Enter FORWARD5 at Checkout for 5% OFF & Free Shipping in Australia

{"id":6024867610779,"title":"La Crosse Technology 616-146 Color Projection Alarm Clock with Outdoor temperature \u0026 Charging USB port","handle":"la-crosse-technology-616-146-color-projection-alarm-clock-with-outdoor-temperature-charging-usb-port","description":"\u003ch3\u003eLa Crosse Technology 616-146 Color Projection Alarm Clock with Outdoor temperature \u0026amp; Charging USB port\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eWake up to your weather. Accurate atomic time \u0026amp; date\nfeaturing projection onto your ceiling or wall with arm rotation and automatic\nfocus. View your outdoor temperature and\/or alternating time along with alarm\nfeatures and display of indoor temperature (F\/C). Has LCD backlight and\nincludes ac adapter and wireless outdoor temperature sensor that transmits\nwithin 300 ft. First, use name-brand alkaline batteries dated at least 7 years\nin advance. Test the battery voltage to ensure it is at least 1.48 on a\nvoltmeter that reads in numbers Second, Outdoor Temperature Shows Dashes and\nnot syncing A: Dashes means you have lost connection between the display and\nthe outdoor sensor. Batteries are the most common problem. A: Check channels.\nYou may be reading your sensor on a different channel. A: Please confirm that\nthe frequency on the sensor and the frequency on the display are the same.\nThis display is sold with a 433MHz version A: Distance\/Resistance can cause\nloss of sensor signal. Avoid having more than 1 wall, window, tree etc.,\nbetween the display and the sensor. UV coated windows may actually reflect the\nsignal. Stucco walls will absorb the signal. A: You may find it helpful to\norient the Display 90 degrees towards the Thermo sensor for better reception.\nA: Try repositioning your sensor or your display for better reception. A:\nComplete a restart for display with the temperature sensor: • RESTART\nDISTANCE: For best results please bring the outdoor sensor in the house and\nplace 5 feet from the display unit. • REMOVE POWER: Remove batteries from the\nsensor and batteries (and\/or a\/c cord) from the display. •\nDISCHARGEELECTRICITY: With the power removed, press one of the buttons on the\ndisplay at least 20 times to clear all memory. Please do this even if the\ndisplay is blank to remove any random electricity. Verify the display is\nblank. • UNPOWERED FOR 15 MINUTES: It is important with most of our displays\nto remain without power for at least 15 minutes. • NOTE: Failure to allow a\ndisplay to rest for 15 minutes can result in failure to connect with the\noutdoor sensor or missing segment on the display. The instruction manual\ndescribes a setup for a new unit that has not had time to build up residual\nelectricity. • BATTERIES: Please be sure you are using fresh batteries testing\nto a minimum of1.48, on a voltmeter that reads in numbers. • SENSOR FIRST:\nPlace batteries into the outdoor sensor first. Make sure they are installed\naccording to the diagrams in the battery compartment. • DISPLAY NEXT: Install\nbatteries (or a\/c cord) into the display according to the diagram in the\nbattery compartment. CONNECTION: Allow the sensor and display to remain 5 feet\napart for 15 minutes to establish a strong connection. Do not press buttons at\nthis time. You should see a reading on the outdoor temperature area in the\nfirst minute. Transmission range: Up to 200 Feet. Sensor: 2.5 L x 1.42 W x\n3.98 H Inches From the Manufacturer The SET\/°F\/°C button will move through the\nprogram menu. The +\/TEMP or -\/TIME buttons will change a value. 1. WWVB\nON\/OFF: Hold the SET\/°F\/°C button 5 seconds and WWVB and the word ON will\nflash. Press and release the +\/TEMP or -\/TIME button to turn this to OFF if\nyou do not wish WWVB reception. Confirm with the SET\/°F\/°C button and move to\nthe next item. 2. TIME ZONE: EST will flash. Press and release the +\/TEMP or\n-\/TIME button to select a different Time Zone: AST=Atlantic, EST= Eastern,\nCST= Central, MST= Mountain, PST= Pacific, AKT= Alaska, HAT=Hawaiian time\nzone. Confirm with the SET\/°F\/°C button and move to the next item. 3. DAYLIGHT\nSAVING TIME: DST will flash and the word ON. Press and release the +\/TEMP or\n-\/TIME button to turn this to OFF if you do not observe DST. Confirm with the\nSET\/°F\/°C button and move to the next item. 4. 12\/24 HOUR TIME: 12H will\nflash. Press and release the +\/TEMP or -\/TIME button to select 24H. Confirm\nwith the SET\/°F\/°C button and move to the next item. 5. HOUR: The hour will\nflash. Press and release the +\/TEMP or -\/TIME button to select the correct\nhour. Confirm with the SET\/°F\/°C button and move to the next item. 6. MINUTES:\nThe minutes will flash. Press and release the +\/TEMP or -\/TIME button to\nselect the correct minutes. Confirm with the SET\/°F\/°C button and move to the\nnext item. 7. YEAR: The year will flash. Press and release the +\/TEMP or\n-\/TIME button to select the correct year. Confirm with the SET\/°F\/°C button\nand move to the next item. 8. MONTH: The month will flash. Press and release\nthe +\/TEMP or -\/TIME button to select the correct month. Confirm with the\nSET\/°F\/°C button and move to the next item. 9. DATE: The date will flash.\nPress and release the +\/TEMP or -\/TIME button to select the correct date.\nConfirm with the SET\/°F\/°C button and exit the program menu. 10. Note: The Day\nof the Week will SET automatically after the year, month and date are set. 11.\nNote: If no buttons are pressed in a 20-second period the projection alarm\nwill return to a live display reflecting whatever adjustments were made before\nit timed out\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eColor LCD and nighttime backlight\u003c\/li\u003e\n \u003cli\u003eProject time and\/or outdoor temperature on ceiling or wall\u003c\/li\u003e\n \u003cli\u003e90 degree arm rotation,7 time zone settings\u003c\/li\u003e\n \u003cli\u003ePlease refer the User Manual under product description for installation and trouble shooting steps\u003c\/li\u003e\n \u003cli\u003eWireless outdoor temperature and monitors indoor temperature\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2020-12-30T04:00:11+11:00","created_at":"2020-12-30T04:00:11+11:00","vendor":"La Crosse Technology","type":"Alarm Clocks","tags":["deletenow","leo106","sold"],"price":24900,"price_min":24900,"price_max":24900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37447385251995,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0097C41PC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"La Crosse Technology 616-146 Color Projection Alarm Clock with Outdoor temperature \u0026 Charging USB port","public_title":null,"options":["Default Title"],"price":24900,"weight":420,"compare_at_price":null,"inventory_management":null,"barcode":"809188490128","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B0097C41PC.jpg?v=1651113400","\/\/leoforward.com\/cdn\/shop\/products\/71jltjCQSPL.jpg?v=1622926821","\/\/leoforward.com\/cdn\/shop\/products\/71UenMDlOQL.jpg?v=1622926821","\/\/leoforward.com\/cdn\/shop\/products\/81iAEOFJlAL.jpg?v=1622926821"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B0097C41PC.jpg?v=1651113400","options":["Title"],"media":[{"alt":" [AUSTRALIA] - La Crosse Technology 616-146 Color Projection Alarm Clock with Outdoor temperature \u0026 Charging USB port","id":29648413032685,"position":1,"preview_image":{"aspect_ratio":1.278,"height":850,"width":1086,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B0097C41PC.jpg?v=1651113400"},"aspect_ratio":1.278,"height":850,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B0097C41PC.jpg?v=1651113400","width":1086},{"alt":" [AUSTRALIA] - La Crosse Technology 616-146 Color Projection Alarm Clock with Outdoor temperature \u0026 Charging USB port","id":15816669823131,"position":2,"preview_image":{"aspect_ratio":0.979,"height":1400,"width":1371,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71jltjCQSPL.jpg?v=1622926821"},"aspect_ratio":0.979,"height":1400,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71jltjCQSPL.jpg?v=1622926821","width":1371},{"alt":" [AUSTRALIA] - La Crosse Technology 616-146 Color Projection Alarm Clock with Outdoor temperature \u0026 Charging USB port","id":15816669855899,"position":3,"preview_image":{"aspect_ratio":1.376,"height":1090,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71UenMDlOQL.jpg?v=1622926821"},"aspect_ratio":1.376,"height":1090,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71UenMDlOQL.jpg?v=1622926821","width":1500},{"alt":" [AUSTRALIA] - La Crosse Technology 616-146 Color Projection Alarm Clock with Outdoor temperature \u0026 Charging USB port","id":15816669888667,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81iAEOFJlAL.jpg?v=1622926821"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81iAEOFJlAL.jpg?v=1622926821","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eLa Crosse Technology 616-146 Color Projection Alarm Clock with Outdoor temperature \u0026amp; Charging USB port\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eWake up to your weather. Accurate atomic time \u0026amp; date\nfeaturing projection onto your ceiling or wall with arm rotation and automatic\nfocus. View your outdoor temperature and\/or alternating time along with alarm\nfeatures and display of indoor temperature (F\/C). Has LCD backlight and\nincludes ac adapter and wireless outdoor temperature sensor that transmits\nwithin 300 ft. First, use name-brand alkaline batteries dated at least 7 years\nin advance. Test the battery voltage to ensure it is at least 1.48 on a\nvoltmeter that reads in numbers Second, Outdoor Temperature Shows Dashes and\nnot syncing A: Dashes means you have lost connection between the display and\nthe outdoor sensor. Batteries are the most common problem. A: Check channels.\nYou may be reading your sensor on a different channel. A: Please confirm that\nthe frequency on the sensor and the frequency on the display are the same.\nThis display is sold with a 433MHz version A: Distance\/Resistance can cause\nloss of sensor signal. Avoid having more than 1 wall, window, tree etc.,\nbetween the display and the sensor. UV coated windows may actually reflect the\nsignal. Stucco walls will absorb the signal. A: You may find it helpful to\norient the Display 90 degrees towards the Thermo sensor for better reception.\nA: Try repositioning your sensor or your display for better reception. A:\nComplete a restart for display with the temperature sensor: • RESTART\nDISTANCE: For best results please bring the outdoor sensor in the house and\nplace 5 feet from the display unit. • REMOVE POWER: Remove batteries from the\nsensor and batteries (and\/or a\/c cord) from the display. •\nDISCHARGEELECTRICITY: With the power removed, press one of the buttons on the\ndisplay at least 20 times to clear all memory. Please do this even if the\ndisplay is blank to remove any random electricity. Verify the display is\nblank. • UNPOWERED FOR 15 MINUTES: It is important with most of our displays\nto remain without power for at least 15 minutes. • NOTE: Failure to allow a\ndisplay to rest for 15 minutes can result in failure to connect with the\noutdoor sensor or missing segment on the display. The instruction manual\ndescribes a setup for a new unit that has not had time to build up residual\nelectricity. • BATTERIES: Please be sure you are using fresh batteries testing\nto a minimum of1.48, on a voltmeter that reads in numbers. • SENSOR FIRST:\nPlace batteries into the outdoor sensor first. Make sure they are installed\naccording to the diagrams in the battery compartment. • DISPLAY NEXT: Install\nbatteries (or a\/c cord) into the display according to the diagram in the\nbattery compartment. CONNECTION: Allow the sensor and display to remain 5 feet\napart for 15 minutes to establish a strong connection. Do not press buttons at\nthis time. You should see a reading on the outdoor temperature area in the\nfirst minute. Transmission range: Up to 200 Feet. Sensor: 2.5 L x 1.42 W x\n3.98 H Inches From the Manufacturer The SET\/°F\/°C button will move through the\nprogram menu. The +\/TEMP or -\/TIME buttons will change a value. 1. WWVB\nON\/OFF: Hold the SET\/°F\/°C button 5 seconds and WWVB and the word ON will\nflash. Press and release the +\/TEMP or -\/TIME button to turn this to OFF if\nyou do not wish WWVB reception. Confirm with the SET\/°F\/°C button and move to\nthe next item. 2. TIME ZONE: EST will flash. Press and release the +\/TEMP or\n-\/TIME button to select a different Time Zone: AST=Atlantic, EST= Eastern,\nCST= Central, MST= Mountain, PST= Pacific, AKT= Alaska, HAT=Hawaiian time\nzone. Confirm with the SET\/°F\/°C button and move to the next item. 3. DAYLIGHT\nSAVING TIME: DST will flash and the word ON. Press and release the +\/TEMP or\n-\/TIME button to turn this to OFF if you do not observe DST. Confirm with the\nSET\/°F\/°C button and move to the next item. 4. 12\/24 HOUR TIME: 12H will\nflash. Press and release the +\/TEMP or -\/TIME button to select 24H. Confirm\nwith the SET\/°F\/°C button and move to the next item. 5. HOUR: The hour will\nflash. Press and release the +\/TEMP or -\/TIME button to select the correct\nhour. Confirm with the SET\/°F\/°C button and move to the next item. 6. MINUTES:\nThe minutes will flash. Press and release the +\/TEMP or -\/TIME button to\nselect the correct minutes. Confirm with the SET\/°F\/°C button and move to the\nnext item. 7. YEAR: The year will flash. Press and release the +\/TEMP or\n-\/TIME button to select the correct year. Confirm with the SET\/°F\/°C button\nand move to the next item. 8. MONTH: The month will flash. Press and release\nthe +\/TEMP or -\/TIME button to select the correct month. Confirm with the\nSET\/°F\/°C button and move to the next item. 9. DATE: The date will flash.\nPress and release the +\/TEMP or -\/TIME button to select the correct date.\nConfirm with the SET\/°F\/°C button and exit the program menu. 10. Note: The Day\nof the Week will SET automatically after the year, month and date are set. 11.\nNote: If no buttons are pressed in a 20-second period the projection alarm\nwill return to a live display reflecting whatever adjustments were made before\nit timed out\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eColor LCD and nighttime backlight\u003c\/li\u003e\n \u003cli\u003eProject time and\/or outdoor temperature on ceiling or wall\u003c\/li\u003e\n \u003cli\u003e90 degree arm rotation,7 time zone settings\u003c\/li\u003e\n \u003cli\u003ePlease refer the User Manual under product description for installation and trouble shooting steps\u003c\/li\u003e\n \u003cli\u003eWireless outdoor temperature and monitors indoor temperature\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

La Crosse Technology 616-146 Color Projection Alarm Clock with Outdoor temperature & Charging USB port

In Stock. Leaves warehouse within 2 - 3 business days

$249.00 AUD
Maximum quantity available reached.
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

La Crosse Technology 616-146 Color Projection Alarm Clock with Outdoor temperature & Charging USB port

Wake up to your weather. Accurate atomic time & date featuring projection onto your ceiling or wall with arm rotation and automatic focus. View your outdoor temperature and/or alternating time along with alarm features and display of indoor temperature (F/C). Has LCD backlight and includes ac adapter and wireless outdoor temperature sensor that transmits within 300 ft. First, use name-brand alkaline batteries dated at least 7 years in advance. Test the battery voltage to ensure it is at least 1.48 on a voltmeter that reads in numbers Second, Outdoor Temperature Shows Dashes and not syncing A: Dashes means you have lost connection between the display and the outdoor sensor. Batteries are the most common problem. A: Check channels. You may be reading your sensor on a different channel. A: Please confirm that the frequency on the sensor and the frequency on the display are the same. This display is sold with a 433MHz version A: Distance/Resistance can cause loss of sensor signal. Avoid having more than 1 wall, window, tree etc., between the display and the sensor. UV coated windows may actually reflect the signal. Stucco walls will absorb the signal. A: You may find it helpful to orient the Display 90 degrees towards the Thermo sensor for better reception. A: Try repositioning your sensor or your display for better reception. A: Complete a restart for display with the temperature sensor: • RESTART DISTANCE: For best results please bring the outdoor sensor in the house and place 5 feet from the display unit. • REMOVE POWER: Remove batteries from the sensor and batteries (and/or a/c cord) from the display. • DISCHARGEELECTRICITY: With the power removed, press one of the buttons on the display at least 20 times to clear all memory. Please do this even if the display is blank to remove any random electricity. Verify the display is blank. • UNPOWERED FOR 15 MINUTES: It is important with most of our displays to remain without power for at least 15 minutes. • NOTE: Failure to allow a display to rest for 15 minutes can result in failure to connect with the outdoor sensor or missing segment on the display. The instruction manual describes a setup for a new unit that has not had time to build up residual electricity. • BATTERIES: Please be sure you are using fresh batteries testing to a minimum of1.48, on a voltmeter that reads in numbers. • SENSOR FIRST: Place batteries into the outdoor sensor first. Make sure they are installed according to the diagrams in the battery compartment. • DISPLAY NEXT: Install batteries (or a/c cord) into the display according to the diagram in the battery compartment. CONNECTION: Allow the sensor and display to remain 5 feet apart for 15 minutes to establish a strong connection. Do not press buttons at this time. You should see a reading on the outdoor temperature area in the first minute. Transmission range: Up to 200 Feet. Sensor: 2.5 L x 1.42 W x 3.98 H Inches From the Manufacturer The SET/°F/°C button will move through the program menu. The +/TEMP or -/TIME buttons will change a value. 1. WWVB ON/OFF: Hold the SET/°F/°C button 5 seconds and WWVB and the word ON will flash. Press and release the +/TEMP or -/TIME button to turn this to OFF if you do not wish WWVB reception. Confirm with the SET/°F/°C button and move to the next item. 2. TIME ZONE: EST will flash. Press and release the +/TEMP or -/TIME button to select a different Time Zone: AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST= Pacific, AKT= Alaska, HAT=Hawaiian time zone. Confirm with the SET/°F/°C button and move to the next item. 3. DAYLIGHT SAVING TIME: DST will flash and the word ON. Press and release the +/TEMP or -/TIME button to turn this to OFF if you do not observe DST. Confirm with the SET/°F/°C button and move to the next item. 4. 12/24 HOUR TIME: 12H will flash. Press and release the +/TEMP or -/TIME button to select 24H. Confirm with the SET/°F/°C button and move to the next item. 5. HOUR: The hour will flash. Press and release the +/TEMP or -/TIME button to select the correct hour. Confirm with the SET/°F/°C button and move to the next item. 6. MINUTES: The minutes will flash. Press and release the +/TEMP or -/TIME button to select the correct minutes. Confirm with the SET/°F/°C button and move to the next item. 7. YEAR: The year will flash. Press and release the +/TEMP or -/TIME button to select the correct year. Confirm with the SET/°F/°C button and move to the next item. 8. MONTH: The month will flash. Press and release the +/TEMP or -/TIME button to select the correct month. Confirm with the SET/°F/°C button and move to the next item. 9. DATE: The date will flash. Press and release the +/TEMP or -/TIME button to select the correct date. Confirm with the SET/°F/°C button and exit the program menu. 10. Note: The Day of the Week will SET automatically after the year, month and date are set. 11. Note: If no buttons are pressed in a 20-second period the projection alarm will return to a live display reflecting whatever adjustments were made before it timed out

Product Features

  • Color LCD and nighttime backlight
  • Project time and/or outdoor temperature on ceiling or wall
  • 90 degree arm rotation,7 time zone settings
  • Please refer the User Manual under product description for installation and trouble shooting steps
  • Wireless outdoor temperature and monitors indoor temperature

Related Products