Digital Converter Module, 1-3KHZ 0-10V PWM Signal to Voltage Converter Module Digital Analog Board
Digital Converter Module, 1-3 kHZ 0-10 V PWM Signal to Voltage Converter Module Digital Analog Board
Specification: Condition: 100% new and high quality Current: Max. 12 mA input voltage: 12-30 V. Dimensions: approx. 5 x 4.5 cm. Weight: 20g Quantity: 1 piece. Usage method: PWM signal input frequency range: 1kHZ-3kHZ PWM signal input level range: 4.5V to 10V peak to peak level, jumper inserted at 5V. This type signal mainly for conventional industrial control card (such as for MACH3 board), for 5V the CPU interface. 12 to 24 V peak to peak level, jumper inserted at 24 V. This type signal mainly for conventional PLC interface 0-10V analog voltage output explanation: When the signal input is not connected, the output gives 0V. When we turn on this module for the first time, we calibrate it better: find a 50% duty Ratio signal, connect DIN-, DIN+, the amplitude corresponds to the corresponding jumper. If the frequency is 1kHz ~ 3kHz, use a multimeter to test AO, GND. The meter should show around 5.4V. We adjust the potentiometer on the converter module by several meters shows about 5.4 V. After that, we have calibrated and tuned pulse signal with this converter module. The module has a definition of 0.1V. Output current 10mA If duty ratio vs voltage, we can choose PWM output pin STEP LOW/ACTIVE for MACH3 software. Packaging includes: 1 x PWM signal to voltage converter Note: When there is no input signal, the output is 0V. It is only output when there is input.
Product Features
- PWM converts digital signals into an analog signal (0 to 10 V).
- Digital input signal can be 5 V or 24 V Level 0-100% PWM signal.
- Analog output signal can be 0-10V voltage or 0-5V voltage.
- Can be used for industrial control panel PLC or other signal interface switching.
- This module is simple to be wired and convenient to use.