Apeman, Rexing, Toguard, Vantrue N2 Pro\/N2\/M2\/X3\/T2\/N1 Pro\/X1\/X4, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices. Please note: It doesn't work for Vantrue S1 Dash Cam.\u003c\/li\u003e\n \u003cli\u003eEasy to Install4 add a fuse holders included, simply find the right one for your car. Installation instruction and video included, easy to install.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7475383369965,"title":"Wired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black","handle":"wired-carplay-dongle-for-car-screen-with-android-system-4-4-2-or-above-support-android-auto-mirroring-usb-connect-siri-voice-control-google-maps-upgrade-black","description":"\u003ch3\u003eWired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eProfessional version and wireless version of the APK,\ndownload the address : 1. You need to prepare a USB flash drive. After\ndownloading it, I will send your APK file to the USB flash drive (the QR code\non the package is also the download address) 2. Insert the U disk into the USB\nport of the navigator, find the file management menu, select the APK file in\nthe USB, install the APK, after installation, an icon will appear on the\nnavigator 3. Then plug our machine into the USB of the navigation machine,\nplug in the mobile phone data cable, connect to the mobile phone, and wait for\na few seconds. 1.Android Auto(only wired connection) Android Auto Support\nVoice Control\/Music\/Maps\/Real-time Navigation\/Phone calls etc. 2.Screen\nMirrorlink Use Mirroring to stream or share content from your phone to your\ncar screen. FAQS: You can issue calls,navigation,and other operations through\nsiri.Free your hands for safer dirving Download mainstream map software sync\nmodile phone data,search,Mobile offline map synchronizes mobile phone music\nand third-party music apps,listen to whatever you want,Travel more fun Read\nmore How to upgrade online: 1. The car is connected to the network.2. When the\nphone is not connected, click the setting icon on top left of Autokit.3.\nScroll down to the bottom and select \"Check for Updates\".4. Then select\n\"software version\", first upgrade the software version.5. Select \"Box Firmware\nUpdate\" to download and update it.6. After the update, the Autokit will be\nrestarted, and then connect to the phone again to use product. notice: 1.\n\"Software version\" and \"Box version\" cannot be upgraded together, they must be\nupgraded separately.2. When updating the \"boxed version\", please connect the\ndongle into the car Android navigation USB port. Upload log function: There\nwill still be some minor problems after upgrading the latest version, please\nupload the log. It will collect your use problems that occur when using\ncarplay. Our engineers will research the solution and add it to the next\nupgrade version, so that we have the opportunity to solve this problem. FAQS:\n1. How to confirm whether the car is supported? This product only supports\nAndroid system broadcast host\/navigation. You need to install the Autokit\napplication on the car’s Android screen first. Otherwise, you will not be able\nto use it in the car;Download the AutoKit software, enter the settings,\nenvironment detection, if it shows that it is available, you can use it 2. A\nblack screen after the mobile phone is connected: Turn off the \"Handbrake\nsetting\" or turn on the \"Watch video while driving\" .Set the \"Run Mode\" or\n\"Rendering Mode\". 3. How to upgrade the product? Connect the car and machine,\nenter the software settings, click to check for updates .Upgrade the APK\nfirst, then upgrade the box .When upgrading the box, do not power off or\nremove the box.caveat:1. The \"software version\" and \"boxed version\" cannot be\nupgraded at the same time, they must be upgraded separately.2. When updating\nthe \"boxed version\", please connect the dongle to the car’s Android navigation\nUSB port 4.Android Auto connected to the phone to restart: This problem is\ncaused by Google upgrading the Chrome browser.We have updated our firmware to\nsolve this problem, just upgrade to the latest version online. 5. My phone is\nan Android phone, which one should I choose? If your phone is an Android\nphone, your phone needs to be equipped with Google’s Android auto.If you just\nwant to use Android auto, you can buy (CPC200-CCPM); if you have other Apple\nphones, you can buy (CPC200 -AutoKit), which can provide wireless Carplay\nfunction\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCOMPATIBLE DEVICES Car stereos with android version(4.4.2 and above), (The product supports most Android market phones, but it's not 100% supportting all Android phone and Android autoradio.)\u003c\/li\u003e\n \u003cli\u003eMAIN FUNCTIONSupport Voice Control, Siri, GPS Navigation App(real-time navigation), Online Music App, Phone Call, Screen Mirroring, Support iOS13 split screen multiple windows. Please notice our device's operating speed is according your phone's ios speed.\u003c\/li\u003e\n \u003cli\u003eUPDATEABLE SYSTEMOnline upgrade of autokit apk and dongle box. Carplay Box supports online updates. It can Plug \u0026amp; Play with Android phone. This USB dongle can support Wired CarPlay, Wired Android Auto, Wired mirroring.\u003c\/li\u003e\n \u003cli\u003eQUALITY WARRANTYWe do strict quality control, we will check and use it before delivery to ensure every products can be used. If you can't install or other problems, please contact us, we will provide professional assistance. (If your car can't install the APK, you can't use my product.)\u003c\/li\u003e\n \u003cli\u003ePACKAGE INCLUDES1 x USB Carplay Donlge, 1 x User Manual.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-12-02T14:22:48+11:00","created_at":"2021-12-02T14:22:48+11:00","vendor":"Carlinkit","type":"In-Dash Navigation","tags":["leo115"],"price":19300,"price_min":19300,"price_max":19300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42151381467373,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"B08FG3QTZ5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black - Black","public_title":"Black","options":["Black"],"price":19300,"weight":9,"compare_at_price":null,"inventory_management":null,"barcode":"U-CCPM-LOGO-BK","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B08FG3QTZ5.jpg?v=1651907662","\/\/leoforward.com\/cdn\/shop\/products\/61XcHn5zSnL.jpg?v=1638415368","\/\/leoforward.com\/cdn\/shop\/products\/61aJ-3f58_L.jpg?v=1638415368","\/\/leoforward.com\/cdn\/shop\/products\/61RmD2eZwtL.jpg?v=1638415368","\/\/leoforward.com\/cdn\/shop\/products\/61EkX1Qod2L.jpg?v=1638415368","\/\/leoforward.com\/cdn\/shop\/products\/612ri6no6cL.jpg?v=1638415368","\/\/leoforward.com\/cdn\/shop\/products\/61sY8ZPS6bL.jpg?v=1638415368"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B08FG3QTZ5.jpg?v=1651907662","options":["Color"],"media":[{"alt":" [AUSTRALIA] - Wired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black","id":29707310989549,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B08FG3QTZ5.jpg?v=1651907662"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B08FG3QTZ5.jpg?v=1651907662","width":1000},{"alt":" [AUSTRALIA] - Wired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black","id":28776261714157,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61XcHn5zSnL.jpg?v=1638415368"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61XcHn5zSnL.jpg?v=1638415368","width":1000},{"alt":" [AUSTRALIA] - Wired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black","id":28776261746925,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61aJ-3f58_L.jpg?v=1638415368"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61aJ-3f58_L.jpg?v=1638415368","width":1000},{"alt":" [AUSTRALIA] - Wired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black","id":28776261779693,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61RmD2eZwtL.jpg?v=1638415368"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61RmD2eZwtL.jpg?v=1638415368","width":1000},{"alt":" [AUSTRALIA] - Wired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black","id":28776261812461,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61EkX1Qod2L.jpg?v=1638415368"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61EkX1Qod2L.jpg?v=1638415368","width":1000},{"alt":" [AUSTRALIA] - Wired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black","id":28776261845229,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/612ri6no6cL.jpg?v=1638415368"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/612ri6no6cL.jpg?v=1638415368","width":1000},{"alt":" [AUSTRALIA] - Wired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black","id":28776261877997,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61sY8ZPS6bL.jpg?v=1638415368"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61sY8ZPS6bL.jpg?v=1638415368","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eWired CarPlay Dongle for Car Screen with Android System 4.4.2 or Above, Support Android Auto\/Mirroring\/USB Connect\/SIRI Voice Control\/Google Maps\/Upgrade, Black\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eProfessional version and wireless version of the APK,\ndownload the address : 1. You need to prepare a USB flash drive. After\ndownloading it, I will send your APK file to the USB flash drive (the QR code\non the package is also the download address) 2. Insert the U disk into the USB\nport of the navigator, find the file management menu, select the APK file in\nthe USB, install the APK, after installation, an icon will appear on the\nnavigator 3. Then plug our machine into the USB of the navigation machine,\nplug in the mobile phone data cable, connect to the mobile phone, and wait for\na few seconds. 1.Android Auto(only wired connection) Android Auto Support\nVoice Control\/Music\/Maps\/Real-time Navigation\/Phone calls etc. 2.Screen\nMirrorlink Use Mirroring to stream or share content from your phone to your\ncar screen. FAQS: You can issue calls,navigation,and other operations through\nsiri.Free your hands for safer dirving Download mainstream map software sync\nmodile phone data,search,Mobile offline map synchronizes mobile phone music\nand third-party music apps,listen to whatever you want,Travel more fun Read\nmore How to upgrade online: 1. The car is connected to the network.2. When the\nphone is not connected, click the setting icon on top left of Autokit.3.\nScroll down to the bottom and select \"Check for Updates\".4. Then select\n\"software version\", first upgrade the software version.5. Select \"Box Firmware\nUpdate\" to download and update it.6. After the update, the Autokit will be\nrestarted, and then connect to the phone again to use product. notice: 1.\n\"Software version\" and \"Box version\" cannot be upgraded together, they must be\nupgraded separately.2. When updating the \"boxed version\", please connect the\ndongle into the car Android navigation USB port. Upload log function: There\nwill still be some minor problems after upgrading the latest version, please\nupload the log. It will collect your use problems that occur when using\ncarplay. Our engineers will research the solution and add it to the next\nupgrade version, so that we have the opportunity to solve this problem. FAQS:\n1. How to confirm whether the car is supported? This product only supports\nAndroid system broadcast host\/navigation. You need to install the Autokit\napplication on the car’s Android screen first. Otherwise, you will not be able\nto use it in the car;Download the AutoKit software, enter the settings,\nenvironment detection, if it shows that it is available, you can use it 2. A\nblack screen after the mobile phone is connected: Turn off the \"Handbrake\nsetting\" or turn on the \"Watch video while driving\" .Set the \"Run Mode\" or\n\"Rendering Mode\". 3. How to upgrade the product? Connect the car and machine,\nenter the software settings, click to check for updates .Upgrade the APK\nfirst, then upgrade the box .When upgrading the box, do not power off or\nremove the box.caveat:1. The \"software version\" and \"boxed version\" cannot be\nupgraded at the same time, they must be upgraded separately.2. When updating\nthe \"boxed version\", please connect the dongle to the car’s Android navigation\nUSB port 4.Android Auto connected to the phone to restart: This problem is\ncaused by Google upgrading the Chrome browser.We have updated our firmware to\nsolve this problem, just upgrade to the latest version online. 5. My phone is\nan Android phone, which one should I choose? If your phone is an Android\nphone, your phone needs to be equipped with Google’s Android auto.If you just\nwant to use Android auto, you can buy (CPC200-CCPM); if you have other Apple\nphones, you can buy (CPC200 -AutoKit), which can provide wireless Carplay\nfunction\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCOMPATIBLE DEVICES Car stereos with android version(4.4.2 and above), (The product supports most Android market phones, but it's not 100% supportting all Android phone and Android autoradio.)\u003c\/li\u003e\n \u003cli\u003eMAIN FUNCTIONSupport Voice Control, Siri, GPS Navigation App(real-time navigation), Online Music App, Phone Call, Screen Mirroring, Support iOS13 split screen multiple windows. Please notice our device's operating speed is according your phone's ios speed.\u003c\/li\u003e\n \u003cli\u003eUPDATEABLE SYSTEMOnline upgrade of autokit apk and dongle box. Carplay Box supports online updates. It can Plug \u0026amp; Play with Android phone. This USB dongle can support Wired CarPlay, Wired Android Auto, Wired mirroring.\u003c\/li\u003e\n \u003cli\u003eQUALITY WARRANTYWe do strict quality control, we will check and use it before delivery to ensure every products can be used. If you can't install or other problems, please contact us, we will provide professional assistance. (If your car can't install the APK, you can't use my product.)\u003c\/li\u003e\n \u003cli\u003ePACKAGE INCLUDES1 x USB Carplay Donlge, 1 x User Manual.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7464729510125,"title":"AZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection","handle":"azdome-3-lead-acc-hardwire-kit-mini-usb-port-for-m550-dash-cam-12ft-with-fuse-kit-for-dash-camera-24h-parking-monitor-mode-converts-12v-24v-to-output-5v-3a-max-low-voltage-protection","description":"\u003ch3\u003eAZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eAZDOME 3-Lead ACC Mini-USB Port Hardwire Kit contains all the components\nrequired to easily piggyback on the fuse box of any vehicle. Simply plug the\nrequired fuse tap cable into the vehicle’s fuse box to provide the camera with\nits own power supply. This allows the Dash Cam to be installed in your vehicle\nwithout the need to use the 12V outlet (car cigarette socket). With the\nHardwire Kit installed, the Dash Cam will power on and start recording\nautomatically when the vehicle is opened or starts. If you turn on the\nfunction of parking monitoring on the dash cam, it will automatically enter\nthe time-lapse recording mode or the continuous recording mode. The inbuilt\nminimum voltage limiter will protect the vehicle's battery from going flat.\nThe AZDOME 3-lead Mini USB Hardwire Kit is a power management device that\nprovides power to your dashcam from your car’s battery via fuse box to keep\nyour dashcam continuously running even after your engine is turned off to\nutilize the 24HR Parking Monitor feature. The output current can reach 5V\/3A.\nIt can match with AZDOME M550 dash cam. AZDOME M550 dash cam is built in Super\nCapacitor. No power pack or batteries. It must be powered by connecting to\nyour car in one of three ways direct connect to a fuse, cigarette light\nadapter or a OBD cable. So if you want to use parking mode you need to\npurchase hard-wiring kit with 3 wires, the output current need reach 5V\/2.5A.\nSteps: 1. Please connect the red wire to ACC, the yellow wire to always\npowered, and the black wire to ground. 2. If the AZDOME hardwire kit is\nconnected correct, find the \"Park\" menu in the menu, press OK to select\nconnected, tick parking monitoring, and press the menu button to exit and save\nthe settings 3. Once the car turns on ACC, AZDOME M550 dash cam will\nautomatically turn on, and once the car turns off, the camera will enter time-\nlapse video parking monitoring mode automatically when hardwire the camera\ncorrect.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAZDOME 3-Lead ACC Mini-USB Port Hardwire Kit - This allows the Dash Cam to be installed in your vehicle without the need to use the 12V outlet (car cigarette socket). Converts 12V-24V to Output 5V\/3A Max.\u003c\/li\u003e\n \u003cli\u003eAutomatically Enter Parking Mode - With the Hardwire Kit installed, the Dash Cam will power on and start recording automatically when the vehicle is opened or starts. If you turn on the function of parking monitoring on the dash cam, it will automatically enter the time-lapse recording mode or the continuous recording mode.\u003c\/li\u003e\n \u003cli\u003eLow Voltage Protection - The inbuilt minimum voltage limiter will protect the vehicle's battery from going flat. If the voltage of your car battery drops to 11.6V or 23.5V, it will cut off the power, which leaves you with enough power to start your car for the next time.\u003c\/li\u003e\n \u003cli\u003eComplete Accessories - Contains all the components required to easily piggyback on the fuse box of any vehicle. Simply plug the required fuse tap cable into the vehicles fuse box to provide the camera with its own power supply.\u003c\/li\u003e\n \u003cli\u003eWorry-Free Aftersales - Every customer is fully covered by 1-YEAR WARRANTY. If youre having any doubts, it comes with a Full Refund within 30 DAYS. As always, AZDOME promises you 24\/7 online customer service.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-11-25T17:47:07+11:00","created_at":"2021-11-25T17:47:07+11:00","vendor":"AZDOME","type":"On-Dash Cameras","tags":["leo115"],"price":18900,"price_min":18900,"price_max":18900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42124600705261,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B096G6FKZP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection","public_title":null,"options":["Default Title"],"price":18900,"weight":209,"compare_at_price":null,"inventory_management":null,"barcode":"JYX02","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B096G6FKZP.jpg?v=1651874575","\/\/leoforward.com\/cdn\/shop\/products\/61GYiT9h4vS.jpg?v=1637822827","\/\/leoforward.com\/cdn\/shop\/products\/61l3WQhu3yS.jpg?v=1637822827","\/\/leoforward.com\/cdn\/shop\/products\/61QMMT26D7S.jpg?v=1637822827","\/\/leoforward.com\/cdn\/shop\/products\/61q2lHo9zSL.jpg?v=1637822827","\/\/leoforward.com\/cdn\/shop\/products\/61nDmqL1svS.jpg?v=1637822827","\/\/leoforward.com\/cdn\/shop\/products\/714PpSuV_cS.jpg?v=1637822827"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B096G6FKZP.jpg?v=1651874575","options":["Title"],"media":[{"alt":" [AUSTRALIA] - AZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection","id":29705431974125,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B096G6FKZP.jpg?v=1651874575"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B096G6FKZP.jpg?v=1651874575","width":1000},{"alt":" [AUSTRALIA] - AZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection","id":28731064353005,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61GYiT9h4vS.jpg?v=1637822827"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61GYiT9h4vS.jpg?v=1637822827","width":1000},{"alt":" [AUSTRALIA] - AZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection","id":28731064385773,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61l3WQhu3yS.jpg?v=1637822827"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61l3WQhu3yS.jpg?v=1637822827","width":1000},{"alt":" [AUSTRALIA] - AZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection","id":28731064418541,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61QMMT26D7S.jpg?v=1637822827"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61QMMT26D7S.jpg?v=1637822827","width":1000},{"alt":" [AUSTRALIA] - AZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection","id":28731064451309,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61q2lHo9zSL.jpg?v=1637822827"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61q2lHo9zSL.jpg?v=1637822827","width":1000},{"alt":" [AUSTRALIA] - AZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection","id":28731064484077,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61nDmqL1svS.jpg?v=1637822827"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61nDmqL1svS.jpg?v=1637822827","width":1000},{"alt":" [AUSTRALIA] - AZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection","id":28731064516845,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/714PpSuV_cS.jpg?v=1637822827"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/714PpSuV_cS.jpg?v=1637822827","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V\/3A Max, Low Voltage Protection\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eAZDOME 3-Lead ACC Mini-USB Port Hardwire Kit contains all the components\nrequired to easily piggyback on the fuse box of any vehicle. Simply plug the\nrequired fuse tap cable into the vehicle’s fuse box to provide the camera with\nits own power supply. This allows the Dash Cam to be installed in your vehicle\nwithout the need to use the 12V outlet (car cigarette socket). With the\nHardwire Kit installed, the Dash Cam will power on and start recording\nautomatically when the vehicle is opened or starts. If you turn on the\nfunction of parking monitoring on the dash cam, it will automatically enter\nthe time-lapse recording mode or the continuous recording mode. The inbuilt\nminimum voltage limiter will protect the vehicle's battery from going flat.\nThe AZDOME 3-lead Mini USB Hardwire Kit is a power management device that\nprovides power to your dashcam from your car’s battery via fuse box to keep\nyour dashcam continuously running even after your engine is turned off to\nutilize the 24HR Parking Monitor feature. The output current can reach 5V\/3A.\nIt can match with AZDOME M550 dash cam. AZDOME M550 dash cam is built in Super\nCapacitor. No power pack or batteries. It must be powered by connecting to\nyour car in one of three ways direct connect to a fuse, cigarette light\nadapter or a OBD cable. So if you want to use parking mode you need to\npurchase hard-wiring kit with 3 wires, the output current need reach 5V\/2.5A.\nSteps: 1. Please connect the red wire to ACC, the yellow wire to always\npowered, and the black wire to ground. 2. If the AZDOME hardwire kit is\nconnected correct, find the \"Park\" menu in the menu, press OK to select\nconnected, tick parking monitoring, and press the menu button to exit and save\nthe settings 3. Once the car turns on ACC, AZDOME M550 dash cam will\nautomatically turn on, and once the car turns off, the camera will enter time-\nlapse video parking monitoring mode automatically when hardwire the camera\ncorrect.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAZDOME 3-Lead ACC Mini-USB Port Hardwire Kit - This allows the Dash Cam to be installed in your vehicle without the need to use the 12V outlet (car cigarette socket). Converts 12V-24V to Output 5V\/3A Max.\u003c\/li\u003e\n \u003cli\u003eAutomatically Enter Parking Mode - With the Hardwire Kit installed, the Dash Cam will power on and start recording automatically when the vehicle is opened or starts. If you turn on the function of parking monitoring on the dash cam, it will automatically enter the time-lapse recording mode or the continuous recording mode.\u003c\/li\u003e\n \u003cli\u003eLow Voltage Protection - The inbuilt minimum voltage limiter will protect the vehicle's battery from going flat. If the voltage of your car battery drops to 11.6V or 23.5V, it will cut off the power, which leaves you with enough power to start your car for the next time.\u003c\/li\u003e\n \u003cli\u003eComplete Accessories - Contains all the components required to easily piggyback on the fuse box of any vehicle. Simply plug the required fuse tap cable into the vehicles fuse box to provide the camera with its own power supply.\u003c\/li\u003e\n \u003cli\u003eWorry-Free Aftersales - Every customer is fully covered by 1-YEAR WARRANTY. If youre having any doubts, it comes with a Full Refund within 30 DAYS. As always, AZDOME promises you 24\/7 online customer service.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7460759732461,"title":"Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","handle":"vantrue-11-5ft-type-c-usb-12v-24v-to-5v-dash-cam-hardwire-kit-with-mini-acs-ato-micro2-add-a-circuit-fuse-holders-low-voltage-protection-for-n4-n2s-dash-cam","description":"\u003ch3\u003eVantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more 24\/7 Parking Surveillance Directly to the\nbattery for constant 24hrs\/7days power to protect against theft when your car\nis in the parking lot.Directly to the ignition wire for power only so it can\nturn on and off with the ignition. Compatible 12 – 24V Vehicles This hardwire\nkit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect\nfor car, truck, bus, suvs, or big rig for continuous power. Low Voltage\nProtection Smart low voltage protection automatically shut off the power to\nyour dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V\ncars), thus preventing it draining the battery. Read more Find the Correct\nFuse Slot Open the fuse box, find the correct fuse slot for your hardwire kit.\nIf you need to find an ignition switched fuse, put the key in the vehicle,\nfind the fuse which is not lit up while the car is off, and test it by turning\nthe car on to see if it lights up. If your kit requires constant power, turn\noff the car and remove the key to see which fuse slots stays lit on. Connect\nthe Red Wire Once you've determined which fuse slots you need to use for your\nhardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-\nFuse. Gently remove the fuse you identified. Install the fuse you just removed\ninto the installation kit add-a-fuse circuit. Plug the add-a-circuit into the\nfuse box in the correct orientation. Ground the Hardwiring Kit Slip the black\nwire (which is in the shape of a C) under a metal bolt or screw in your\nvehicle (this is the ground wire). Check that it is not attached onto plastic\nparts. You will typically need a socket wrench to loosen the nut or bolt that\nyou choose to ground with. To attach the grounding terminal, loosen the nut or\nbolt enough to slip it in and tighten it back up afterwards. Read more Key\nFeatures Compatible with 12-24Vdc for car or truck installations.Perfect for\n24\/7 Parking Surveillance.Low voltage protection protects against battery\ndying.Works well with Vantrue N4 dash cam and all the other type c usb dash\ncams!Keep 12V or 24V outlet free, charge your phone at the same time.Less\nstatic when you’re listening to the radio. Less Complicated Install with the\ninstallation video. What’s in the box? Vantrue 11.5ft Mini USB Dash Cam\nHardwire Kit with User ManualMini\/LP ACN Add-A-Circuit Fuse HolderMini ACS\nAdd-A-Circuit Fuse HolderATO ACU Add-A-Circuit Fuse HolderMicro2 Add-A-Circuit\nFuse Holder Technical Details Connector: Type C USB Connector Input Voltage:\nDC 12V-24V Output Voltage: 5V Output Current: 2A Working Temperature: -22°F to\n167°F (-30°C to 75°C) Cable Length: 11.5ft Low Voltage Protection: 11.6V for\n12V vehicle; 23.2V for 24V vehicle. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCompatible 12 24V VehiclesThis hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 24V.\u003c\/li\u003e\n \u003cli\u003e24\/7 Parking SurveillanceDirectly to the battery for constant 24hrs\/7days power to protect against theft when your car is in the parking lot.\u003c\/li\u003e\n \u003cli\u003eACC mode with Switch ButtonWith the switch button, you can easily set the hardwire kit to ACC mode, so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.\u003c\/li\u003e\n \u003cli\u003eLow voltage protectionIt has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it draining the battery.\u003c\/li\u003e\n \u003cli\u003eMulitiple usesType C USB plug compatible with all Type C dash cams, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices. Please note: It doesn't work for other Vantrue Dash Cams, it only work for N4 and N2S, T3 dash cam.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-11-23T04:51:37+11:00","created_at":"2021-11-23T04:51:37+11:00","vendor":"VANTRUE","type":"Overhead Video","tags":["leo115"],"price":14500,"price_min":14500,"price_max":14500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42115147366637,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B083XB8T7T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","public_title":null,"options":["Default Title"],"price":14500,"weight":150,"compare_at_price":null,"inventory_management":null,"barcode":"193368000727","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B083XB8T7T.jpg?v=1651863237","\/\/leoforward.com\/cdn\/shop\/products\/B083XB8T7T-1.jpg?v=1650573965","\/\/leoforward.com\/cdn\/shop\/products\/71nJHDqumsL.jpg?v=1637603497","\/\/leoforward.com\/cdn\/shop\/products\/81GP_f7ed5L.jpg?v=1637603497","\/\/leoforward.com\/cdn\/shop\/products\/711ryCC3udL.jpg?v=1637603497","\/\/leoforward.com\/cdn\/shop\/products\/71VgWavlqkL.jpg?v=1637603497","\/\/leoforward.com\/cdn\/shop\/products\/71g_ZhxK2PL.jpg?v=1637603497","\/\/leoforward.com\/cdn\/shop\/products\/31DaIz_Oq0L.jpg?v=1637603497","\/\/leoforward.com\/cdn\/shop\/products\/61LFLq7eByL.jpg?v=1637603497"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B083XB8T7T.jpg?v=1651863237","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","id":29704677261549,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B083XB8T7T.jpg?v=1651863237"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B083XB8T7T.jpg?v=1651863237","width":1600},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","id":29616559948013,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B083XB8T7T-1.jpg?v=1650573965"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B083XB8T7T-1.jpg?v=1650573965","width":1600},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","id":28716305940717,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71nJHDqumsL.jpg?v=1637603497"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71nJHDqumsL.jpg?v=1637603497","width":1600},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","id":28716305973485,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81GP_f7ed5L.jpg?v=1637603497"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81GP_f7ed5L.jpg?v=1637603497","width":1600},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","id":28716306006253,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/711ryCC3udL.jpg?v=1637603497"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/711ryCC3udL.jpg?v=1637603497","width":1600},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","id":28716306039021,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71VgWavlqkL.jpg?v=1637603497"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71VgWavlqkL.jpg?v=1637603497","width":1600},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","id":28716306071789,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71g_ZhxK2PL.jpg?v=1637603497"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71g_ZhxK2PL.jpg?v=1637603497","width":1200},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","id":28716306104557,"position":8,"preview_image":{"aspect_ratio":1.0,"height":300,"width":300,"src":"\/\/leoforward.com\/cdn\/shop\/products\/31DaIz_Oq0L.jpg?v=1637603497"},"aspect_ratio":1.0,"height":300,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/31DaIz_Oq0L.jpg?v=1637603497","width":300},{"alt":" [AUSTRALIA] - Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam","id":28716306137325,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61LFLq7eByL.jpg?v=1637603497"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61LFLq7eByL.jpg?v=1637603497","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eVantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more 24\/7 Parking Surveillance Directly to the\nbattery for constant 24hrs\/7days power to protect against theft when your car\nis in the parking lot.Directly to the ignition wire for power only so it can\nturn on and off with the ignition. Compatible 12 – 24V Vehicles This hardwire\nkit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect\nfor car, truck, bus, suvs, or big rig for continuous power. Low Voltage\nProtection Smart low voltage protection automatically shut off the power to\nyour dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V\ncars), thus preventing it draining the battery. Read more Find the Correct\nFuse Slot Open the fuse box, find the correct fuse slot for your hardwire kit.\nIf you need to find an ignition switched fuse, put the key in the vehicle,\nfind the fuse which is not lit up while the car is off, and test it by turning\nthe car on to see if it lights up. If your kit requires constant power, turn\noff the car and remove the key to see which fuse slots stays lit on. Connect\nthe Red Wire Once you've determined which fuse slots you need to use for your\nhardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-\nFuse. Gently remove the fuse you identified. Install the fuse you just removed\ninto the installation kit add-a-fuse circuit. Plug the add-a-circuit into the\nfuse box in the correct orientation. Ground the Hardwiring Kit Slip the black\nwire (which is in the shape of a C) under a metal bolt or screw in your\nvehicle (this is the ground wire). Check that it is not attached onto plastic\nparts. You will typically need a socket wrench to loosen the nut or bolt that\nyou choose to ground with. To attach the grounding terminal, loosen the nut or\nbolt enough to slip it in and tighten it back up afterwards. Read more Key\nFeatures Compatible with 12-24Vdc for car or truck installations.Perfect for\n24\/7 Parking Surveillance.Low voltage protection protects against battery\ndying.Works well with Vantrue N4 dash cam and all the other type c usb dash\ncams!Keep 12V or 24V outlet free, charge your phone at the same time.Less\nstatic when you’re listening to the radio. Less Complicated Install with the\ninstallation video. What’s in the box? Vantrue 11.5ft Mini USB Dash Cam\nHardwire Kit with User ManualMini\/LP ACN Add-A-Circuit Fuse HolderMini ACS\nAdd-A-Circuit Fuse HolderATO ACU Add-A-Circuit Fuse HolderMicro2 Add-A-Circuit\nFuse Holder Technical Details Connector: Type C USB Connector Input Voltage:\nDC 12V-24V Output Voltage: 5V Output Current: 2A Working Temperature: -22°F to\n167°F (-30°C to 75°C) Cable Length: 11.5ft Low Voltage Protection: 11.6V for\n12V vehicle; 23.2V for 24V vehicle. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCompatible 12 24V VehiclesThis hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 24V.\u003c\/li\u003e\n \u003cli\u003e24\/7 Parking SurveillanceDirectly to the battery for constant 24hrs\/7days power to protect against theft when your car is in the parking lot.\u003c\/li\u003e\n \u003cli\u003eACC mode with Switch ButtonWith the switch button, you can easily set the hardwire kit to ACC mode, so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.\u003c\/li\u003e\n \u003cli\u003eLow voltage protectionIt has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it draining the battery.\u003c\/li\u003e\n \u003cli\u003eMulitiple usesType C USB plug compatible with all Type C dash cams, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices. Please note: It doesn't work for other Vantrue Dash Cams, it only work for N4 and N2S, T3 dash cam.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}