BEYIMEI mSATA to M.2 NGFF SSD B-Key Adapter Card,Connects M.2 NGFF SATA Solid State Disk to Mini SATA Motherboard,Supports M.2 NGFF 2280, 2260, 2242, 2230(NOT Support NVME SSD) Green-mSATA to M.2 Adapter Card
BEYIMEI mSATA to M.2 NGFF SSD B-Key Adapter Card,Connects M.2 NGFF SATA Solid State Disk to Mini SATA Motherboard,Supports M.2 NGFF 2280, 2260, 2242, 2230(NOT Support NVME SSD)
Description
This adapter card is to convert msata slot on motherboard to M.2 NGFF SSDslotYou can connect your M.2 NGFF B-Key SSD to mSATA motherboardfor data transfer. (Note: SSD is not included in this project)Features: Make M.2 SSD available for notebooks or desktops with only MSATA slotSpecification:Supports data transfer up to 6GbpsCompliant with PCI Express M.2 Specification 1.0.Compliant with SATA3.0 specification.2230, 2242, 2260 and 2280 size NGFF SSDs are supported.4 screws can be used to fix NGFF SSDPlease note:⚡It only supports M.2 NGFF SATA protocol SSD (B-KEY, B/M-KEY). It doesn't support M-KEY, it doesn't support NVME and PCI-E SSD.⚡The adapter card only connects the signal from the MSATA socket to the M.2 KEY-B connector, so the adapter card does not need a driver.⚡Please shut down before use. After installation, please confirm that the riser card has been connected and then turn it on.⚡If the hard disk is not recognized, please check whether it is a MINI SATA interface.Note: Because the SATA1 interface of the Intel DN2800MT motherboard shares the same signal with its MSATA slot, this riser card cannot be used.Package:1mSATA to M.2 NGFF Adapter Card4Screw
Features:
- mSATA to M.2 NGFF: This adapter card can convert the mSATA slot of the motherboard into an M.2 NGFF B-KEY/B+M-KEY interface and connect it to the computer host for data transmission.Supports data transfer up to 6Gbps.
- This adapter card only connects the signal from the motherboard's MSATA socket to the M.2 B-KEY connector, so no driver is required.
- Support M.2 NGFF SSD size: 22*30mm, 22*42mm, 22*60mm, 22*80mm. You can break and position it according to the length of the card slot inside your machine.
- Before installation, please make sure that the machine is powered off. After installation, please confirm that the riser card has been connected before turning on the machine.