WINGONEER 0.96 inch 80x160 RGB IPS Color 65K Display Screen for Arduino
WINGONEER 0.96 inch 80x160 RGB IPS Color 65K Display Screen for Arduino
Description
Display Resolution: 80 x 160Size: 0.96 inch (RGB) IPSInterface: 4-SPIDriver IC: ST7735SDisplay Color: 65KSupport voltage: 3.3V DCWorking temperature: -20-70 degrees8 pin: GND/ VCC/ SCL/ SDA/ RES/ DC/ CS/ BLKPackage include:1 x Display screen
Features:
- This very small display is only 0.96" diagonal, packed with RGB pixels(with glorious 80x160 pixel color), for making very small high-density displays.
- The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power.
- The ST7735S is a single-chip controller, graphics type TFT-LCD. It consists of 396 source line and 162 gate line driving circuits. This chip is capable of connecting directly to an external microprocessor and accepts Serial Peripheral Interface (SPI), 8-bit/9-bit/16-bit/18-bit parallel interface.
- Display data can be stored in the on-chip display data RAM of 132 x 162 x 18 bits. It can perform display data RAM read/ write operation with no external operation clock to minimize power consumption.