Hailege 2pcs OV7670 640x480 0.3Mega 300KP VGA CMOS Camera Module I2C for Arduino ARM FPGA
Hailege 2pcs OV7670 640x480 0.3Mega 300KP VGA CMOS Camera Module I2C for Arduino ARM FPGA
Description
Pin Definition: 3V3-----Input power supply voltage (3.3,5V is recommended but not recommended) GDN-----grounding point SIO_C---Control clock of SCCB interface (Note: Some low-level microcontrollers require pull-upcontrol, similar to I2C interface) SIO_D--- Serial data input (out) side of SCCB interface (Note: Some low-level microcontrollers need pull-up control, similar to I2C interface) VSYNC---frame synchronization signal (output signal) HREF ----Line synchronization signal (output signal) PCLK----pixel clock (output signal) D0-D7---Data port (output signal) RESTE---Reset port (normal use pull up) PWDN----power consumption selection mode (normal use low) For OV7670 with fifo please contact us Key Parameter: (1) Photoreceptor array 640X480; (2) IO voltage 2.5V to 3.0V (internal LDO power supply to the core 1.8V); (3) Power operation 60mW/15fpsVGAYUV; (4) Sleep <20μA; (5) Temperature operation - 30°C to 70°C; (6) Stable operation 0°C to 50°C; (7) Output format (8-bit)? YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data Light (8) Size 1/6" (9) Field of View 25° (10) Maximum rms rate 30fps VGA Sensitivity 1.3V/(Lux-sec); (11) Signal to Noise Ratio 46 dB; (12) Dynamic Range 52dB (13) Browsing mode line by line; (14) Electron exposure 1 line to 510 lines; (15) Pixel area 3.6 μm x 3.6 μm; (16) Dark current 12 mV/s at 60°C; Package Included: 2 OV7670 640x480 0.3Mega 300KP VGA CMOS Camera Module
Features:
- Resolution 640x480 VGA; Power operation 60mW/15fps VGAYUV
- OV7670 640x480 0.3Mega 300KP VGA CMOS Camera Module
- IO voltage 2.5V to 3.0V (internal LDO power supply to the core 1.8V)
- RawRGB, RGB (GRB4:2:2, RGB565/555/444), YUV(4:2:2) and YCbCr(4:2:2) output formats