AIMPGSTL PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Suitable for Signal Interface Switching for PLC or Other Industrial Control PWM-to-Voltage 0-10V
AIMPGSTL PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Suitable for Signal Interface Switching for PLC or Other Industrial Control PWM-to-Voltage 0-10V
Description
Product description The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals. Sepcificattion: Work Voltage: DC 12V-30V; (more than 100MA) PWM Receiver Frequency: 1KHZ-3KHZ PWM signal input level range: The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller Conversion range: 0%-100% PWM to 0-10V Allowable error: 5% Feature: MCU embedded technology Easy to operate, fine- tuned by potentiometer Select the PWM signal input level range through short- circuit The module is smaller, easy to carry and use Hardware Interface: VCC: Power supply 12V ~ 30V. GND: Power supply ground. PWM: PWM input signal positive. GND: the input signal negative terminal. VOUT: Output voltage 0 ~ 10V. GND: output voltage ground. Package include 1 x PWM to Voltage Module
Features:
- Embedded microcontroller technology. Easy to operate, you can fine-tune the potentiometer.
- Take the PWM signal input level range by short-circuiting.
- Module Working voltage: DC12V ~ 30V (Power Requirements: greater than 100mA),
- PWM signal receiving frequency range: 1KHz ~ 3KHz.
- Voltage-to-PWM module able to convert an analog signal 0-5V / 0-10V signal into the digital PWM PLC can be used for industrial control panel or other signal interface switching, by adjusting the voltage to regulate the PWM duty cycle.