Plyisty Aluminum Alloy PC Power Supply Tester, Mini Portable ATX SATA Power Supply Tester, LCD Display Digital for ATX, BTX, ITX, TFX Supports Automatically Alarm
Plyisty Aluminum Alloy PC Power Supply Tester, Mini Portable ATX SATA Power Supply Tester, LCD Display Digital for ATX, BTX, ITX, TFX Supports Automatically Alarm
Description
Feature:1. The LCD displays various parameters such as output voltage and PG.When each parameter exceeds the normal value, the buzzer will sound a warning sound, and the corresponding value will flash2. This power tester only needs to be connected to the ATX connector of the power supply to easily and intuitively know whether the output of each power supply is normal.3. Can detect ATX, BTX, ITX, TFX computer power, and can display the voltage and PG value of each group of LCD, quickly detect the performance of computer power.4. It can measure the voltage of each group of the power supply 3.3V / + 5V / + 12V / -12V / SB + 5V / PG. If there is a fault, the buzzer will automatically alarm and the output wire P4 / P6 / P8 / SATA / IDE5. External DIE / SATA / P6 / P8 is light display, no LCD display voltage6. Only 24pin or 20pin can be connected to the LCD display voltage.Spec:Item Type: Power Supply TesterMaterial: Aluminum alloySupport 20Pin, 24Pin ATX power supplySupports SATA powerSupport 4Pin, 8Pin interface of P4Support PCI-E graphics card 6Pin power connectorSupport Xeco power interfaceSupport floppy drive power interfaceSupport standard 4Pin power interface SATA interfaceTest voltages are + 3.3V, -12V, + 5VSB, + 12V1, + 12V2, + 5VFeatures: PG automatic alarm, LCD shows the situation of each voltageOperation Method: A. Insert the power supply 20PIN or 24PIN and P4, P6 or P8 plug into the corresponding position of the power tester. (If you plug in the 20PIN or 24PIN interface tester to alarm and display LL, you need to plug in 4P! Please be sure that 4P must be inserted in the 4P position!)B. Turn on the power, and there will be two beep sounds at the same time
Features:
- External DIE / SATA / P6 / P8 is light display, no LCD display voltage
- This power tester only needs to be connected to the ATX connector of the power supply to easily and intuitively know whether the output of each power supply is normal.
- The LCD displays various parameters such as output voltage and PG.When each parameter exceeds the normal value, the buzzer will sound a warning sound, and the corresponding value will flash
- It can measure the voltage of each group of the power supply 3.3V / + 5V / + 12V / -12V / SB + 5V / PG. If there is a fault, the buzzer will automatically alarm and the output wire P4 / P6 / P8 / SATA / IDE
- Can detect ATX, BTX, ITX, TFX computer power, and can display the voltage and PG value of each group of LCD, quickly detect the performance of computer power.