Infrared Night Vision IR Camera for Raspberry Pi 4, Pi 3b+ Video Webcam with Case Suits for 3D Printer
Infrared Night Vision IR Camera for Raspberry Pi 4, Pi 3b+ Video Webcam with Case Suits for 3D Printer
Description
Aperture (F): 1.8, Angle of view: 60 degree Focal length: 3.6mm adjustable focal length Fill light infrared band 850NM, shooting distance: 1-2 meters Read more Adjust infrared led sensitivity The working mode of the Led lamp is that when the light is dark, the LED light automatically turns on. When the light is strong, the LED light is automatically turned off. The premise is that the adjustable resistance on the lamp board needs to be adjusted. For the location and location of the use, it is necessary to carry out the operation. Adjustment, if led long-term work, easy to heat, we match heat-sink for led and the case also reserve hole Read more Enable Camera and Command Enter into the RASPBIAN system terminal and execute the following statement to get the system update. “sudo apt-get update” “sudo apt-get upgrade” use raspi-config to configure camera port “sudo raspi-config” select “Interfacing Options” -> “Camera”, enable it and reboot system After connect camera to raspberry pi with cable We can use “raspistill -o image.jpg” to take photo, and use “raspivid -o vido.h264 -t 10000” to take video. (PS. 10000 meaning 10s) Read more Install The Case Please notice after installed, the camera will have a little loose, but it’s does affect your use. When camera compatible with Raspberry Pi 3 B+/Pi 3, use FFC blue & white cable to connect. When compatible with Raspberry Pi Zero, use FPC soft Golden cable to connect. Efficient heat dissipation If led and camera working long time, it’s easy to overheat lead camera burnt out, so we match heat-sink (copper heatsink for camera and aluminum heatsink for led), The led and the case also reserve hole for Heat dissipation At the bottom reserved fixing hole for hold, hole center distance is 21mm, hole diameter is 3mm Effect Comparison Photo The working mode of the Led lamp is that when the light is dark, the LED light automatically turns on. When the light is strong, the LED light automatically turns off. We need to adjust the adjustable resistance on the light board. For the different location, you need to adjust it yourself. Read more Package include: 1 RPI night vision camera 2 Infrared led light 1 set Acrylic holder Case with screws 1 30mm FPC soft golden cable 1 100mm FFC Blue&white cable 1 copper heatsink 2 Aluminum heatsink 1 Screwdriver 1 Tweezers
Features:
- New design Acrylic holder case make sure your pi camera is more stable and flexible, the case reserve the hole for heat-sink, IR led and screws hole, Easy to adjust the filming angle and install the screws
- Compatible with all series, fit for Raspberry pi 4, Pi 3 B+ with 100cm FFC Camera Cable, and match 30cm FPC Cable for Pi Zero, also can works with your 3D printer to observe the Print progress
- HD resolution, the night vision camera is capable of 2592*1944 pixel static images, and also supports 1080P 30fps, 720P 60fps and 640*480P 60/90fps video recording
- Better low light performance, IR corrected lens to reduce focus shift at night, and IR LED illuminator to improve the lightning condition
- Typical usage scenarios, Home security and surveillance, motion detection, 3D printer observe, time-lapse photography and other Raspberry Pi camera projects