gowoops

{"id":7008073515163,"title":"Gowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module for Arduino","handle":"gowoops-10-pcs-of-digital-light-intensity-detection-photosensitive-sensor-module-for-arduino","description":"\u003ch3\u003eGowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module for Arduino\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eApplication: Light intensity detection, intelligent car light module, with\ndirectional, only sense light source in front of the sensor, better to use for\nsearching light. Module Features : 1.Can detect the brightness and the ambient\nlight intensity (compared with photo-resistor, this module has better\ndirectionality , can sense light in fixed direction) 2.Adjustable sensitivity\n(use the blue digital potentiometer to adjust) 3.Operating Voltage: 3.3V-5V\n4.Output Format : DO digital switching outputs (0 and 1) and AO analog voltage\noutput 5.Has a fixed bolt holes for easy installation 6.PCB Size : 3.2cm \n1.4cm Module Instructions: 1.Photodiode module is most sensitive to\nenvironmental light intensity , generally used for detecting the ambient\nbrightness and light intensity , can be common with photosensitive resistance\nsensor module in most cases , the difference between this two is that\nPhotodiode module has a better directionality, can sense light in fixed\ndirection; 2. When ambient light intensity does not reach the threshold value,\nthe module DO port output high; when the ambient light intensity exceeds a set\nthreshold, the D0 output low; 3.Digital outputs D0 can be directly connected\nwith the microcontroller through the microcontroller to detect high and low ,\nthereby detecting the light intensity changes in the environment; 4. Analog\noutput and the AD conversion process, can achieve higher accuracy. Product\nWiring Instructions: VCC ---- \"+\"GND ---- \"-\"DO ---- TTL Signal Output AO ----\nAnalog Signal Output Package Includes: 10 x Photosensitive Sensor Module\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e1. Using the sensitive type photosensitive resistance sensor\u003c\/li\u003e\n \u003cli\u003e2. The comparator output signal clean waveform is good, driving ability, than 15mA.\u003c\/li\u003e\n \u003cli\u003e3. With adjustable potentiometer can adjust the brightness of the light detected\u003c\/li\u003e\n \u003cli\u003e4. Working voltage 3.3V-5V, the output format: Digital switching output (0 and 1)\u003c\/li\u003e\n \u003cli\u003e5. With bolt holes for easy installation, a small board PCB size: 3.2cm x 1.4cm, using a wide voltage LM393 comparator\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-21T21:02:28+10:00","created_at":"2021-08-21T21:02:28+10:00","vendor":"Gowoops","type":"Photoelectric Sensors","tags":["cocoon"],"price":12800,"price_min":12800,"price_max":12800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40923405320347,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01N1FKS4L","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module for Arduino","public_title":null,"options":["Default Title"],"price":12800,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"705586405439","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B01N1FKS4L.jpg?v=1651365531","\/\/leoforward.com\/cdn\/shop\/products\/51PjiWAR1qL.jpg?v=1629995230","\/\/leoforward.com\/cdn\/shop\/products\/61G899bsrIL.jpg?v=1629995230","\/\/leoforward.com\/cdn\/shop\/products\/51N6s47UjnL.jpg?v=1629995230","\/\/leoforward.com\/cdn\/shop\/products\/61pixLSuESL.jpg?v=1629995230","\/\/leoforward.com\/cdn\/shop\/products\/716VeUzct7L_9710dfa0-ec73-4543-b910-3917f1be0aec.jpg?v=1629995230"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B01N1FKS4L.jpg?v=1651365531","options":["Title"],"media":[{"alt":"Gowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module for Arduino - LeoForward Australia","id":29660603318509,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B01N1FKS4L.jpg?v=1651365531"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B01N1FKS4L.jpg?v=1651365531","width":1080},{"alt":"Gowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module for Arduino - LeoForward Australia","id":24568526405787,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51PjiWAR1qL.jpg?v=1629995230"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51PjiWAR1qL.jpg?v=1629995230","width":1080},{"alt":"Gowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module for Arduino - LeoForward Australia","id":24568526471323,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61G899bsrIL.jpg?v=1629995230"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61G899bsrIL.jpg?v=1629995230","width":1080},{"alt":"Gowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module for Arduino - LeoForward Australia","id":24568526504091,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51N6s47UjnL.jpg?v=1629995230"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51N6s47UjnL.jpg?v=1629995230","width":1080},{"alt":"Gowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module for Arduino - LeoForward Australia","id":24568526569627,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61pixLSuESL.jpg?v=1629995230"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61pixLSuESL.jpg?v=1629995230","width":1001},{"alt":"Gowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module for Arduino - LeoForward Australia","id":24568526602395,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/716VeUzct7L_9710dfa0-ec73-4543-b910-3917f1be0aec.jpg?v=1629995230"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/716VeUzct7L_9710dfa0-ec73-4543-b910-3917f1be0aec.jpg?v=1629995230","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eGowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module for Arduino\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eApplication: Light intensity detection, intelligent car light module, with\ndirectional, only sense light source in front of the sensor, better to use for\nsearching light. Module Features : 1.Can detect the brightness and the ambient\nlight intensity (compared with photo-resistor, this module has better\ndirectionality , can sense light in fixed direction) 2.Adjustable sensitivity\n(use the blue digital potentiometer to adjust) 3.Operating Voltage: 3.3V-5V\n4.Output Format : DO digital switching outputs (0 and 1) and AO analog voltage\noutput 5.Has a fixed bolt holes for easy installation 6.PCB Size : 3.2cm \n1.4cm Module Instructions: 1.Photodiode module is most sensitive to\nenvironmental light intensity , generally used for detecting the ambient\nbrightness and light intensity , can be common with photosensitive resistance\nsensor module in most cases , the difference between this two is that\nPhotodiode module has a better directionality, can sense light in fixed\ndirection; 2. When ambient light intensity does not reach the threshold value,\nthe module DO port output high; when the ambient light intensity exceeds a set\nthreshold, the D0 output low; 3.Digital outputs D0 can be directly connected\nwith the microcontroller through the microcontroller to detect high and low ,\nthereby detecting the light intensity changes in the environment; 4. Analog\noutput and the AD conversion process, can achieve higher accuracy. Product\nWiring Instructions: VCC ---- \"+\"GND ---- \"-\"DO ---- TTL Signal Output AO ----\nAnalog Signal Output Package Includes: 10 x Photosensitive Sensor Module\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e1. Using the sensitive type photosensitive resistance sensor\u003c\/li\u003e\n \u003cli\u003e2. The comparator output signal clean waveform is good, driving ability, than 15mA.\u003c\/li\u003e\n \u003cli\u003e3. With adjustable potentiometer can adjust the brightness of the light detected\u003c\/li\u003e\n \u003cli\u003e4. Working voltage 3.3V-5V, the output format: Digital switching output (0 and 1)\u003c\/li\u003e\n \u003cli\u003e5. With bolt holes for easy installation, a small board PCB size: 3.2cm x 1.4cm, using a wide voltage LM393 comparator\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7891144704237,"title":"Gowoops MEGA 2560 PRO Board Embed CH340G\/ATMEGA2560-16AU Chip with Male pin headers, Compatible for Arduino Mega2560 DIY","handle":"gowoops-mega-2560-pro-board-embed-ch340g-atmega2560-16au-chip-with-male-pin-headers-compatible-for-arduino-mega2560-diy","description":"\u003ch1\u003eGowoops MEGA 2560 PRO Board Embed CH340G\/ATMEGA2560-16AU Chip with Male pin headers, Compatible for Arduino Mega2560 DIY\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eEmbed version of Mega 2560 CH340G\/ATmega2560 - compatible with Arduino Mega\n2560 board. Built on the Atmel ATmega2560 microcontroller and USB-UART\ninterface chip CH340G.Board have compact size 38x55mm. It is good solution, to\nmake your final project on solder proto-board. It is embed board, but the same\nstable, and uses the original chips ATmega2560 (16 MHz).The board used the\nchip CH340G as converter UART-USB. When you work in the frequency 12Mhz,\ngiving a stable result of data exchange (need install drivers to\ncomputer).Mega PRO (Embed) 2560 CH340G \/ ATmega2560 - connects to the computer\nvia microUSB cable (used for almost all Android smartphones).You can supply\npower to board through the MicroUSB connector or to power pinheaders. The\nvoltage regulator (LDO) can deal with incoming voltage from 6V to 9V (peack\n18V) DC. Output current for 5V - about 800mA, for 3.3V - about 800mA (Please\nnote that the higher the input voltage the lower the outgoing current). That\nwill provide a reliable power most of your initial projects.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmbed version of Mega 2560 CH340G\/ATmega2560 - compatible with Arduino Mega 2560 board.\u003c\/li\u003e\n\u003cli\u003eBuilt on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G.\u003c\/li\u003e\n\u003cli\u003eBoard have compact size 38x55mm. It is good solution, to make your final project on solder proto-board.\u003c\/li\u003e\n\u003cli\u003eThe board used the chip CH340G as converter UART-USB.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-14T18:22:36+10:00","created_at":"2022-08-14T18:22:41+10:00","vendor":"Gowoops","type":"Desktop Barebones","tags":["electronics"],"price":12700,"price_min":12700,"price_max":12700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43163664777453,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07Y9P4JL2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gowoops MEGA 2560 PRO Board Embed CH340G\/ATMEGA2560-16AU Chip with Male pin headers, Compatible for Arduino Mega2560 DIY","public_title":null,"options":["Default Title"],"price":12700,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"2019014100","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/71uoEQJc1XL.jpg?v=1660465362","\/\/leoforward.com\/cdn\/shop\/products\/71rfGXLN9LL.jpg?v=1660465362","\/\/leoforward.com\/cdn\/shop\/products\/71rHFBzYuhL.jpg?v=1660465362","\/\/leoforward.com\/cdn\/shop\/products\/71M66BYU79L.jpg?v=1660465362","\/\/leoforward.com\/cdn\/shop\/products\/71rDHSzQZuL.jpg?v=1660465362"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/71uoEQJc1XL.jpg?v=1660465362","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Gowoops MEGA 2560 PRO Board Embed CH340G\/ATMEGA2560-16AU Chip with Male pin headers, Compatible for Arduino Mega2560 DIY","id":30254266351853,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71uoEQJc1XL.jpg?v=1660465362"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71uoEQJc1XL.jpg?v=1660465362","width":1200},{"alt":" [AUSTRALIA] - Gowoops MEGA 2560 PRO Board Embed CH340G\/ATMEGA2560-16AU Chip with Male pin headers, Compatible for Arduino Mega2560 DIY","id":30254266384621,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71rfGXLN9LL.jpg?v=1660465362"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71rfGXLN9LL.jpg?v=1660465362","width":1200},{"alt":" [AUSTRALIA] - Gowoops MEGA 2560 PRO Board Embed CH340G\/ATMEGA2560-16AU Chip with Male pin headers, Compatible for Arduino Mega2560 DIY","id":30254266417389,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71rHFBzYuhL.jpg?v=1660465362"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71rHFBzYuhL.jpg?v=1660465362","width":1200},{"alt":" [AUSTRALIA] - Gowoops MEGA 2560 PRO Board Embed CH340G\/ATMEGA2560-16AU Chip with Male pin headers, Compatible for Arduino Mega2560 DIY","id":30254266450157,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71M66BYU79L.jpg?v=1660465362"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71M66BYU79L.jpg?v=1660465362","width":1200},{"alt":" [AUSTRALIA] - Gowoops MEGA 2560 PRO Board Embed CH340G\/ATMEGA2560-16AU Chip with Male pin headers, Compatible for Arduino Mega2560 DIY","id":30254266482925,"position":5,"preview_image":{"aspect_ratio":0.482,"height":2075,"width":1000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71rDHSzQZuL.jpg?v=1660465362"},"aspect_ratio":0.482,"height":2075,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71rDHSzQZuL.jpg?v=1660465362","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGowoops MEGA 2560 PRO Board Embed CH340G\/ATMEGA2560-16AU Chip with Male pin headers, Compatible for Arduino Mega2560 DIY\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eEmbed version of Mega 2560 CH340G\/ATmega2560 - compatible with Arduino Mega\n2560 board. Built on the Atmel ATmega2560 microcontroller and USB-UART\ninterface chip CH340G.Board have compact size 38x55mm. It is good solution, to\nmake your final project on solder proto-board. It is embed board, but the same\nstable, and uses the original chips ATmega2560 (16 MHz).The board used the\nchip CH340G as converter UART-USB. When you work in the frequency 12Mhz,\ngiving a stable result of data exchange (need install drivers to\ncomputer).Mega PRO (Embed) 2560 CH340G \/ ATmega2560 - connects to the computer\nvia microUSB cable (used for almost all Android smartphones).You can supply\npower to board through the MicroUSB connector or to power pinheaders. The\nvoltage regulator (LDO) can deal with incoming voltage from 6V to 9V (peack\n18V) DC. Output current for 5V - about 800mA, for 3.3V - about 800mA (Please\nnote that the higher the input voltage the lower the outgoing current). That\nwill provide a reliable power most of your initial projects.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmbed version of Mega 2560 CH340G\/ATmega2560 - compatible with Arduino Mega 2560 board.\u003c\/li\u003e\n\u003cli\u003eBuilt on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G.\u003c\/li\u003e\n\u003cli\u003eBoard have compact size 38x55mm. It is good solution, to make your final project on solder proto-board.\u003c\/li\u003e\n\u003cli\u003eThe board used the chip CH340G as converter UART-USB.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":7893484372205,"title":"Gowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","handle":"gowoops-sx1276-lora-radio-wireless-915mhz-uart-serial-module-lorawan-transmitter-receiver-915mhz-3dbi-sma-antenna-compatible-with-arduino-stm32-51-single-chip-microcomputer","description":"\u003ch1\u003eGowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eNotice: If you're not familiar with LoRa wireless module, you'd better to buy\ntwo same frequency modules + antennas as you'll need two to transmit and\nreceive data. Description: E32-900T20D is a 100mW wireless transceiver module,\noperates at 862～930MHz, based on original imported RFIC SX1276 fromSEMTECH.\nThe module adopts LoRa spread-spectrum technology, which means the\ntransmitting distance is much longer than before. Widely used in various\noccasions: Meter Reading, Smart Home, Smart Agriculture, Smart Oil Field,\nIndustrial Wireless Control, Environment Monitor, Temp\/humidity Sensor and\netc. RF Parameter: IC : SX1276 Working Frequency: 862-930MHz (Default: 868MHz)\nMax Transmitting Power: 20dBmReceiving Sensitivity:-123 dBm (Air Data Rate:\n0.3kbps) Air Data Rate: 0.3k~19.2kbps (Default: 2.4kbps) Test distance: 5500\nmeter (In open and clear air, with maximum power, 5dBi antenna gain, height of\n2.5m, Air Data Rate: 2.4kbps) Hardware Parameter: Size: 21 36 mm (Without\nSMA) Antenna Type: SMA-K Communication Interface: UART (Baud rate:\n1200~115200, default: 9600) Buffer: 512 bytes buffer (Automatically sub-\npackaging with 58 bytes per package) Package Includes: 1 x LoRa UART Wireless\nModule(862～930MHz) 1 x LoRa SMA Antenna(862～930MHz)\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoRa spread-spectrum communication, super anti-interference performance -- The module adopts LORA spread spectrum technology, transmitting distance and anti-interference performance are one time more than FSK\u003c\/li\u003e\n\u003cli\u003eWOR (Low Power Consumption) -- Work on radio, applicable for battery powered applications\u003c\/li\u003e\n\u003cli\u003eFEC (Forward Error Correction) -- High coding efficiency \u0026amp; good correction performance\u003c\/li\u003e\n\u003cli\u003eTransparent Transmission (Point to Point) -- Data sending is via transparent transmission, the module comes with address\u003c\/li\u003e\n\u003cli\u003eFixed Transmission -- Each module can connect with other module in different addresses and channels to achieve application like networking, repeating, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-15T17:33:57+10:00","created_at":"2022-08-15T17:34:04+10:00","vendor":"Gowoops","type":"Single Board Computers","tags":["electronics"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43175920107757,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07G7RZLTW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","public_title":null,"options":["Default Title"],"price":12400,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"8541545860","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/616V0J9hWiL.jpg?v=1660548844","\/\/leoforward.com\/cdn\/shop\/products\/81GaxQIInVL.jpg?v=1660548844","\/\/leoforward.com\/cdn\/shop\/products\/81r6y8Vd1kL.jpg?v=1660548844","\/\/leoforward.com\/cdn\/shop\/products\/61Z7Ij4IVqL.jpg?v=1660548845","\/\/leoforward.com\/cdn\/shop\/products\/61wA4Fwo5WL.jpg?v=1660548845","\/\/leoforward.com\/cdn\/shop\/products\/61PqmjHd2mL.jpg?v=1660548845","\/\/leoforward.com\/cdn\/shop\/products\/71faGFeFYzL.jpg?v=1660548845"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/616V0J9hWiL.jpg?v=1660548844","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Gowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260646936813,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1503,"width":1503,"src":"\/\/leoforward.com\/cdn\/shop\/products\/616V0J9hWiL.jpg?v=1660548844"},"aspect_ratio":1.0,"height":1503,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/616V0J9hWiL.jpg?v=1660548844","width":1503},{"alt":" [AUSTRALIA] - Gowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260646969581,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2559,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81GaxQIInVL.jpg?v=1660548844"},"aspect_ratio":1.0,"height":2559,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81GaxQIInVL.jpg?v=1660548844","width":2560},{"alt":" [AUSTRALIA] - Gowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260647002349,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81r6y8Vd1kL.jpg?v=1660548844"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81r6y8Vd1kL.jpg?v=1660548844","width":2560},{"alt":" [AUSTRALIA] - Gowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260647035117,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1504,"width":1504,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61Z7Ij4IVqL.jpg?v=1660548845"},"aspect_ratio":1.0,"height":1504,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61Z7Ij4IVqL.jpg?v=1660548845","width":1504},{"alt":" [AUSTRALIA] - Gowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260647067885,"position":5,"preview_image":{"aspect_ratio":1.001,"height":1503,"width":1504,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61wA4Fwo5WL.jpg?v=1660548845"},"aspect_ratio":1.001,"height":1503,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61wA4Fwo5WL.jpg?v=1660548845","width":1504},{"alt":" [AUSTRALIA] - Gowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260647100653,"position":6,"preview_image":{"aspect_ratio":0.999,"height":1501,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61PqmjHd2mL.jpg?v=1660548845"},"aspect_ratio":0.999,"height":1501,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61PqmjHd2mL.jpg?v=1660548845","width":1500},{"alt":" [AUSTRALIA] - Gowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260647133421,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1504,"width":1504,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71faGFeFYzL.jpg?v=1660548845"},"aspect_ratio":1.0,"height":1504,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71faGFeFYzL.jpg?v=1660548845","width":1504}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGowoops SX1276 LoRa Radio Wireless 915Mhz UART Serial Module LoRaWAN Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eNotice: If you're not familiar with LoRa wireless module, you'd better to buy\ntwo same frequency modules + antennas as you'll need two to transmit and\nreceive data. Description: E32-900T20D is a 100mW wireless transceiver module,\noperates at 862～930MHz, based on original imported RFIC SX1276 fromSEMTECH.\nThe module adopts LoRa spread-spectrum technology, which means the\ntransmitting distance is much longer than before. Widely used in various\noccasions: Meter Reading, Smart Home, Smart Agriculture, Smart Oil Field,\nIndustrial Wireless Control, Environment Monitor, Temp\/humidity Sensor and\netc. RF Parameter: IC : SX1276 Working Frequency: 862-930MHz (Default: 868MHz)\nMax Transmitting Power: 20dBmReceiving Sensitivity:-123 dBm (Air Data Rate:\n0.3kbps) Air Data Rate: 0.3k~19.2kbps (Default: 2.4kbps) Test distance: 5500\nmeter (In open and clear air, with maximum power, 5dBi antenna gain, height of\n2.5m, Air Data Rate: 2.4kbps) Hardware Parameter: Size: 21 36 mm (Without\nSMA) Antenna Type: SMA-K Communication Interface: UART (Baud rate:\n1200~115200, default: 9600) Buffer: 512 bytes buffer (Automatically sub-\npackaging with 58 bytes per package) Package Includes: 1 x LoRa UART Wireless\nModule(862～930MHz) 1 x LoRa SMA Antenna(862～930MHz)\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoRa spread-spectrum communication, super anti-interference performance -- The module adopts LORA spread spectrum technology, transmitting distance and anti-interference performance are one time more than FSK\u003c\/li\u003e\n\u003cli\u003eWOR (Low Power Consumption) -- Work on radio, applicable for battery powered applications\u003c\/li\u003e\n\u003cli\u003eFEC (Forward Error Correction) -- High coding efficiency \u0026amp; good correction performance\u003c\/li\u003e\n\u003cli\u003eTransparent Transmission (Point to Point) -- Data sending is via transparent transmission, the module comes with address\u003c\/li\u003e\n\u003cli\u003eFixed Transmission -- Each module can connect with other module in different addresses and channels to achieve application like networking, repeating, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":7893484896493,"title":"Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","handle":"gowoops-sx1278-lora-radio-wireless-433mhz-uart-serial-module-lorawan-transmitter-receiver-433mhz-3dbi-sma-antenna-compatible-with-arduino-stm32-51-single-chip-microcomputer","description":"\u003ch1\u003eGowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eNotice: If you're not familiar with LoRa wireless module, you'd better to buy\ntwo same frequency modules + antennas as you'll need two to transmit and\nreceive data. Description: E32-433T20DC is a 100mW wireless transceiver\nmodule, operates at 410~441MHz, based on original imported RFIC SX1278\nfromSEMTECH. The module adopts LoRa spread-spectrum technology, which means\nthe transmitting distance is much longer than before. Widely used in various\noccasions: Meter Reading, Smart Home, Smart Agriculture, Smart Oil Field,\nIndustrial Wireless Control, Environment Monitor, Temp\/humidity Sensor and\netc. RF Parameter: IC : SX1278 Working Frequency: 410~441MHz (Default: 433MHz)\nTransmitting Power: 10~20dBm (Default: 20dBm（About 100mW）Receiving\nSensitivity:-130 dBm (Air Data Rate: 0.3kbps) Air Data Rate: 0.3k~19.2kbps\n(Default: 2.4kbps) Test distance: 3000 meter (In open and clear air, with\nmaximum power, 5dBi antenna gain, height of 2m, Air Data Rate: 2.4kbps)\nHardware Parameter: Size: 21 36 mm (Without SMA) Antenna Type: SMA-K\nCommunication Interface: UART (Baud rate: 1200~115200, default: 9600) Buffer:\n512 bytes buffer (Automatically sub-packaging with 58 bytes per package)\nPackage Includes: 1 x LoRa UART Wireless Module(433Mhz) 1 x LoRa SMA\nAntenna(433 Mhz)\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoRa spread-spectrum communication, super anti-interference performance -- The module adopts LORA spread spectrum technology, transmitting distance and anti-interference performance are one time more than FSK\u003c\/li\u003e\n\u003cli\u003eWOR (Low Power Consumption) -- Work on radio, applicable for battery powered applications\u003c\/li\u003e\n\u003cli\u003eFEC (Forward Error Correction) -- High coding efficiency \u0026amp; good correction performance\u003c\/li\u003e\n\u003cli\u003eTransparent Transmission (Point to Point) -- Data sending is via transparent transmission, the module comes with address\u003c\/li\u003e\n\u003cli\u003eFixed Transmission -- Each module can connect with other module in different addresses and channels to achieve application like networking, repeating, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-15T17:34:14+10:00","created_at":"2022-08-15T17:34:22+10:00","vendor":"Gowoops","type":"Single Board Computers","tags":["electronics"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43175924236525,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07G7ZRLQB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","public_title":null,"options":["Default Title"],"price":12400,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"2018005501","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/61aqWfGxuGL.jpg?v=1660548862","\/\/leoforward.com\/cdn\/shop\/products\/61pqfhsbxvL.jpg?v=1660548862","\/\/leoforward.com\/cdn\/shop\/products\/7111-RwEcLL.jpg?v=1660548862","\/\/leoforward.com\/cdn\/shop\/products\/61bWJfaJlrL.jpg?v=1660548862","\/\/leoforward.com\/cdn\/shop\/products\/61wA4Fwo5WL_ee1bab09-2846-4c90-809e-8d8664620a84.jpg?v=1660548862","\/\/leoforward.com\/cdn\/shop\/products\/61nFtvh8OlL.jpg?v=1660548862","\/\/leoforward.com\/cdn\/shop\/products\/71_NoI9gMML.jpg?v=1660548862","\/\/leoforward.com\/cdn\/shop\/products\/61JjpHfV4YL.jpg?v=1660548862"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/61aqWfGxuGL.jpg?v=1660548862","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260649328877,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1504,"width":1504,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61aqWfGxuGL.jpg?v=1660548862"},"aspect_ratio":1.0,"height":1504,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61aqWfGxuGL.jpg?v=1660548862","width":1504},{"alt":" [AUSTRALIA] - Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260649361645,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61pqfhsbxvL.jpg?v=1660548862"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61pqfhsbxvL.jpg?v=1660548862","width":1500},{"alt":" [AUSTRALIA] - Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260649394413,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2188,"width":2188,"src":"\/\/leoforward.com\/cdn\/shop\/products\/7111-RwEcLL.jpg?v=1660548862"},"aspect_ratio":1.0,"height":2188,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/7111-RwEcLL.jpg?v=1660548862","width":2188},{"alt":" [AUSTRALIA] - Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260649427181,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61bWJfaJlrL.jpg?v=1660548862"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61bWJfaJlrL.jpg?v=1660548862","width":1500},{"alt":" [AUSTRALIA] - Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260649459949,"position":5,"preview_image":{"aspect_ratio":1.001,"height":1503,"width":1504,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61wA4Fwo5WL_ee1bab09-2846-4c90-809e-8d8664620a84.jpg?v=1660548862"},"aspect_ratio":1.001,"height":1503,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61wA4Fwo5WL_ee1bab09-2846-4c90-809e-8d8664620a84.jpg?v=1660548862","width":1504},{"alt":" [AUSTRALIA] - Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260649492717,"position":6,"preview_image":{"aspect_ratio":1.001,"height":1503,"width":1504,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61nFtvh8OlL.jpg?v=1660548862"},"aspect_ratio":1.001,"height":1503,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61nFtvh8OlL.jpg?v=1660548862","width":1504},{"alt":" [AUSTRALIA] - Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260649525485,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71_NoI9gMML.jpg?v=1660548862"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71_NoI9gMML.jpg?v=1660548862","width":1500},{"alt":" [AUSTRALIA] - Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer","id":30260649558253,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1401,"width":1401,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61JjpHfV4YL.jpg?v=1660548862"},"aspect_ratio":1.0,"height":1401,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61JjpHfV4YL.jpg?v=1660548862","width":1401}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eNotice: If you're not familiar with LoRa wireless module, you'd better to buy\ntwo same frequency modules + antennas as you'll need two to transmit and\nreceive data. Description: E32-433T20DC is a 100mW wireless transceiver\nmodule, operates at 410~441MHz, based on original imported RFIC SX1278\nfromSEMTECH. The module adopts LoRa spread-spectrum technology, which means\nthe transmitting distance is much longer than before. Widely used in various\noccasions: Meter Reading, Smart Home, Smart Agriculture, Smart Oil Field,\nIndustrial Wireless Control, Environment Monitor, Temp\/humidity Sensor and\netc. RF Parameter: IC : SX1278 Working Frequency: 410~441MHz (Default: 433MHz)\nTransmitting Power: 10~20dBm (Default: 20dBm（About 100mW）Receiving\nSensitivity:-130 dBm (Air Data Rate: 0.3kbps) Air Data Rate: 0.3k~19.2kbps\n(Default: 2.4kbps) Test distance: 3000 meter (In open and clear air, with\nmaximum power, 5dBi antenna gain, height of 2m, Air Data Rate: 2.4kbps)\nHardware Parameter: Size: 21 36 mm (Without SMA) Antenna Type: SMA-K\nCommunication Interface: UART (Baud rate: 1200~115200, default: 9600) Buffer:\n512 bytes buffer (Automatically sub-packaging with 58 bytes per package)\nPackage Includes: 1 x LoRa UART Wireless Module(433Mhz) 1 x LoRa SMA\nAntenna(433 Mhz)\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoRa spread-spectrum communication, super anti-interference performance -- The module adopts LORA spread spectrum technology, transmitting distance and anti-interference performance are one time more than FSK\u003c\/li\u003e\n\u003cli\u003eWOR (Low Power Consumption) -- Work on radio, applicable for battery powered applications\u003c\/li\u003e\n\u003cli\u003eFEC (Forward Error Correction) -- High coding efficiency \u0026amp; good correction performance\u003c\/li\u003e\n\u003cli\u003eTransparent Transmission (Point to Point) -- Data sending is via transparent transmission, the module comes with address\u003c\/li\u003e\n\u003cli\u003eFixed Transmission -- Each module can connect with other module in different addresses and channels to achieve application like networking, repeating, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}