Geekworm

{"id":7059931496603,"title":"2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026 N100","handle":"2pcs-wifi-antenna-6dbi-ipex-mhf4-to-rp-sma-female-extension-cable-2-4ghz-5-8ghz-dual-band-for-nvidia-jetson-xavier-nx-developer-kit-m-2-ngff-card-n100","description":"\u003ch3\u003e2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026amp; N100\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e[Overview] This is a 6dBi WiFi Antenna with IPEX MHF4 to\nRP SMA Female Extension Cable which can be used for NVIDIA Jetson Xavier NX\ndeveloper kit. To use this WiFi antenna with Jetson Xavier NX , it need to\nremove the buttom holder of NVIDIA Jetson Xavier NX. The Geekworm N100 case\ncan also be used for install the NVIDIA Jetson Xavier NX developer kit, but\nyou will need these extra 2pcs WiFi Antenna with IPEX MHF4 to RP SMA Female\nExtension Cable. To use this WiFi antenna, it need to remove the buttom holder\nof NVIDIA Jetson Xavier NX. [Key Features] Antenna Information6 dBi WiFi\nAntennaFrequency: 2.4GHz, 5.8GHzLength of Antenna: 6.69 inch(17cm)SMA Type of\nAntenna: RP-SMA Male(Hole in Center) U.FL Cable InformationU.FL Type: MHF4\nIPEX for M.2(NGFF) InterfaceSMA Type: RP-SMA Female(Pin in Center)Length: 5.7\ninch(14.5cm)Diameter: 0.84mm [Packing List] 2 x 6dBi RP-SMA male (Hole in\nCenter) Antenna for 2.4GHz 5.8GHz. 6.69 inch(17cm)2 x M.2(NGFF) U.FL to RP-SMA\nFemale connector cable. 5.7 inch(14.5cm) Dimensions Details Read more\nApplication\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e6 dBi WiFi Antenna,Frequency: 2.4GHz, 5.8GHz; Length of Antenna: 6.69 inch(17cm); SMA Type of Antenna: RP-SMA Male(Hole in Center)\u003c\/li\u003e\n \u003cli\u003eU.FL Type: MHF4 IPEX for M.2(NGFF) Interface; SMA Type: RP-SMA Female(Pin in Center); Length: 5.7 inch(14.5cm); Diameter: 0.84mm\u003c\/li\u003e\n \u003cli\u003e[Packing List] 2 x 6dBi RP-SMA male (Hole in Center) Antenna for 2.4GHz 5.8GHz. 6.69 inch(17cm); 2 x M.2(NGFF) U.FL to RP-SMA Female connector cable. 5.7 inch(14.5cm)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-09-12T01:08:56+10:00","created_at":"2021-09-12T01:08:56+10:00","vendor":"Geekworm","type":"Network Antennas","tags":["cocoon","deletenow"],"price":11100,"price_min":11100,"price_max":11100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41111165010075,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B089XZQPWS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026 N100","public_title":null,"options":["Default Title"],"price":11100,"weight":50,"compare_at_price":null,"inventory_management":null,"barcode":"041814175140","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B089XZQPWS.jpg?v=1651435531","\/\/leoforward.com\/cdn\/shop\/products\/61MMiGtysuL.jpg?v=1631431555","\/\/leoforward.com\/cdn\/shop\/products\/71_c0WGGjDL.jpg?v=1631431555","\/\/leoforward.com\/cdn\/shop\/products\/71JOSuFv2gL.jpg?v=1631431555","\/\/leoforward.com\/cdn\/shop\/products\/51E8ceHQN5L.jpg?v=1631431555","\/\/leoforward.com\/cdn\/shop\/products\/51vfomwWhZL.jpg?v=1631431555","\/\/leoforward.com\/cdn\/shop\/products\/61fakepvg7L.jpg?v=1631431555","\/\/leoforward.com\/cdn\/shop\/products\/614-U_hO9pL.jpg?v=1631431555"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B089XZQPWS.jpg?v=1651435531","options":["Title"],"media":[{"alt":"2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026 N100 - LeoForward Australia","id":29662516281581,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B089XZQPWS.jpg?v=1651435531"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B089XZQPWS.jpg?v=1651435531","width":1500},{"alt":"2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026 N100 - LeoForward Australia","id":24844603031707,"position":2,"preview_image":{"aspect_ratio":1.001,"height":1499,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61MMiGtysuL.jpg?v=1631431555"},"aspect_ratio":1.001,"height":1499,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61MMiGtysuL.jpg?v=1631431555","width":1500},{"alt":"2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026 N100 - LeoForward Australia","id":24844603064475,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71_c0WGGjDL.jpg?v=1631431555"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71_c0WGGjDL.jpg?v=1631431555","width":1500},{"alt":"2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026 N100 - LeoForward Australia","id":24844603097243,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71JOSuFv2gL.jpg?v=1631431555"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71JOSuFv2gL.jpg?v=1631431555","width":1500},{"alt":"2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026 N100 - LeoForward Australia","id":24844603130011,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51E8ceHQN5L.jpg?v=1631431555"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51E8ceHQN5L.jpg?v=1631431555","width":1500},{"alt":"2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026 N100 - LeoForward Australia","id":24844603162779,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51vfomwWhZL.jpg?v=1631431555"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51vfomwWhZL.jpg?v=1631431555","width":1500},{"alt":"2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026 N100 - LeoForward Australia","id":24844603195547,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61fakepvg7L.jpg?v=1631431555"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61fakepvg7L.jpg?v=1631431555","width":1500},{"alt":"2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026 N100 - LeoForward Australia","id":24844603228315,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/614-U_hO9pL.jpg?v=1631431555"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/614-U_hO9pL.jpg?v=1631431555","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e2pcs WiFi Antenna 6dBi IPEX MHF4 to RP SMA Female Extension Cable 2.4Ghz 5.8Ghz Dual Band for NVIDIA Jetson Xavier NX Developer Kit M.2 NGFF Card \u0026amp; N100\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e[Overview] This is a 6dBi WiFi Antenna with IPEX MHF4 to\nRP SMA Female Extension Cable which can be used for NVIDIA Jetson Xavier NX\ndeveloper kit. To use this WiFi antenna with Jetson Xavier NX , it need to\nremove the buttom holder of NVIDIA Jetson Xavier NX. The Geekworm N100 case\ncan also be used for install the NVIDIA Jetson Xavier NX developer kit, but\nyou will need these extra 2pcs WiFi Antenna with IPEX MHF4 to RP SMA Female\nExtension Cable. To use this WiFi antenna, it need to remove the buttom holder\nof NVIDIA Jetson Xavier NX. [Key Features] Antenna Information6 dBi WiFi\nAntennaFrequency: 2.4GHz, 5.8GHzLength of Antenna: 6.69 inch(17cm)SMA Type of\nAntenna: RP-SMA Male(Hole in Center) U.FL Cable InformationU.FL Type: MHF4\nIPEX for M.2(NGFF) InterfaceSMA Type: RP-SMA Female(Pin in Center)Length: 5.7\ninch(14.5cm)Diameter: 0.84mm [Packing List] 2 x 6dBi RP-SMA male (Hole in\nCenter) Antenna for 2.4GHz 5.8GHz. 6.69 inch(17cm)2 x M.2(NGFF) U.FL to RP-SMA\nFemale connector cable. 5.7 inch(14.5cm) Dimensions Details Read more\nApplication\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e6 dBi WiFi Antenna,Frequency: 2.4GHz, 5.8GHz; Length of Antenna: 6.69 inch(17cm); SMA Type of Antenna: RP-SMA Male(Hole in Center)\u003c\/li\u003e\n \u003cli\u003eU.FL Type: MHF4 IPEX for M.2(NGFF) Interface; SMA Type: RP-SMA Female(Pin in Center); Length: 5.7 inch(14.5cm); Diameter: 0.84mm\u003c\/li\u003e\n \u003cli\u003e[Packing List] 2 x 6dBi RP-SMA male (Hole in Center) Antenna for 2.4GHz 5.8GHz. 6.69 inch(17cm); 2 x M.2(NGFF) U.FL to RP-SMA Female connector cable. 5.7 inch(14.5cm)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":7023949906075,"title":"Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard","handle":"geekworm-12mm-aluminum-alloy-heatsink-c235-support-30mm-cooling-fan-compatible-with-raspberry-pi-compute-module-4-cm4-motherboard","description":"\u003ch3\u003eGeekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e[Overview] Geekworm design this 12mm embedded armor\naluminum alloy heatsink to slove its heat generation problem for the Raspberry\nPi Compute Module 4 CM4, This heatsink can also be used with a 30mm cooling\nfan above. [Key Features] Compatible with Raspberry Pi Compute Module 4 CM4\nMotherboardHigh quality embedded Armor Aluminum Alloy Heatsink Supports to\ninstall a 30mm fan to get more cooling down, you can use 3007 or 3010 cooling\nfan.Heatsink dimensions: 54x39x12mm\/2.12x1.53x0.47inch; Net weight: 30g\/0.07lb\nApplication Note: the Raspberry Pi Compute Module 4 CM4 Motherboard and the IO\nexpansion board are not included in the packing list. Cut proper thermal pad\nto attach on the CPU of CM4 module FAQ We get the feedback maybe related with\nthe individual heatsink that use the one piece thermal pad still have gap\nbetween the CM4 module and the C235 heatsink, if you meet such a situation,\nplease cut the thermal pad into two pcs and attach 2pcs of thermal pads\nstacked to attch on the CPU of CM4 module. [Packing List] 1x 12mm aluminum\nalloy heatsink for CM44x PM2.5x16mm Screws4x M2.5 Nuts1x Thermal Tape(attach\non the CPU of CM4) Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eGeekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4; User manual, refer to Geekworm WiKi search C235.\u003c\/li\u003e\n \u003cli\u003eHeatsink dimensions: 54x39x12mm\/2.12x1.53x0.47inch; Net weight: 30g\/0.07lb\u003c\/li\u003e\n \u003cli\u003eSupport install 30mm (3007 or 3010) cooling fan above the heatsink\u003c\/li\u003e\n \u003cli\u003eWith one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4\u003c\/li\u003e\n \u003cli\u003eThe C235 heatsink reserve the space to connect the extermal antenna for CM4.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2021-08-27T16:31:04+10:00","created_at":"2021-08-27T16:31:04+10:00","vendor":"Geekworm","type":"Heatsinks","tags":["cocoon"],"price":10100,"price_min":10100,"price_max":10100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40983372464283,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B08PZ39L46","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard","public_title":null,"options":["Default Title"],"price":10100,"weight":43,"compare_at_price":null,"inventory_management":null,"barcode":"721821899580","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B08PZ39L46.jpg?v=1651391559","\/\/leoforward.com\/cdn\/shop\/products\/71YIpHLJblL.jpg?v=1632414742","\/\/leoforward.com\/cdn\/shop\/products\/71m9ipkmMbL.jpg?v=1632414742","\/\/leoforward.com\/cdn\/shop\/products\/61UkIFGWpLL.jpg?v=1632414742","\/\/leoforward.com\/cdn\/shop\/products\/71R_t7tPzpL.jpg?v=1632414742","\/\/leoforward.com\/cdn\/shop\/products\/71wJPWkTb-L.jpg?v=1632414742","\/\/leoforward.com\/cdn\/shop\/products\/71uDcXmKNkL.jpg?v=1632414742","\/\/leoforward.com\/cdn\/shop\/products\/61b0YrHIXBL.jpg?v=1632414742"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B08PZ39L46.jpg?v=1651391559","options":["Title"],"media":[{"alt":"Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard - LeoForward Australia","id":29661347578093,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B08PZ39L46.jpg?v=1651391559"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B08PZ39L46.jpg?v=1651391559","width":1600},{"alt":"Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard - LeoForward Australia","id":24646795559067,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71YIpHLJblL.jpg?v=1632414742"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71YIpHLJblL.jpg?v=1632414742","width":1600},{"alt":"Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard - LeoForward Australia","id":24646795591835,"position":3,"preview_image":{"aspect_ratio":1.617,"height":1488,"width":2406,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71m9ipkmMbL.jpg?v=1632414742"},"aspect_ratio":1.617,"height":1488,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71m9ipkmMbL.jpg?v=1632414742","width":2406},{"alt":"Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard - LeoForward Australia","id":24646795624603,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61UkIFGWpLL.jpg?v=1632414742"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61UkIFGWpLL.jpg?v=1632414742","width":1600},{"alt":"Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard - LeoForward Australia","id":24646795657371,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71R_t7tPzpL.jpg?v=1632414742"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71R_t7tPzpL.jpg?v=1632414742","width":1600},{"alt":"Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard - LeoForward Australia","id":24646795690139,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71wJPWkTb-L.jpg?v=1632414742"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71wJPWkTb-L.jpg?v=1632414742","width":1600},{"alt":"Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard - LeoForward Australia","id":24646795722907,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71uDcXmKNkL.jpg?v=1632414742"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71uDcXmKNkL.jpg?v=1632414742","width":1600},{"alt":"Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard - LeoForward Australia","id":24646795755675,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61b0YrHIXBL.jpg?v=1632414742"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61b0YrHIXBL.jpg?v=1632414742","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eGeekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e[Overview] Geekworm design this 12mm embedded armor\naluminum alloy heatsink to slove its heat generation problem for the Raspberry\nPi Compute Module 4 CM4, This heatsink can also be used with a 30mm cooling\nfan above. [Key Features] Compatible with Raspberry Pi Compute Module 4 CM4\nMotherboardHigh quality embedded Armor Aluminum Alloy Heatsink Supports to\ninstall a 30mm fan to get more cooling down, you can use 3007 or 3010 cooling\nfan.Heatsink dimensions: 54x39x12mm\/2.12x1.53x0.47inch; Net weight: 30g\/0.07lb\nApplication Note: the Raspberry Pi Compute Module 4 CM4 Motherboard and the IO\nexpansion board are not included in the packing list. Cut proper thermal pad\nto attach on the CPU of CM4 module FAQ We get the feedback maybe related with\nthe individual heatsink that use the one piece thermal pad still have gap\nbetween the CM4 module and the C235 heatsink, if you meet such a situation,\nplease cut the thermal pad into two pcs and attach 2pcs of thermal pads\nstacked to attch on the CPU of CM4 module. [Packing List] 1x 12mm aluminum\nalloy heatsink for CM44x PM2.5x16mm Screws4x M2.5 Nuts1x Thermal Tape(attach\non the CPU of CM4) Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eGeekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4; User manual, refer to Geekworm WiKi search C235.\u003c\/li\u003e\n \u003cli\u003eHeatsink dimensions: 54x39x12mm\/2.12x1.53x0.47inch; Net weight: 30g\/0.07lb\u003c\/li\u003e\n \u003cli\u003eSupport install 30mm (3007 or 3010) cooling fan above the heatsink\u003c\/li\u003e\n \u003cli\u003eWith one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4\u003c\/li\u003e\n \u003cli\u003eThe C235 heatsink reserve the space to connect the extermal antenna for CM4.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}

{"id":8449878163693,"title":"Geekworm 12V 5A 60W power supply | AC 100-240V | DC 5.5*2.1mm | 3D printers\/surveillance cameras\/audio amplifiers\/Raspberry Pi X735 V3.0\/ X880\/ X832 \/ NASPi Gemini 2.5 V2.0","handle":"geekworm-12v-5a-60w-power-supply-ac-100-240v-dc-5-5-2-1mm-3d-printers-surveillance-cameras-audio-amplifiers-raspberry-pi-x735-v3-0-x880-x832-naspi-gemini-2-5-v2-0","description":"\u003ch3\u003eGeekworm 12V 5A 60W power supply | AC 100-240V | DC 5.5*2.1mm | 3D printers\/surveillance cameras\/audio amplifiers\/Raspberry Pi X735 V3.0\/ ul class=\"a\"\u0026gt; \u003c\/h3\u003e\u003cli\u003e60W 12V 5A power supply input: 100-240V 50\/60Hz 1.2A max.; Output: 12V max. 5A 60W\u003c\/li\u003e \u003cli\u003eDimension 88 x 46 x 70 mm \/ 3.46 x 1.81 x 2.75, cable length: 1.2 m \/ 47.24 inches; Output adapter jack size: 5.5 x 2.1 mm\u003c\/li\u003e \u003cli\u003eSafety protection CE certified; Overvoltage protection; undervoltage protection; over-temperature protection; overcurrent protection; Short circuit protection\u003c\/li\u003e \u003cli\u003eApplicationCompatible with Raspberry Pi X735 v3.0 \/ X880 \/ X832 \/ NASPi Gemini 2.5 V2.0. It can also be used for 3D printers, surveillance cameras, audio amplifiers, etc. For indoor use only!\u003c\/li\u003e \u003cli\u003ePacking list 1x power supply with EU plug\u003c\/li\u003e ","published_at":"2024-03-07T03:25:41+11:00","created_at":"2024-03-07T03:25:50+11:00","vendor":"Geekworm","type":"Industrial power supply","tags":["industryDE"],"price":19100,"price_min":19100,"price_max":19100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45346581020909,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"de-B0BD81W6SN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm 12V 5A 60W power supply | AC 100-240V | DC 5.5*2.1mm | 3D printers\/surveillance cameras\/audio amplifiers\/Raspberry Pi X735 V3.0\/ X880\/ X832 \/ NASPi Gemini 2.5 V2.0","public_title":null,"options":["Default Title"],"price":19100,"weight":700,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/61vgqIWzSML.jpg?v=1709742350","\/\/leoforward.com\/cdn\/shop\/products\/71l2jKifl3L.jpg?v=1709742350","\/\/leoforward.com\/cdn\/shop\/products\/71brKim31ZL.jpg?v=1709742350","\/\/leoforward.com\/cdn\/shop\/products\/61SR6JOHFXL.jpg?v=1709742350","\/\/leoforward.com\/cdn\/shop\/products\/61Ls1UzgHSL.jpg?v=1709742350","\/\/leoforward.com\/cdn\/shop\/products\/71pVEp09FdL.jpg?v=1709742350"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/61vgqIWzSML.jpg?v=1709742350","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Geekworm 12V 5A 60W power supply | AC 100-240V | DC 5.5*2.1mm | 3D printers\/surveillance cameras\/audio amplifiers\/Raspberry Pi X735 V3.0\/ X880\/ X832 \/ NASPi Gemini 2.5 V2.0","id":32554632577261,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61vgqIWzSML.jpg?v=1709742350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61vgqIWzSML.jpg?v=1709742350","width":2000},{"alt":" [AUSTRALIA] - Geekworm 12V 5A 60W power supply | AC 100-240V | DC 5.5*2.1mm | 3D printers\/surveillance cameras\/audio amplifiers\/Raspberry Pi X735 V3.0\/ X880\/ X832 \/ NASPi Gemini 2.5 V2.0","id":32554632610029,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71l2jKifl3L.jpg?v=1709742350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71l2jKifl3L.jpg?v=1709742350","width":2000},{"alt":" [AUSTRALIA] - Geekworm 12V 5A 60W power supply | AC 100-240V | DC 5.5*2.1mm | 3D printers\/surveillance cameras\/audio amplifiers\/Raspberry Pi X735 V3.0\/ X880\/ X832 \/ NASPi Gemini 2.5 V2.0","id":32554632642797,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71brKim31ZL.jpg?v=1709742350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71brKim31ZL.jpg?v=1709742350","width":2000},{"alt":" [AUSTRALIA] - Geekworm 12V 5A 60W power supply | AC 100-240V | DC 5.5*2.1mm | 3D printers\/surveillance cameras\/audio amplifiers\/Raspberry Pi X735 V3.0\/ X880\/ X832 \/ NASPi Gemini 2.5 V2.0","id":32554632675565,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61SR6JOHFXL.jpg?v=1709742350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61SR6JOHFXL.jpg?v=1709742350","width":2000},{"alt":" [AUSTRALIA] - Geekworm 12V 5A 60W power supply | AC 100-240V | DC 5.5*2.1mm | 3D printers\/surveillance cameras\/audio amplifiers\/Raspberry Pi X735 V3.0\/ X880\/ X832 \/ NASPi Gemini 2.5 V2.0","id":32554632708333,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61Ls1UzgHSL.jpg?v=1709742350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61Ls1UzgHSL.jpg?v=1709742350","width":2000},{"alt":" [AUSTRALIA] - Geekworm 12V 5A 60W power supply | AC 100-240V | DC 5.5*2.1mm | 3D printers\/surveillance cameras\/audio amplifiers\/Raspberry Pi X735 V3.0\/ X880\/ X832 \/ NASPi Gemini 2.5 V2.0","id":32554632741101,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71pVEp09FdL.jpg?v=1709742350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71pVEp09FdL.jpg?v=1709742350","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eGeekworm 12V 5A 60W power supply | AC 100-240V | DC 5.5*2.1mm | 3D printers\/surveillance cameras\/audio amplifiers\/Raspberry Pi X735 V3.0\/ ul class=\"a\"\u0026gt; \u003c\/h3\u003e\u003cli\u003e60W 12V 5A power supply input: 100-240V 50\/60Hz 1.2A max.; Output: 12V max. 5A 60W\u003c\/li\u003e \u003cli\u003eDimension 88 x 46 x 70 mm \/ 3.46 x 1.81 x 2.75, cable length: 1.2 m \/ 47.24 inches; Output adapter jack size: 5.5 x 2.1 mm\u003c\/li\u003e \u003cli\u003eSafety protection CE certified; Overvoltage protection; undervoltage protection; over-temperature protection; overcurrent protection; Short circuit protection\u003c\/li\u003e \u003cli\u003eApplicationCompatible with Raspberry Pi X735 v3.0 \/ X880 \/ X832 \/ NASPi Gemini 2.5 V2.0. It can also be used for 3D printers, surveillance cameras, audio amplifiers, etc. For indoor use only!\u003c\/li\u003e \u003cli\u003ePacking list 1x power supply with EU plug\u003c\/li\u003e "}

{"id":7912734818541,"title":"Geekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack","handle":"geekworm-2x20-40-pin-stacking-female-header-kit-for-raspberry-pi-4b-3b-3b-2b-b-a-zero-w-zero-2-w5-specifications-10pcs-raspberry-pi-gpio-stacking-header-extender-raspberry-pi-pico-header-pack","description":"\u003ch1\u003eGeekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003e[Overview] This gpio headers kit includes 4 types of pin\nheaders you need during the raspberry pi project, including 2pcs 2x20 Female\nHeader, 2pcs 2x20 Female Header, 2pcs 2x20 Female Header,2ps 2x20 Pin Header,\nstored in a transparent plastic box to meets most of your needs in one kit.\nAll headers are 2.54mm pitch, you can use this raspberry pi gpio extender for\nthe newest Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+, Raspberry Pi 3\nModel B, Pi 2B\/B+\/A+. And the 2x20 Pin Header is for Raspberry Pi Zero \/ Zero\nW\/Zero 2W. [Specification] Material: Insulated plastic, hard metal pinNumber\nof Pins: 220Pin (2.54mm pitch)Row Type: double rowGender of Connector:\nFemalePin length: please refer to the packing list and photo show.Application:\nWidely be used in Raspberry Pi DIY project, such as for electronic circuit,\nPCB circuit board etc. electronic project [Packing List] 2 2x20 Female\nHeader (Pin Len: 12mm)2 2x20 Female Header (Pin Len: 10.7mm)2 2x20 Female\nHeader (Pin Len: 5.5mm)2 2x20 Pin Header\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePacking List: 2 * 2x20 Female Header (Pin Len: 12mm), 2 * 2x20 Female Header (Pin Len: 10.7mm), 2 * 2x20 Female Header (Pin Len: 5.5mm), 2 * 2x20 Pin Header\u003c\/li\u003e\n\u003cli\u003eThe 2x20 Pin Header is for Raspberry Pi Zero \/ Zero W\/ Zero 2 W.\u003c\/li\u003e\n\u003cli\u003eMaterial: Insulated plastic, hard metal pin\u003c\/li\u003e\n\u003cli\u003eApplication: Widely be used in Raspberry Pi DIY project, such as for electronic circuit, PCB circuit board etc. electronic project\u003c\/li\u003e\n\u003cli\u003eStacking header for Raspberry Pi 4, Pi 3, Pi 2, Pi Model B+, Pi A+, Pi Zero, Pi Zero W\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-28T06:16:07+10:00","created_at":"2022-08-28T06:16:15+10:00","vendor":"Geekworm","type":"Single Board Computers","tags":["electronics"],"price":8800,"price_min":8800,"price_max":8800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43258698662125,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0827THC7R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack","public_title":null,"options":["Default Title"],"price":8800,"weight":53,"compare_at_price":null,"inventory_management":null,"barcode":"100182-TB","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/61gcQUFzbbL.jpg?v=1661631375","\/\/leoforward.com\/cdn\/shop\/products\/61hBuoUNpcL.jpg?v=1661631375","\/\/leoforward.com\/cdn\/shop\/products\/61znZTHdGIL.jpg?v=1661631375","\/\/leoforward.com\/cdn\/shop\/products\/61VeOddpoSL.jpg?v=1661631375","\/\/leoforward.com\/cdn\/shop\/products\/71N7y3CnIEL.jpg?v=1661631375","\/\/leoforward.com\/cdn\/shop\/products\/61yw3NH4yxL.jpg?v=1661631375","\/\/leoforward.com\/cdn\/shop\/products\/610HbvEiJCL.jpg?v=1661631375"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/61gcQUFzbbL.jpg?v=1661631375","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Geekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack","id":30323685654765,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61gcQUFzbbL.jpg?v=1661631375"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61gcQUFzbbL.jpg?v=1661631375","width":1500},{"alt":" [AUSTRALIA] - Geekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack","id":30323685687533,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61hBuoUNpcL.jpg?v=1661631375"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61hBuoUNpcL.jpg?v=1661631375","width":1500},{"alt":" [AUSTRALIA] - Geekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack","id":30323685720301,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61znZTHdGIL.jpg?v=1661631375"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61znZTHdGIL.jpg?v=1661631375","width":1500},{"alt":" [AUSTRALIA] - Geekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack","id":30323685753069,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61VeOddpoSL.jpg?v=1661631375"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61VeOddpoSL.jpg?v=1661631375","width":1500},{"alt":" [AUSTRALIA] - Geekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack","id":30323685785837,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71N7y3CnIEL.jpg?v=1661631375"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71N7y3CnIEL.jpg?v=1661631375","width":1500},{"alt":" [AUSTRALIA] - Geekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack","id":30323685818605,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61yw3NH4yxL.jpg?v=1661631375"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61yw3NH4yxL.jpg?v=1661631375","width":1500},{"alt":" [AUSTRALIA] - Geekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack","id":30323685851373,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/610HbvEiJCL.jpg?v=1661631375"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/610HbvEiJCL.jpg?v=1661631375","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGeekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 4B\/3B+\/3B\/2B\/B+\/A+\/Zero W\/Zero 2 W(5 Specifications 10Pcs), Raspberry Pi GPIO Stacking Header\/Extender, Raspberry Pi Pico Header Pack\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003e[Overview] This gpio headers kit includes 4 types of pin\nheaders you need during the raspberry pi project, including 2pcs 2x20 Female\nHeader, 2pcs 2x20 Female Header, 2pcs 2x20 Female Header,2ps 2x20 Pin Header,\nstored in a transparent plastic box to meets most of your needs in one kit.\nAll headers are 2.54mm pitch, you can use this raspberry pi gpio extender for\nthe newest Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+, Raspberry Pi 3\nModel B, Pi 2B\/B+\/A+. And the 2x20 Pin Header is for Raspberry Pi Zero \/ Zero\nW\/Zero 2W. [Specification] Material: Insulated plastic, hard metal pinNumber\nof Pins: 220Pin (2.54mm pitch)Row Type: double rowGender of Connector:\nFemalePin length: please refer to the packing list and photo show.Application:\nWidely be used in Raspberry Pi DIY project, such as for electronic circuit,\nPCB circuit board etc. electronic project [Packing List] 2 2x20 Female\nHeader (Pin Len: 12mm)2 2x20 Female Header (Pin Len: 10.7mm)2 2x20 Female\nHeader (Pin Len: 5.5mm)2 2x20 Pin Header\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePacking List: 2 * 2x20 Female Header (Pin Len: 12mm), 2 * 2x20 Female Header (Pin Len: 10.7mm), 2 * 2x20 Female Header (Pin Len: 5.5mm), 2 * 2x20 Pin Header\u003c\/li\u003e\n\u003cli\u003eThe 2x20 Pin Header is for Raspberry Pi Zero \/ Zero W\/ Zero 2 W.\u003c\/li\u003e\n\u003cli\u003eMaterial: Insulated plastic, hard metal pin\u003c\/li\u003e\n\u003cli\u003eApplication: Widely be used in Raspberry Pi DIY project, such as for electronic circuit, PCB circuit board etc. electronic project\u003c\/li\u003e\n\u003cli\u003eStacking header for Raspberry Pi 4, Pi 3, Pi 2, Pi Model B+, Pi A+, Pi Zero, Pi Zero W\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":8059075428589,"title":"Geekworm 5V Uninterruptible Power Supply UPS for Jetson Nano Developer Kit, T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) \u0026 Power Management Expansion Board Compatible with Jetson Nano 2GB\/4GB","handle":"geekworm-5v-uninterruptible-power-supply-ups-for-jetson-nano-developer-kit-t201-1-cell-18650-ups-max-5-1v-4a-output-power-management-expansion-board-compatible-with-jetson-nano-2gb-4gb","description":"\u003ch3\u003eGeekworm 5V Uninterruptible Power Supply UPS for Jetson Nano Developer Kit, T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) \u0026amp; Power Management Expansion Board Compatible with Jetson Nano 2GB\/4GB\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Note: The Jetson Nano board \u0026amp; 18650 battery is\nnot included in the packing list. Overview T201 is a compact one-cell 18650\nUPS Shield specially designed for NVIDIA Jetson Nano Developer Kit, it\nprovides smart and powerful uninterruptible power supply and safe power\nmanagement for Jetson Nano 2GB\/4GB. User Manaul: wiki.geekworm.com\/T201\nFeatures Ideal Uninterruptible Power Supply (UPS) solution for Jetson Nano\nDeveloper KitMax 5.1V 4000mA Power Backup for Jetson NanoWith 18650 single\ncell battery holderUpto 1000mA charging currentAC power loss \u0026amp; power adapter\nfailure detection (LED \u0026amp; GPIO)Automatic powering off after system safe\nshutdownIntegrated battery reverse polarity protection circuit Integrated over\ncurrent protection and over voltage protectionIntelligent automatic charging\nand discharging4 blue LEDs indicate battery charging and discharging levels of\n25%, 50% , 75% and 100%Powers the Jetson Nano via the 40-pin header - no\nadditional cabling requiredReserves the 40-pin header that can be stacked with\nother accessory boardsOn-board press button to control power on \/offPress the\nbutton to power onPress the button for 3 seconds to power off How to Power\nPower via DC 5521 power jack of T201: DC 5V±5%, ≥4A Packing List 1x T201 V1.0\nUPS Shield3x M2.5x20mm F\/F Spacers6x M2.5x6mm Screws1x Jumper link Pitch\n2.54mm FAQ Which GPIO of Jetson Nano has been occupied by T201 UPS? A: The\nGPIO4 has been occupied by T201, the rest GPIOs are available to use.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eT201 is compatible with Jetson Nano 2GB\/4GB version, supports only 1-cell 18650 batteries.\u003c\/li\u003e\n \u003cli\u003eT201 can provide Max 5.1V 4000mA Power Backup for Jetson Nano, upto 1000mA charging current.\u003c\/li\u003e\n \u003cli\u003eAC power loss \u0026amp; power adapter failure detection (LED \u0026amp; GPIO); automatic powering off after system safe shutdown.\u003c\/li\u003e\n \u003cli\u003eHow to PowerPower via DC 5521 power jack of T201: DC 5V5%, 4A\u003c\/li\u003e\n \u003cli\u003eOn-board press button to control power on \/off, Press the button to power on, Press the button for 3 seconds to power off\u003c\/li\u003e\n \u003cli\u003ePacking List1 x T201 V1.0 UPS expansion board; 3x M2.5x20mm F\/F Spacers;6x M2.5x6mm Screws;1x Jumper link Pitch 2.54mm\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003chr class=\"py-vbody\" style=\"display: none\"\u003e\n\n\n","published_at":"2022-11-26T13:25:54+11:00","created_at":"2022-11-26T13:26:01+11:00","vendor":"Geekworm","type":"","tags":["electronics_new_Nov2022"],"price":14800,"price_min":14800,"price_max":14800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43526156484845,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0B8SFCMWD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm 5V Uninterruptible Power Supply UPS for Jetson Nano Developer Kit, T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) \u0026 Power Management Expansion Board Compatible with Jetson Nano 2GB\/4GB","public_title":null,"options":["Default Title"],"price":14800,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"TB-2022-58","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/61Ktrxc-_OL.jpg?v=1669429561","\/\/leoforward.com\/cdn\/shop\/products\/61PIsEZPsKL.jpg?v=1669429561","\/\/leoforward.com\/cdn\/shop\/products\/618NJS3amFL.jpg?v=1669429561","\/\/leoforward.com\/cdn\/shop\/products\/61GYaxB2FCL.jpg?v=1669429561","\/\/leoforward.com\/cdn\/shop\/products\/71VGc5CCL9L.jpg?v=1669429561","\/\/leoforward.com\/cdn\/shop\/products\/61lhc4RYzWL.jpg?v=1669429561"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/61Ktrxc-_OL.jpg?v=1669429561","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Geekworm 5V Uninterruptible Power Supply UPS for Jetson Nano Developer Kit, T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) \u0026 Power Management Expansion Board Compatible with Jetson Nano 2GB\/4GB","id":30762815717613,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61Ktrxc-_OL.jpg?v=1669429561"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61Ktrxc-_OL.jpg?v=1669429561","width":2000},{"alt":" [AUSTRALIA] - Geekworm 5V Uninterruptible Power Supply UPS for Jetson Nano Developer Kit, T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) \u0026 Power Management Expansion Board Compatible with Jetson Nano 2GB\/4GB","id":30762815750381,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61PIsEZPsKL.jpg?v=1669429561"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61PIsEZPsKL.jpg?v=1669429561","width":2000},{"alt":" [AUSTRALIA] - Geekworm 5V Uninterruptible Power Supply UPS for Jetson Nano Developer Kit, T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) \u0026 Power Management Expansion Board Compatible with Jetson Nano 2GB\/4GB","id":30762815783149,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/618NJS3amFL.jpg?v=1669429561"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/618NJS3amFL.jpg?v=1669429561","width":2000},{"alt":" [AUSTRALIA] - Geekworm 5V Uninterruptible Power Supply UPS for Jetson Nano Developer Kit, T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) \u0026 Power Management Expansion Board Compatible with Jetson Nano 2GB\/4GB","id":30762815815917,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61GYaxB2FCL.jpg?v=1669429561"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61GYaxB2FCL.jpg?v=1669429561","width":2000},{"alt":" [AUSTRALIA] - Geekworm 5V Uninterruptible Power Supply UPS for Jetson Nano Developer Kit, T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) \u0026 Power Management Expansion Board Compatible with Jetson Nano 2GB\/4GB","id":30762815848685,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71VGc5CCL9L.jpg?v=1669429561"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71VGc5CCL9L.jpg?v=1669429561","width":2000},{"alt":" [AUSTRALIA] - Geekworm 5V Uninterruptible Power Supply UPS for Jetson Nano Developer Kit, T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) \u0026 Power Management Expansion Board Compatible with Jetson Nano 2GB\/4GB","id":30762815881453,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61lhc4RYzWL.jpg?v=1669429561"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61lhc4RYzWL.jpg?v=1669429561","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eGeekworm 5V Uninterruptible Power Supply UPS for Jetson Nano Developer Kit, T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) \u0026amp; Power Management Expansion Board Compatible with Jetson Nano 2GB\/4GB\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Note: The Jetson Nano board \u0026amp; 18650 battery is\nnot included in the packing list. Overview T201 is a compact one-cell 18650\nUPS Shield specially designed for NVIDIA Jetson Nano Developer Kit, it\nprovides smart and powerful uninterruptible power supply and safe power\nmanagement for Jetson Nano 2GB\/4GB. User Manaul: wiki.geekworm.com\/T201\nFeatures Ideal Uninterruptible Power Supply (UPS) solution for Jetson Nano\nDeveloper KitMax 5.1V 4000mA Power Backup for Jetson NanoWith 18650 single\ncell battery holderUpto 1000mA charging currentAC power loss \u0026amp; power adapter\nfailure detection (LED \u0026amp; GPIO)Automatic powering off after system safe\nshutdownIntegrated battery reverse polarity protection circuit Integrated over\ncurrent protection and over voltage protectionIntelligent automatic charging\nand discharging4 blue LEDs indicate battery charging and discharging levels of\n25%, 50% , 75% and 100%Powers the Jetson Nano via the 40-pin header - no\nadditional cabling requiredReserves the 40-pin header that can be stacked with\nother accessory boardsOn-board press button to control power on \/offPress the\nbutton to power onPress the button for 3 seconds to power off How to Power\nPower via DC 5521 power jack of T201: DC 5V±5%, ≥4A Packing List 1x T201 V1.0\nUPS Shield3x M2.5x20mm F\/F Spacers6x M2.5x6mm Screws1x Jumper link Pitch\n2.54mm FAQ Which GPIO of Jetson Nano has been occupied by T201 UPS? A: The\nGPIO4 has been occupied by T201, the rest GPIOs are available to use.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eT201 is compatible with Jetson Nano 2GB\/4GB version, supports only 1-cell 18650 batteries.\u003c\/li\u003e\n \u003cli\u003eT201 can provide Max 5.1V 4000mA Power Backup for Jetson Nano, upto 1000mA charging current.\u003c\/li\u003e\n \u003cli\u003eAC power loss \u0026amp; power adapter failure detection (LED \u0026amp; GPIO); automatic powering off after system safe shutdown.\u003c\/li\u003e\n \u003cli\u003eHow to PowerPower via DC 5521 power jack of T201: DC 5V5%, 4A\u003c\/li\u003e\n \u003cli\u003eOn-board press button to control power on \/off, Press the button to power on, Press the button for 3 seconds to power off\u003c\/li\u003e\n \u003cli\u003ePacking List1 x T201 V1.0 UPS expansion board; 3x M2.5x20mm F\/F Spacers;6x M2.5x6mm Screws;1x Jumper link Pitch 2.54mm\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003chr class=\"py-vbody\" style=\"display: none\"\u003e\n\n\n"}

{"id":7874563801325,"title":"Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B","handle":"geekworm-dacpi-ultra-thin-audio-player-kit-for-raspberry-pi-4-model-b-nuc-style-aluminum-alloy-case-x950-pcm5122-dac-passive-cooling-embedded-heatsink-for-raspberry-pi-4b","description":"\u003ch1\u003eGeekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eRead more Note: The DACPi kit does not include the\nRaspberry Pi 4 Board. [Overview] Geekworm DACPi is an ultra-thin desktop DAC\nkit based on the latest raspberry pi 4; We know that there are many DAC\nexpansion boards released on the market, but there is a common shortcoming\nthat they are too thick. We redesigned the DAC expansion board (X950) and\ntried our best to make this DAC the thinnest and matched a NUC style aluminum\nalloy shell, the final thickness of DACPi is only 31mm, hope you will like it.\nDACPi adopts modular design, it composed of three parts: X950 DAC Shield,\ncooling system ( P165-B embedded heatsink), and a ultra-thin NUC style\naluminum case; Just simply assemble them with the Raspberry Pi 4 motherboard.\nX950 shield can turn your Raspberry pi 4 into a ready-to-play High Resolution\nNetwork Music Player.DACPi case is made of all aluminum alloy, CNC processing\nmethod, surface anodizing treatment.For the cooling solution, considering that\nthe active cooling fan will interfere with the sound quality, we abandoned the\nX823-A3 active cooling solution in NASPi, and we only use P165-B(\nB08N617L1J) to dissipate heat, which can provide enough heat dissipation if\nthere is no overclocking, but P165-B may be a slight impact on WIFI. You can\nremove the heatsink also. [User Manual]\nwiki.geekworm.com\/DACPiyoutu.be\/Ujd5kJAghlE (Installation Video) [Features]\nNUC style shell, thinnest flat design, only 31mm thicknessUse high quality\nPCM5122 DAC SolutionPassive heat dissipation, no noisePowered by the Raspberry\nPi PSU- no additional power supply requiredClass leading audio: 112db SNR, and\nTHD of 0.0019% [How to Power] Power supply: 5Vdc +\/-5% , ≥3A (Via Type-C port\nof Raspberry Pi 4) (Recommended to use Geekworm UL listed 20W 5V 4A Type-C\npower adapter(B09J856PND) . [​For Use With] Raspberry Pi 4 Model B\nOnly(X950 is compatible with Raspberry Pi 3 also, but both DACPi case and\nP165-B are not compatible with Pi 3)Operating System: Volumio \/ OSMC\/\nOpenelec\/ Raspbian OS\/ Moode Audio Player \/Max2Play\/RoPiee [Packing List]\nGeekworm DACPi Aluminum Case An ultra-thin NUC-style aluminum case for\nRaspberry Pi 4 X950 DAC Shield A Raspberry Pi HiFi DAC HAT PCM5122 Audio\nexpansion Board P165-B embedded Heatsink for Pi 4 P165-B provides the heat\ndissipation function of DACPi Read more [Support Mouting Assembly] Support\nMouting Assembly Read more\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDACPi Aluminum CaseUltra-Thin NUC Aluminum Alloy Case, specially designed for Raspberry Pi, reseved all interface of Pi 4.\u003c\/li\u003e\n\u003cli\u003eX950 DAC Shield Uses a Texas Instruments PCM5122 DAC to deliver stereo analogue audio to a pair of phono connectors, and also provides a dedicated headphone amplifier, supporting 24bit 192kHz high-resolution digital audio.\u003c\/li\u003e\n\u003cli\u003eCooling SolutionConsidering that the cooling fan will interfere with the sound quality, only use P165-B embedded heatsink to dissipate heat, which can provide good heat dissipation if there is no overclocking.\u003c\/li\u003e\n\u003cli\u003eCompatibilityOnly for Raspberry Pi 4 (NOT include Pi 4 board), compatible with Volumio, Rune, OSMC, MoodeAudio, Raspbian Jessie, Openelec etc.\u003c\/li\u003e\n\u003cli\u003eWifi Description5G WiFi is stable enough, recommend using Ethernet or 5G WiFi due to metal case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-06T19:14:11+10:00","created_at":"2022-08-06T19:14:19+10:00","vendor":"Geekworm","type":"Single Board Computers","tags":["electronics"],"price":21700,"price_min":21700,"price_max":21700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43094132359405,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B096TV9164","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B","public_title":null,"options":["Default Title"],"price":21700,"weight":261,"compare_at_price":null,"inventory_management":null,"barcode":"TB-2021-27","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/61lBlw2wFvS.jpg?v=1659777259","\/\/leoforward.com\/cdn\/shop\/products\/81OYPhecV-L.jpg?v=1659777259","\/\/leoforward.com\/cdn\/shop\/products\/71Q-G2xjmVL_a31a11db-9e63-491f-9303-96918e3e0ed5.jpg?v=1659777259","\/\/leoforward.com\/cdn\/shop\/products\/71tTe1InP5L_ace67e05-e7ac-4bd9-b028-1105d4cc90af.jpg?v=1659777259","\/\/leoforward.com\/cdn\/shop\/products\/610t-6MwCGS_da0b05ff-7b37-4dfc-aa66-75242f99dd97.jpg?v=1659777259","\/\/leoforward.com\/cdn\/shop\/products\/71EjymSHL2S_7dd25d26-a327-434d-96c1-8f5277ba4905.jpg?v=1659777259","\/\/leoforward.com\/cdn\/shop\/products\/816KPbNjPrS_f2ee89f0-7c53-4cd8-ba57-0073705414b5.jpg?v=1659777259"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/61lBlw2wFvS.jpg?v=1659777259","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B","id":30200385536237,"position":1,"preview_image":{"aspect_ratio":1.001,"height":1999,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61lBlw2wFvS.jpg?v=1659777259"},"aspect_ratio":1.001,"height":1999,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61lBlw2wFvS.jpg?v=1659777259","width":2000},{"alt":" [AUSTRALIA] - Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B","id":30200385569005,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81OYPhecV-L.jpg?v=1659777259"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81OYPhecV-L.jpg?v=1659777259","width":2000},{"alt":" [AUSTRALIA] - Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B","id":30200385601773,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71Q-G2xjmVL_a31a11db-9e63-491f-9303-96918e3e0ed5.jpg?v=1659777259"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71Q-G2xjmVL_a31a11db-9e63-491f-9303-96918e3e0ed5.jpg?v=1659777259","width":2000},{"alt":" [AUSTRALIA] - Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B","id":30200385634541,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71tTe1InP5L_ace67e05-e7ac-4bd9-b028-1105d4cc90af.jpg?v=1659777259"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71tTe1InP5L_ace67e05-e7ac-4bd9-b028-1105d4cc90af.jpg?v=1659777259","width":2000},{"alt":" [AUSTRALIA] - Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B","id":30200385667309,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/610t-6MwCGS_da0b05ff-7b37-4dfc-aa66-75242f99dd97.jpg?v=1659777259"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/610t-6MwCGS_da0b05ff-7b37-4dfc-aa66-75242f99dd97.jpg?v=1659777259","width":2000},{"alt":" [AUSTRALIA] - Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B","id":30200385700077,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71EjymSHL2S_7dd25d26-a327-434d-96c1-8f5277ba4905.jpg?v=1659777259"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71EjymSHL2S_7dd25d26-a327-434d-96c1-8f5277ba4905.jpg?v=1659777259","width":2000},{"alt":" [AUSTRALIA] - Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B","id":30200385732845,"position":7,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/816KPbNjPrS_f2ee89f0-7c53-4cd8-ba57-0073705414b5.jpg?v=1659777259"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/816KPbNjPrS_f2ee89f0-7c53-4cd8-ba57-0073705414b5.jpg?v=1659777259","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGeekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eRead more Note: The DACPi kit does not include the\nRaspberry Pi 4 Board. [Overview] Geekworm DACPi is an ultra-thin desktop DAC\nkit based on the latest raspberry pi 4; We know that there are many DAC\nexpansion boards released on the market, but there is a common shortcoming\nthat they are too thick. We redesigned the DAC expansion board (X950) and\ntried our best to make this DAC the thinnest and matched a NUC style aluminum\nalloy shell, the final thickness of DACPi is only 31mm, hope you will like it.\nDACPi adopts modular design, it composed of three parts: X950 DAC Shield,\ncooling system ( P165-B embedded heatsink), and a ultra-thin NUC style\naluminum case; Just simply assemble them with the Raspberry Pi 4 motherboard.\nX950 shield can turn your Raspberry pi 4 into a ready-to-play High Resolution\nNetwork Music Player.DACPi case is made of all aluminum alloy, CNC processing\nmethod, surface anodizing treatment.For the cooling solution, considering that\nthe active cooling fan will interfere with the sound quality, we abandoned the\nX823-A3 active cooling solution in NASPi, and we only use P165-B(\nB08N617L1J) to dissipate heat, which can provide enough heat dissipation if\nthere is no overclocking, but P165-B may be a slight impact on WIFI. You can\nremove the heatsink also. [User Manual]\nwiki.geekworm.com\/DACPiyoutu.be\/Ujd5kJAghlE (Installation Video) [Features]\nNUC style shell, thinnest flat design, only 31mm thicknessUse high quality\nPCM5122 DAC SolutionPassive heat dissipation, no noisePowered by the Raspberry\nPi PSU- no additional power supply requiredClass leading audio: 112db SNR, and\nTHD of 0.0019% [How to Power] Power supply: 5Vdc +\/-5% , ≥3A (Via Type-C port\nof Raspberry Pi 4) (Recommended to use Geekworm UL listed 20W 5V 4A Type-C\npower adapter(B09J856PND) . [​For Use With] Raspberry Pi 4 Model B\nOnly(X950 is compatible with Raspberry Pi 3 also, but both DACPi case and\nP165-B are not compatible with Pi 3)Operating System: Volumio \/ OSMC\/\nOpenelec\/ Raspbian OS\/ Moode Audio Player \/Max2Play\/RoPiee [Packing List]\nGeekworm DACPi Aluminum Case An ultra-thin NUC-style aluminum case for\nRaspberry Pi 4 X950 DAC Shield A Raspberry Pi HiFi DAC HAT PCM5122 Audio\nexpansion Board P165-B embedded Heatsink for Pi 4 P165-B provides the heat\ndissipation function of DACPi Read more [Support Mouting Assembly] Support\nMouting Assembly Read more\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDACPi Aluminum CaseUltra-Thin NUC Aluminum Alloy Case, specially designed for Raspberry Pi, reseved all interface of Pi 4.\u003c\/li\u003e\n\u003cli\u003eX950 DAC Shield Uses a Texas Instruments PCM5122 DAC to deliver stereo analogue audio to a pair of phono connectors, and also provides a dedicated headphone amplifier, supporting 24bit 192kHz high-resolution digital audio.\u003c\/li\u003e\n\u003cli\u003eCooling SolutionConsidering that the cooling fan will interfere with the sound quality, only use P165-B embedded heatsink to dissipate heat, which can provide good heat dissipation if there is no overclocking.\u003c\/li\u003e\n\u003cli\u003eCompatibilityOnly for Raspberry Pi 4 (NOT include Pi 4 board), compatible with Volumio, Rune, OSMC, MoodeAudio, Raspbian Jessie, Openelec etc.\u003c\/li\u003e\n\u003cli\u003eWifi Description5G WiFi is stable enough, recommend using Ethernet or 5G WiFi due to metal case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":7880633581805,"title":"Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD","handle":"geekworm-for-raspberry-pi-4-x862-v2-0-m-2-ngff-sata-ssd-storage-expansion-board-uasp-supported-compatible-with-raspberry-pi-4-model-b-only-support-key-b-2280-ssd","description":"\u003ch1\u003eGeekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eRead more User Manual: wiki.geekworm.com\/X862_V2.0 About\nthe EMC Interference Issue: We are trying to solve the issue of EMC\ninterference between Raspberry Pi 4 and USB3.0 device with X862 V2.0, X857\nV2.0 and X873 V1.2. But we get several feedback that if the external USB\ndevice (like mouse, keyboard, display) connected, the system maybe unstable or\nnot boot from the SSD. It suggest to use a USB3 type A to USB3 type A male-to-\nmale cable to replace the USB connetor to test. UPDATE Notification: 1. The\nX862 has been updated to X862 V2.0 from X862 V1.0 version in Febuary 2021.\nSome changes: We removed the DC JACK power socket of X862 V2.0, X862 V2.0 is\npowered via USB 3.0 connector.We use shorter copper spacer to connect\nRaspberry Pi 4 and X862 V2.0, which reduces the height of the entire product,\nso the matching metal case X857-C3 is shoter 3mm than X857-C1;But if you use a\nmetal shell like X857-C3, then you can only use 5.8G wifi AP, 2.4G wifi will\nnot be available(be shielded by metal case);As a Raspberry pi NAS device, we\nadvised that you use ethernet network to replace wifi, this will be more\nstable and reliable.Only supports M.2 NGFF SSD 2280 lengthUASP supported for\nRaspberry Pi 4, NOT support TRIM 2. The case of X862 V1.0 and X862 V2.0 are\ndifferent. X862 V1.0 should use X857-C1 Case, but X862 V2.0 use X857-C3 Case.\n[Overview] This is new updated X862 V2.0 version from X862 V1.0. We try to\nsolve the EMC interference issue between Raspberry Pi 4 and USB3.0 device. The\nX862 V2.0 M.2 NGFF SATA SSD Shield is designed for Raspberry Pi 4 model B, it\nprovides a complete storage solution for Raspberry Pi 4. New X862 V2.0 ONLY\nsupport M.2 NGFF SSD Key-B 2280 length. The X860 V2.0 support UASP. [Key\nFeatures] Ideal storage solution for Raspberry Pi 4 - M.2 NGFF SATA SSD\nShieldSupports up to 2TB M.2 NGFF SSD solid-state driveOnly supports M.2 NGFF\nSSD 2280 lengthUASP supported for Raspberry Pi 4, no support TRIMAllows\nbooting OS from your HDD\/SSD for faster app opens, web serving and file\ncopying (see note 2)Integrated high efficiency step-Down Converter, 3.3V max\n4A to power the SSDSpecially-made USB3.1 jumper to connect with Raspberry Pi -\nno cabling required!Fully compatible with X735 for intelligent power\nmanagement and cooling your Raspberry Pi, compatible with X710 for wide input\nvoltage (6~36V) and intelligent power management, compatible with X765 for\npowering over Ethernet (POE, 5V 5A), compatible with X728 for uninterruptible\npower supply (18650 UPS, 5.1V 8A, smart power mgmt) Only Support M.2 NGFF\nKey-B SSD length 2280 Notes: Only compatible with Key-B SSD length 2280NGFF\nSATA SSD is not includedCompatible with M.2 NGFF SATA SSDs only, not\ncompatible with NVMe M.2 SSDsAs with all SSDs, new media must be formatted\nbefore useSSDs use exceptionally high performance storage media that will run\nhot when under loadOlder SSD drives with less efficient flash media may not\nperform as well as newer drives UPDATED X862 V2.0 Specifications For Use With\nRaspberry Pi 4 Model B Only Operating System All Raspberry Pi operating\nsystems Power supply 5Vdc +\/-5% , Powered via USB port by Raspberry Pi 4\nType-C port ; Ports \u0026amp; Connectors USB socket - USB 3.0 type A x1; 67Pin M.2\nconnector P=0.5mm, H3.2mm, Key B x1 PCB Size 87mm x 56mm Match Metal Case\nX857-C3(B08VJ6P48B), also support X735\/X708 installation Match Expansion\nBoard X735(B07R45W1LN)\/X708(B08DNRYM4Y) Document:\nwiki.geekworm.com\/X862_V2.0 How to Power X862 V2.0 with X735 How to select\nyour power adapter If you have a good quality USB Type-C power adapter, you\ncan also use a TYPE-C power adapter to supply power through X735 Type-C port,\notherwise we suggest you choose our power adapter with DC 5525 JACK. Packing\nList: 1x X862 V2.0 M.2 NGFF SATA 2280 SSD Shield1x USB3.1 jumper4x Screw M2.5\n6mm4x Spacer M\/F M2.5 7+6mm4x Spacer F\/F M2.5 9.5mm1x Screw driver1x Screw\nM2 4mm Read more\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpdated X862 V2.0 M.2 NGFF SATA SSD Shield can support up to 2TB m.2 NGFF SSD solid-state drive; Only supports Raspberry Pi 4 Model B; Supports M.2 NGFF 2280 SSD lengths ONLY; UASP supported only, not support TRIM\u003c\/li\u003e\n\u003cli\u003eAllows booting OS from your HDD\/SSD for faster app opens, web serving and file copying, refer to Geekworm WiKi search(Does_the_X825\/X855_support_USB_boot); If the SSD is not recoginzed or other issue, refer to X862 FAQ of WiKi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-11T16:24:44+10:00","created_at":"2022-08-11T16:24:52+10:00","vendor":"Geekworm","type":"Single Board Computers","tags":["electronics"],"price":15000,"price_min":15000,"price_max":15000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43107910516973,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B088HCY4TH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD","public_title":null,"options":["Default Title"],"price":15000,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"X862 V2.0","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/71b07tl6EvL.jpg?v=1660199092","\/\/leoforward.com\/cdn\/shop\/products\/61eYDiWCzrL.jpg?v=1660199092","\/\/leoforward.com\/cdn\/shop\/products\/71ya-HJZ4gL.jpg?v=1660199092","\/\/leoforward.com\/cdn\/shop\/products\/71B0LiNdO5L.jpg?v=1660199092","\/\/leoforward.com\/cdn\/shop\/products\/81GZzNRbbrL_cb9bc017-5dc3-4ea3-a530-8e3c26817daa.jpg?v=1660199092","\/\/leoforward.com\/cdn\/shop\/products\/616Qsopb-0L.jpg?v=1660199092","\/\/leoforward.com\/cdn\/shop\/products\/71H3XkA51HL_d3594450-61e5-40ee-8177-e475f612847e.jpg?v=1660199092","\/\/leoforward.com\/cdn\/shop\/products\/71Ek5g8hZkS_955c6d12-dc80-4184-be03-b9eab9c9cfc9.jpg?v=1660199092"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/71b07tl6EvL.jpg?v=1660199092","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD","id":30219125031149,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71b07tl6EvL.jpg?v=1660199092"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71b07tl6EvL.jpg?v=1660199092","width":1600},{"alt":" [AUSTRALIA] - Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD","id":30219125063917,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61eYDiWCzrL.jpg?v=1660199092"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61eYDiWCzrL.jpg?v=1660199092","width":1500},{"alt":" [AUSTRALIA] - Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD","id":30219125096685,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71ya-HJZ4gL.jpg?v=1660199092"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71ya-HJZ4gL.jpg?v=1660199092","width":1500},{"alt":" [AUSTRALIA] - Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD","id":30219125129453,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71B0LiNdO5L.jpg?v=1660199092"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71B0LiNdO5L.jpg?v=1660199092","width":1600},{"alt":" [AUSTRALIA] - Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD","id":30219125162221,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81GZzNRbbrL_cb9bc017-5dc3-4ea3-a530-8e3c26817daa.jpg?v=1660199092"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81GZzNRbbrL_cb9bc017-5dc3-4ea3-a530-8e3c26817daa.jpg?v=1660199092","width":2000},{"alt":" [AUSTRALIA] - Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD","id":30219125194989,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/616Qsopb-0L.jpg?v=1660199092"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/616Qsopb-0L.jpg?v=1660199092","width":1600},{"alt":" [AUSTRALIA] - Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD","id":30219125227757,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71H3XkA51HL_d3594450-61e5-40ee-8177-e475f612847e.jpg?v=1660199092"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71H3XkA51HL_d3594450-61e5-40ee-8177-e475f612847e.jpg?v=1660199092","width":1600},{"alt":" [AUSTRALIA] - Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD","id":30219125260525,"position":8,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71Ek5g8hZkS_955c6d12-dc80-4184-be03-b9eab9c9cfc9.jpg?v=1660199092"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71Ek5g8hZkS_955c6d12-dc80-4184-be03-b9eab9c9cfc9.jpg?v=1660199092","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGeekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eRead more User Manual: wiki.geekworm.com\/X862_V2.0 About\nthe EMC Interference Issue: We are trying to solve the issue of EMC\ninterference between Raspberry Pi 4 and USB3.0 device with X862 V2.0, X857\nV2.0 and X873 V1.2. But we get several feedback that if the external USB\ndevice (like mouse, keyboard, display) connected, the system maybe unstable or\nnot boot from the SSD. It suggest to use a USB3 type A to USB3 type A male-to-\nmale cable to replace the USB connetor to test. UPDATE Notification: 1. The\nX862 has been updated to X862 V2.0 from X862 V1.0 version in Febuary 2021.\nSome changes: We removed the DC JACK power socket of X862 V2.0, X862 V2.0 is\npowered via USB 3.0 connector.We use shorter copper spacer to connect\nRaspberry Pi 4 and X862 V2.0, which reduces the height of the entire product,\nso the matching metal case X857-C3 is shoter 3mm than X857-C1;But if you use a\nmetal shell like X857-C3, then you can only use 5.8G wifi AP, 2.4G wifi will\nnot be available(be shielded by metal case);As a Raspberry pi NAS device, we\nadvised that you use ethernet network to replace wifi, this will be more\nstable and reliable.Only supports M.2 NGFF SSD 2280 lengthUASP supported for\nRaspberry Pi 4, NOT support TRIM 2. The case of X862 V1.0 and X862 V2.0 are\ndifferent. X862 V1.0 should use X857-C1 Case, but X862 V2.0 use X857-C3 Case.\n[Overview] This is new updated X862 V2.0 version from X862 V1.0. We try to\nsolve the EMC interference issue between Raspberry Pi 4 and USB3.0 device. The\nX862 V2.0 M.2 NGFF SATA SSD Shield is designed for Raspberry Pi 4 model B, it\nprovides a complete storage solution for Raspberry Pi 4. New X862 V2.0 ONLY\nsupport M.2 NGFF SSD Key-B 2280 length. The X860 V2.0 support UASP. [Key\nFeatures] Ideal storage solution for Raspberry Pi 4 - M.2 NGFF SATA SSD\nShieldSupports up to 2TB M.2 NGFF SSD solid-state driveOnly supports M.2 NGFF\nSSD 2280 lengthUASP supported for Raspberry Pi 4, no support TRIMAllows\nbooting OS from your HDD\/SSD for faster app opens, web serving and file\ncopying (see note 2)Integrated high efficiency step-Down Converter, 3.3V max\n4A to power the SSDSpecially-made USB3.1 jumper to connect with Raspberry Pi -\nno cabling required!Fully compatible with X735 for intelligent power\nmanagement and cooling your Raspberry Pi, compatible with X710 for wide input\nvoltage (6~36V) and intelligent power management, compatible with X765 for\npowering over Ethernet (POE, 5V 5A), compatible with X728 for uninterruptible\npower supply (18650 UPS, 5.1V 8A, smart power mgmt) Only Support M.2 NGFF\nKey-B SSD length 2280 Notes: Only compatible with Key-B SSD length 2280NGFF\nSATA SSD is not includedCompatible with M.2 NGFF SATA SSDs only, not\ncompatible with NVMe M.2 SSDsAs with all SSDs, new media must be formatted\nbefore useSSDs use exceptionally high performance storage media that will run\nhot when under loadOlder SSD drives with less efficient flash media may not\nperform as well as newer drives UPDATED X862 V2.0 Specifications For Use With\nRaspberry Pi 4 Model B Only Operating System All Raspberry Pi operating\nsystems Power supply 5Vdc +\/-5% , Powered via USB port by Raspberry Pi 4\nType-C port ; Ports \u0026amp; Connectors USB socket - USB 3.0 type A x1; 67Pin M.2\nconnector P=0.5mm, H3.2mm, Key B x1 PCB Size 87mm x 56mm Match Metal Case\nX857-C3(B08VJ6P48B), also support X735\/X708 installation Match Expansion\nBoard X735(B07R45W1LN)\/X708(B08DNRYM4Y) Document:\nwiki.geekworm.com\/X862_V2.0 How to Power X862 V2.0 with X735 How to select\nyour power adapter If you have a good quality USB Type-C power adapter, you\ncan also use a TYPE-C power adapter to supply power through X735 Type-C port,\notherwise we suggest you choose our power adapter with DC 5525 JACK. Packing\nList: 1x X862 V2.0 M.2 NGFF SATA 2280 SSD Shield1x USB3.1 jumper4x Screw M2.5\n6mm4x Spacer M\/F M2.5 7+6mm4x Spacer F\/F M2.5 9.5mm1x Screw driver1x Screw\nM2 4mm Read more\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpdated X862 V2.0 M.2 NGFF SATA SSD Shield can support up to 2TB m.2 NGFF SSD solid-state drive; Only supports Raspberry Pi 4 Model B; Supports M.2 NGFF 2280 SSD lengths ONLY; UASP supported only, not support TRIM\u003c\/li\u003e\n\u003cli\u003eAllows booting OS from your HDD\/SSD for faster app opens, web serving and file copying, refer to Geekworm WiKi search(Does_the_X825\/X855_support_USB_boot); If the SSD is not recoginzed or other issue, refer to X862 FAQ of WiKi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":7891099844845,"title":"Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","handle":"geekworm-n100-metal-case-enclosure-with-power-reset-control-switch-camera-holder-for-jetson-nano-a02-b01-2gb-4gb-jetson-xavier-nx","description":"\u003ch1\u003eGeekworm N100 Metal Case \/ Enclosure with Power \u0026amp; Reset Control Switch \u0026amp; Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eUpdate Notification: In November 2020, the N100 case has\nbeen updated to new version N100-V11, we update the case to support the latest\nJetson nano 2GB version, NOW it support Jetson nano A02\/B01\/2GB\/4GB version,\nalso support Jetson Xavier NX. (Note: Please remove the 2pcs metal cover in\nfront of the USB3 and Hdmi port when use N100-V11 with Jetson Nano A02 and B01\nand Jetson Xavier NX.) Maybe there is mixed N100-V9 version, N100-V9 does not\nsupport Jetson nano 2GB version.In March 21st 2020, the N100 case has been\nupdated to new version, the new version support both Jetson nano A02 and B01\nversion. Also we remove the TF card slot in the new version case.The NVIDIA\nJetson Nano Metal Case updated to the second version with 3 holes at the back\ncover on June 7th 2019, the first version is released on May 10th 2019. So if\nyou get the Jetson Nano Case with only one antenna hole at the back cover, it\nmust be the first version, when the first version is sold out, we release the\nsecond version with 3 holes at the back cover. Overview This is a metal case\nspecially designed for NVIDIA Jetson Nano Developer Kit by Geekworm,support\nboth A02 and B01 version and it supports power switch and reset switch,It also\nsupports installation of up to 3 antennas, at the same time, we adjusted the\nsize of the antenna hole based on the previous version so that you can install\nthe official Raspberry Pi official camera only. The diameter of the antenna\nhole is 7.3mm. and it's reserve the GPIO hole and the installation space of\nthe fan, and easily assemble it. We recommend that you read the introduction\nto the power supply in the official documentation before you assemble this\ncase, thus you can understand this case deeply. Note: The NVIDIA Jetson Nano\nDeveloper Kit and antenna are not included, and the 4-pin cooling fan is aslo\nnot included in the packing list! Installation Video for Jetson Nano A02:\nyoutu.be\/SpUB6h4Akp4 Installation Video for Jetson Nano B01\/2GB:\nyoutu.be\/Q5n2Aa_z0qI Installation Video for Jetson Xavier NX:\nyoutu.be\/7Cqr9R04htc Power Supply(Recommend) There is a certificated DC 5V 4A\nPower Adapter with US Plug for NVIDIA Jetson Nano Board, please refer to\nB07413Q5Y4 . FAQ Q1: Why was the MICRO SD card slot cancelled? A: N100-V9 is\ncompatible with both A02 and B01 versions now. We must increase the distance\nbetween the JETSON NANO motherboard and the front panel of the case to install\nthe switch. We found that even if we kept the TF card slot, we couldn't insert\nthe TF card by hand or plastic tweezers, so we have to cancel this card slot;\nWe hope that the official NVIDIA will adjust the position of J50 in subsequent\nversions. For more questions, please refer to the official forum. Q2:How to\nassemble this NVIDIA Jetson Nano case? A: Please refer to the picture on our\nwiki:raspberrypiwiki (N100) Q3: Is it supported to install a cooling fan? A:\nYes, it is support for fan installation, 22mm high fan installation height is\nreserved. It is support to install Noctua NF-A4x20 5V PWM fan (\nB071FNHVXN). (We test this fan it is ok to use and a good choice.) Q4: How do\nI use the jumper cap? A: Because this case has a power switch, you need to\ndisable the AUTO ON function first. Please insert the jumper cap into the AUTO\nON position of the J40 pin to disable the AUTO ON function.(On the back of\nyour board there is words \" AUTO ON DIS\") Q5: Which cooling fan shoud I choose\nfor this case? A: We strongly suggest that you can use this Noctua NF-A4x20 5V\nPWM fan, please refer to B071FNHVXN for the cooling fan (We have prepared the\nmatching screws for this fan in the packing list). Q6: What is the purpose of\nABS Tweezers in the case? A: The ABS Tweezers are use to help install the\ncooling fan on your NVIDIA Jetson Nano Developer Kit , please refer to video:\nyoutu.be\/SpUB6h4Akp4 Q7: Does it support camera installation? A: Yes. It's\nonly support the raspberry pi offical camera, and this camera is recommend by\nNVIDIA. you can insert the camera into the antenna hole. Key Features:\nEquipped with power control switch and reset switch, and it is convenient to\nstart with one button. The power switch has LED indicator. The reset switch is\nplaced on the back to prevent accidential touch. Support to install a cooling\nfan, reserve 22mm high fan installation height, easy to install the official\nrecommend fan. The 3 antenna holes are reserved to faciliate the arrangement\nof the external antenna. (as the antenna in the photo is not included if you\nneed to use you have to buy it yourself) Only the raspberry pi official camera\ncan be inserted into the antenna hole. (Because we don't know the size of the\nothers camera) For Jetson Nano 2GB, please also refer to Jetson Nano B01\nPacking List 1 x N100 Metal Case for NVIDIA Jetson Nano Board 1 x Power\nSwitch(Momentary switch, power on the board) 1 x Reset Switch (Momentary\nswitch, reset the board) 2 x Jumper (Disabled the AUTO ON, and toggle the\npower supply between Micro USB and DC Jack) 1 x Screws Pack 1 x ABS Tweezers\n(It is used to help install the cooling fan on your NVIDIA Jetson Nano board)\nRead more\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA metal case N100 specially designed for Jetson Nano Developer Kit Rev A02 and B01 by Geekworm; New update case verisom with TF card slot has been removed, support Jetson Nano A02\/B01\/2GB\/4GB version, also support Jetson Xavier NX. User manual, search N100 at Geekworm WiKi page.\u003c\/li\u003e\n\u003cli\u003eNote: The Jetson Nano board, antennas and cooling fan are all not included in the packing list.\u003c\/li\u003e\n\u003cli\u003eAbout how to assemble this Geekworm N100 case, refer to Geekworm WiKi search N100 for installation video of Jetson Nano A02\/B01\/2GB\/Jetson Xavier NX.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-14T18:01:31+10:00","created_at":"2022-08-14T18:01:40+10:00","vendor":"Geekworm","type":"Computer Cases","tags":["electronics"],"price":15100,"price_min":15100,"price_max":15100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43163193901293,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07RRRX121","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","public_title":null,"options":["Default Title"],"price":15100,"weight":295,"compare_at_price":null,"inventory_management":null,"barcode":"N100","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/61ShZZ0Zc-L.jpg?v=1660464100","\/\/leoforward.com\/cdn\/shop\/products\/71q3S_xax7L.jpg?v=1660464100","\/\/leoforward.com\/cdn\/shop\/products\/61EuVfJyfzL.jpg?v=1660464100","\/\/leoforward.com\/cdn\/shop\/products\/71KyBTH_9eL.jpg?v=1660464100","\/\/leoforward.com\/cdn\/shop\/products\/717Q_mtEJfL.jpg?v=1660464100","\/\/leoforward.com\/cdn\/shop\/products\/71DDuF4qlUL.jpg?v=1660464100","\/\/leoforward.com\/cdn\/shop\/products\/81gYP9NLUWL.jpg?v=1660464100","\/\/leoforward.com\/cdn\/shop\/products\/713ya0ZbT9L.jpg?v=1660464100","\/\/leoforward.com\/cdn\/shop\/products\/713Q0uFbzIL.jpg?v=1660464100"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/61ShZZ0Zc-L.jpg?v=1660464100","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","id":30254068695277,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61ShZZ0Zc-L.jpg?v=1660464100"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61ShZZ0Zc-L.jpg?v=1660464100","width":1600},{"alt":" [AUSTRALIA] - Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","id":30254068728045,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71q3S_xax7L.jpg?v=1660464100"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71q3S_xax7L.jpg?v=1660464100","width":2000},{"alt":" [AUSTRALIA] - Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","id":30254068760813,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61EuVfJyfzL.jpg?v=1660464100"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61EuVfJyfzL.jpg?v=1660464100","width":2000},{"alt":" [AUSTRALIA] - Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","id":30254068793581,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71KyBTH_9eL.jpg?v=1660464100"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71KyBTH_9eL.jpg?v=1660464100","width":1500},{"alt":" [AUSTRALIA] - Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","id":30254068826349,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/717Q_mtEJfL.jpg?v=1660464100"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/717Q_mtEJfL.jpg?v=1660464100","width":1500},{"alt":" [AUSTRALIA] - Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","id":30254068859117,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71DDuF4qlUL.jpg?v=1660464100"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71DDuF4qlUL.jpg?v=1660464100","width":1500},{"alt":" [AUSTRALIA] - Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","id":30254068891885,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81gYP9NLUWL.jpg?v=1660464100"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81gYP9NLUWL.jpg?v=1660464100","width":1500},{"alt":" [AUSTRALIA] - Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","id":30254068924653,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/leoforward.com\/cdn\/shop\/products\/713ya0ZbT9L.jpg?v=1660464100"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/713ya0ZbT9L.jpg?v=1660464100","width":1500},{"alt":" [AUSTRALIA] - Geekworm N100 Metal Case \/ Enclosure with Power \u0026 Reset Control Switch \u0026 Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX","id":30254068957421,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/713Q0uFbzIL.jpg?v=1660464100"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/713Q0uFbzIL.jpg?v=1660464100","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGeekworm N100 Metal Case \/ Enclosure with Power \u0026amp; Reset Control Switch \u0026amp; Camera Holder for Jetson Nano A02\/B01\/2GB\/4GB Jetson Xavier NX\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eUpdate Notification: In November 2020, the N100 case has\nbeen updated to new version N100-V11, we update the case to support the latest\nJetson nano 2GB version, NOW it support Jetson nano A02\/B01\/2GB\/4GB version,\nalso support Jetson Xavier NX. (Note: Please remove the 2pcs metal cover in\nfront of the USB3 and Hdmi port when use N100-V11 with Jetson Nano A02 and B01\nand Jetson Xavier NX.) Maybe there is mixed N100-V9 version, N100-V9 does not\nsupport Jetson nano 2GB version.In March 21st 2020, the N100 case has been\nupdated to new version, the new version support both Jetson nano A02 and B01\nversion. Also we remove the TF card slot in the new version case.The NVIDIA\nJetson Nano Metal Case updated to the second version with 3 holes at the back\ncover on June 7th 2019, the first version is released on May 10th 2019. So if\nyou get the Jetson Nano Case with only one antenna hole at the back cover, it\nmust be the first version, when the first version is sold out, we release the\nsecond version with 3 holes at the back cover. Overview This is a metal case\nspecially designed for NVIDIA Jetson Nano Developer Kit by Geekworm,support\nboth A02 and B01 version and it supports power switch and reset switch,It also\nsupports installation of up to 3 antennas, at the same time, we adjusted the\nsize of the antenna hole based on the previous version so that you can install\nthe official Raspberry Pi official camera only. The diameter of the antenna\nhole is 7.3mm. and it's reserve the GPIO hole and the installation space of\nthe fan, and easily assemble it. We recommend that you read the introduction\nto the power supply in the official documentation before you assemble this\ncase, thus you can understand this case deeply. Note: The NVIDIA Jetson Nano\nDeveloper Kit and antenna are not included, and the 4-pin cooling fan is aslo\nnot included in the packing list! Installation Video for Jetson Nano A02:\nyoutu.be\/SpUB6h4Akp4 Installation Video for Jetson Nano B01\/2GB:\nyoutu.be\/Q5n2Aa_z0qI Installation Video for Jetson Xavier NX:\nyoutu.be\/7Cqr9R04htc Power Supply(Recommend) There is a certificated DC 5V 4A\nPower Adapter with US Plug for NVIDIA Jetson Nano Board, please refer to\nB07413Q5Y4 . FAQ Q1: Why was the MICRO SD card slot cancelled? A: N100-V9 is\ncompatible with both A02 and B01 versions now. We must increase the distance\nbetween the JETSON NANO motherboard and the front panel of the case to install\nthe switch. We found that even if we kept the TF card slot, we couldn't insert\nthe TF card by hand or plastic tweezers, so we have to cancel this card slot;\nWe hope that the official NVIDIA will adjust the position of J50 in subsequent\nversions. For more questions, please refer to the official forum. Q2:How to\nassemble this NVIDIA Jetson Nano case? A: Please refer to the picture on our\nwiki:raspberrypiwiki (N100) Q3: Is it supported to install a cooling fan? A:\nYes, it is support for fan installation, 22mm high fan installation height is\nreserved. It is support to install Noctua NF-A4x20 5V PWM fan (\nB071FNHVXN). (We test this fan it is ok to use and a good choice.) Q4: How do\nI use the jumper cap? A: Because this case has a power switch, you need to\ndisable the AUTO ON function first. Please insert the jumper cap into the AUTO\nON position of the J40 pin to disable the AUTO ON function.(On the back of\nyour board there is words \" AUTO ON DIS\") Q5: Which cooling fan shoud I choose\nfor this case? A: We strongly suggest that you can use this Noctua NF-A4x20 5V\nPWM fan, please refer to B071FNHVXN for the cooling fan (We have prepared the\nmatching screws for this fan in the packing list). Q6: What is the purpose of\nABS Tweezers in the case? A: The ABS Tweezers are use to help install the\ncooling fan on your NVIDIA Jetson Nano Developer Kit , please refer to video:\nyoutu.be\/SpUB6h4Akp4 Q7: Does it support camera installation? A: Yes. It's\nonly support the raspberry pi offical camera, and this camera is recommend by\nNVIDIA. you can insert the camera into the antenna hole. Key Features:\nEquipped with power control switch and reset switch, and it is convenient to\nstart with one button. The power switch has LED indicator. The reset switch is\nplaced on the back to prevent accidential touch. Support to install a cooling\nfan, reserve 22mm high fan installation height, easy to install the official\nrecommend fan. The 3 antenna holes are reserved to faciliate the arrangement\nof the external antenna. (as the antenna in the photo is not included if you\nneed to use you have to buy it yourself) Only the raspberry pi official camera\ncan be inserted into the antenna hole. (Because we don't know the size of the\nothers camera) For Jetson Nano 2GB, please also refer to Jetson Nano B01\nPacking List 1 x N100 Metal Case for NVIDIA Jetson Nano Board 1 x Power\nSwitch(Momentary switch, power on the board) 1 x Reset Switch (Momentary\nswitch, reset the board) 2 x Jumper (Disabled the AUTO ON, and toggle the\npower supply between Micro USB and DC Jack) 1 x Screws Pack 1 x ABS Tweezers\n(It is used to help install the cooling fan on your NVIDIA Jetson Nano board)\nRead more\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA metal case N100 specially designed for Jetson Nano Developer Kit Rev A02 and B01 by Geekworm; New update case verisom with TF card slot has been removed, support Jetson Nano A02\/B01\/2GB\/4GB version, also support Jetson Xavier NX. User manual, search N100 at Geekworm WiKi page.\u003c\/li\u003e\n\u003cli\u003eNote: The Jetson Nano board, antennas and cooling fan are all not included in the packing list.\u003c\/li\u003e\n\u003cli\u003eAbout how to assemble this Geekworm N100 case, refer to Geekworm WiKi search N100 for installation video of Jetson Nano A02\/B01\/2GB\/Jetson Xavier NX.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":7873166016749,"title":"Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","handle":"geekworm-naspi-v2-0-2-5-inch-sata-hdd-ssd-nas-storage-kit-with-safe-shutdown-auto-power-on-function-for-raspberry-pi-4-model-bnot-include-raspberry-pi-4","description":"\u003ch1\u003eGeekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026amp; Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eRead more Note: In May 26th 2022, the NASPi updated to\nNASPi V2.0 version with auto power on function(Update X-C1 adapter from V1.3\nto V2.0 version.)[There maybe mixed version of NASPi in amazon warehouse,\nplease understand this situation if you received NASPi rather than NASPi V2.0.\nThe used NASPi still the old version may not have auto power on function]In\nAugust 17th 2021, the NASPi kit inlcuded X823 shield has been updated from\nV1.3 to V1.5 version. Do not need 2pin power cable since then.In 28th July\n2021, added one backup acrylic front panel to help improve WiFi signal. But\nacrylic material is fragile, be careful for the installation. According to our\ntest 2.4G WIFI is usable. But 5GHz WIFI networks will be more stable. So\nstrongly recommend to use 5GHz WIFI networks or Ethernet. Refer to 5G WIFI\ntest video: youtu.be\/LKJVIBQFYXs; The wireless keyboard we tested usable is\nlogitech K520.The NASPi kit does not include the Raspberry Pi 4 motherboard,\nTF card, 2.5\" SATA SSD\/HDD and power adapter. [Overview] NASPi is a NUC-style\nNAS storage solution based on the latest Raspberry Pi 4 Model\nB(1GB\/2GB\/4GB\/8GB). It supports 2.5-inch sata HDD\/SSD. All the Raspberry Pi 4\ninterfaces are adjusted to the back through the X-C1 adapter board, build in\nsoftware safety shutdown function, using PWM fan can dynamically adjust the\nspeed of the fan according to the temperature of the CPU. The shell is made of\nall aluminum alloy, CNC processing method, surface anodizing\ntreatment.(raspberry pi 4 nas kit\/raspberry pi 4 case ssd slot\/raspberry pi 4\ncase ssd support\/raspberry pi 4 case ssd mount\/raspberry pi 4 case 2.5\nhdd\/raspberry pi 4 case with power button\/pi ssd case) NASPI adopts modular\ndesign, and NASPI is composed of three parts: X823 storage shield, X-C1\nadapter board, heat dissipation system(include X823-A3 metal fan bracket and\n4010 PWM fan), and they will be packed into a ALU-case (raspberry pi ssd\ncase\/raspberry pi 4 case with ssd mount\/raspberry pi 4 hard drive case) to get\na complete NASPi; X823 provides 2.5 inch HDD\/SSD storage function(UASP\nsupported Only);X-C1 V2.0 provides power management, interface adapter, safe\nshutdown and auto power on function(X-C1 V2.0 support auto power on function,\nX-C1 V1.3 doesn't)For the heat dissipation system, we chose a relatively\nsimple and practical heat dissipation solution: a custom metal bracket and a\n4010 PWM fan to achieve it. in fact, you can use P165-B to get same function,\nbut maybe P165-B will have a slight impact on WIFI. [User Manual]\nwiki.geekworm.com\/NASPi (Video based on X823 V1.5:\nyoutu.be\/ithz2Mg5Vrc)wiki.geekworm.com\/X-C1_Software Key Features Ideal\nstorage solution for Raspberry Pi 4 - NASPi 2.5\" SATA HDD\/SSD KitOnly\ncompatible with Raspberry Pi 4 Model BUASP Supported Only for Raspberry Pi\n4Compatible with single 2.5 inch SATA hard disk drives (HDD) \/ solid-state\ndrive (SSD)Support Max 9.8mm thickness 2.5 inch HDD\/SSD (The thickness of 2.5\"\nHDD\/SSD on the market is generally 7mm, 9.5mm, 12.5 and 15mm，You only can\nchoose 7mm or 9.5mm thickness HDD\/SSD)Allows booting OS from your HDD\/SSD for\nfaster app opens, web serving and file copyingPress button switch to turn\nonPress button switch and hold for 1~2 seconds to rebootPress button switch\nand hold for 3 seconds to implement safe shutdownPress button switch and hold\nfor more than 8 seconds to force shutdownSupport auto power on function with\nX-C1 V2.0 adapter(X-C1 V1.3 do not support auto power on)Small and exquisite\naluminum alloy case reserve the power button port, Type-C power supply port\nfor use FAQ Q1. Will the Alu case affect the WIFI? A: As our test, 2.4G WIFI\nAP was usable. But different Raspberry Pi individuals have different degrees\nof WIFI interference. As well as aluminum alloy case will interfere with pi\n4’s WIFI to a certain extent. 2.4G WIFI maybe unstable. So it is strongly\nrecommend to use Ethernet or 5G AP. Refer to 5G WiFi test video:\nyoutu.be\/LKJVIBQFYXs Q2: What is the thickness of a 2.5\" HDD\/SSD that can be\naccommodated? A: The thickness of 2.5\" HDD\/SSD on the market is generally 7mm,\n9.5mm, 12.5 and 15mm，You only can choose 7mm or 9.5mm thickness HDD\/SSD, NASPi\nis not compatible with 12.5mm and 15mm thickness 2.5\" HDD\/SSD.The thickness of\n2.5\" HDD\/SSD should not exceed 9.8mm. In fact, most 2.5\" HDD\/SSD on the market\nare only 7mm thick. Q3: Is it OK to use wirless keyboard or mouse? A:\nAccording to our test, it is OK to use the keyboard and mouse. Refer to video:\nyoutu.be\/LKJVIBQFYXs, we use the wireless logitech K520 keyboard and mouse.\nQ4: How to find and use the Raspberry Pi 4 5G AP? A: Please refer to here\nfollow the steps: wiki.geekworm.com\/Raspberry_pi_4_can%27t_find_5ghz_wifi Q5:\nHow to make the PWM cooling fan running? A: You will need to install the shell\nscript to make the cooling fan run, please refer to:\nwiki.geekworm.com\/X-C1_Software We can manually run the following commands:\nsudo python \/home\/pi\/x-c1\/x-c1_pwm_fan_control.py\u0026amp; Then the pwm fan will start\nworking. Q6: How to adjust the PWM fan speed to get better heat dissipation?\nA: You can modify the x-c1_pwm_fan_control.py file if value to adjust the\nspeed of PWM fan. Range of value: 0 ~ 100 0: fan stop 100: fan is full speed.\nRefer to photo: wiki.geekworm.com\/File:Adjust-fan-fan.png Q7: How to make the\nPWM cooling fan always running if you use the third party system? A: The PWM\ncooling fan is 3pin with yellow, black and red wire, you just need to pull out\nor cut the yellow wire to make the cooling fan always running. Q8: Is the PWM\ncooling fan heat dissipation enough for the NASPi kit? A: According to our\ntest, based on Raspberry Pi4 2GB, OS is 2021-05-07-raspios-buster-armhf.img,\nprogram running time exceeds 30 minutes. The 4 CPU cores are running at full\nload, the maximum temperature of the CPU core does not exceed 75 degrees, and\nthe surface of the shell does not generate heat, which meets the design\nrequirements. Q9: What is the read\/write performance when used as a NAS? A:\nThe read and write performance is determined by the speed of the Raspberry\nPi’s USB 3 bus and SSD. It should be noted that the Raspberry Pi’s USB3\nbandwidth is only 3Gbps. Normally, the R\/W speed is about 300MB\/S. For X823\nV1.5-Added test pins, remove the 2pin power cable How to Power NASPi Power\nsupply: 5Vdc +\/-5% , ≥4A (Via Type-C Port of X-C1) We recommend that you use\nGeekworm UL listed 5V 4A Type-C power adapter(B09J856PND). How to make\nthe PWM cooling fan always running if you use the third party system? A: The\nPWM cooling fan is 3pin with yellow, black and red wire, you just need to pull\nout or cut the yellow wire to make the cooling fan always running. About NASPi\nstress test, refer to: wiki.geekworm.com\/Naspi_stress_test Test result The 4\nCPU cores are running at full load, the maximum temperature of the CPU core\ndoes not exceed 75 degrees, and the surface of the shell does not generate\nheat, which meets the design requirements. Installation Video Guide for NASPi:\nyoutu.be\/RQGYf6Fqf6s NASPi Interface Diagram About feedback of the fan vent is\nnot perfectly aligned with the PWM fan, it has been updated since 2021. About\nPWM Cooling Fan How to make the PWM cooling fan running? You will need to\ninstall the shell script to make the cooling fan run, please refer to:\nwiki.geekworm.com\/X-C1_Software We can manually run the following commands:\nsudo python \/home\/pi\/x-c1\/x-c1_pwm_fan_control.py\u0026amp; Then the pwm fan will start\nworking. Some information about the fan: 1. The fan is very silent, and it is\nnot easy to hear the sound of the fan; 2. The fan is a PWM fan which\ndynamically adjusts the speed according to the temperature of the CPU. If the\ntemperature of the CPU is low, the speed of the fan is extremely low, and it\nis not easy to hear the sound of the fan; 3. The fan hole of the NASPi case is\nnot directly align with the fan, so it is not easy to find whether the fan is\nrunning. (We will adjust the position of the fan hole in the next version). 4.\nOnly when the CPU temperature reaches 65 degrees or more, the fan will run at\nfull speed, and you may be able to hear the sound of the fan; 5. The fan is\ncontrolled by the PWM signal. The fan will only run after the ‘python\n\/home\/pi\/x-c1\/fan.py\u0026amp;’ command runs successfully; you can run the following\ncommand to check whether the fan is running; sudo jobs Packing List 1 x NASPi\nAlu case(Update fan vent position to align with PWM fan well)1 X X823 V1.5\nShield (Addes test pins, remove the 2PIN cable)1 x X-C1 V2.0 adapter board1 x\nX823-A3 metal bracket+4010 PWM fanScews pack accessories; Read more NASPi VS\nNASPi-Lite VS NASPi-Gemini NASPi 2.5 inch SATA HDD\/SSD NAS Storage Kit with\nSafe Shutdown Function for Raspberry Pi 4 Model B( B095YCL7S8) Support\nsingle 2.5 inch SATA HDD\/SSDWith safeshutdown function by X-C1With auto power\non function by X-C1 V2.0With 3pin PWM cooling fanNeed to install the shell\nscript to useDO NOT support auto power on function NASPi-Lite 2.5 inch SATA\nHDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B( B09J8B7G3W) Support\nsingle 2.5 inch SATA HDD\/SSDNot support safeshutdownwith 2pin normal cooling\nfanWith one full size hdmi-port Do not need to install shell scriptDO NOT\nsupport auto power on function NASPi-Gemini Dual 2.5'' SATA HDD\/SSD NAS\nStorage Kit( B07VXF2HJG) Support DUAL 2.5 inch SATA HDD\/SSDWith\nsafeshutdown functionWith 3pin PWM cooling fanNeed to install the shell script\nto useSupport auto power on functionSupport RAID function Read more\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNASPI is composed of three parts: X823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case to get a complete NASPi; (X-C1 V2.0 support auto power on function, X-C1 V1.3 doesn't)\u003c\/li\u003e\n\u003cli\u003eSSD thickness description: NASPi supports SSD with a thickness not exceeding 9.8mm, most 2.5\" HDD\/SSD on the market are only 7mm thickness.\u003c\/li\u003e\n\u003cli\u003eButton switch operation: Press button 1~2 seconds to reboot, 3 seconds to safe shutdown, 8 seconds to force shutdown (need to install shell script firstly)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-05T17:08:59+10:00","created_at":"2022-08-05T17:09:10+10:00","vendor":"Geekworm","type":"Single Board Computers","tags":["electronics"],"price":27000,"price_min":27000,"price_max":27000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43091655819501,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B095YCL7S8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","public_title":null,"options":["Default Title"],"price":27000,"weight":476,"compare_at_price":null,"inventory_management":null,"barcode":"NASPi","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/51WMX-osW9L.jpg?v=1659683350","\/\/leoforward.com\/cdn\/shop\/products\/718K4Qq7BtL.jpg?v=1659683350","\/\/leoforward.com\/cdn\/shop\/products\/81PZX_0_NVL.jpg?v=1659683350","\/\/leoforward.com\/cdn\/shop\/products\/81zQV-usbtL_c175630b-4540-41d2-b355-cabf6cad4573.jpg?v=1659683350","\/\/leoforward.com\/cdn\/shop\/products\/718s5DlEwPL_c76bc397-4f3c-4ff9-b472-b607adeb98c3.jpg?v=1659683350","\/\/leoforward.com\/cdn\/shop\/products\/71HvzNreccL.jpg?v=1659683350","\/\/leoforward.com\/cdn\/shop\/products\/81P9qT4tWeS_aba663f4-56b8-4a3d-bbeb-1486713459c2.jpg?v=1659683350","\/\/leoforward.com\/cdn\/shop\/products\/71hoR3VpdxL_6d205c80-5385-44ed-90db-2485b5ed7ea2.jpg?v=1659683350","\/\/leoforward.com\/cdn\/shop\/products\/81O6zCBDQOL.jpg?v=1659683350"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/51WMX-osW9L.jpg?v=1659683350","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195661144301,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2001,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51WMX-osW9L.jpg?v=1659683350"},"aspect_ratio":1.0,"height":2001,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51WMX-osW9L.jpg?v=1659683350","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195661177069,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/718K4Qq7BtL.jpg?v=1659683350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/718K4Qq7BtL.jpg?v=1659683350","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195661209837,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81PZX_0_NVL.jpg?v=1659683350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81PZX_0_NVL.jpg?v=1659683350","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195661242605,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81zQV-usbtL_c175630b-4540-41d2-b355-cabf6cad4573.jpg?v=1659683350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81zQV-usbtL_c175630b-4540-41d2-b355-cabf6cad4573.jpg?v=1659683350","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195661275373,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/718s5DlEwPL_c76bc397-4f3c-4ff9-b472-b607adeb98c3.jpg?v=1659683350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/718s5DlEwPL_c76bc397-4f3c-4ff9-b472-b607adeb98c3.jpg?v=1659683350","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195661308141,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71HvzNreccL.jpg?v=1659683350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71HvzNreccL.jpg?v=1659683350","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195661340909,"position":7,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81P9qT4tWeS_aba663f4-56b8-4a3d-bbeb-1486713459c2.jpg?v=1659683350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81P9qT4tWeS_aba663f4-56b8-4a3d-bbeb-1486713459c2.jpg?v=1659683350","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195661373677,"position":8,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71hoR3VpdxL_6d205c80-5385-44ed-90db-2485b5ed7ea2.jpg?v=1659683350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71hoR3VpdxL_6d205c80-5385-44ed-90db-2485b5ed7ea2.jpg?v=1659683350","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026 Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195661406445,"position":9,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81O6zCBDQOL.jpg?v=1659683350"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81O6zCBDQOL.jpg?v=1659683350","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGeekworm NASPi V2.0 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown \u0026amp; Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eRead more Note: In May 26th 2022, the NASPi updated to\nNASPi V2.0 version with auto power on function(Update X-C1 adapter from V1.3\nto V2.0 version.)[There maybe mixed version of NASPi in amazon warehouse,\nplease understand this situation if you received NASPi rather than NASPi V2.0.\nThe used NASPi still the old version may not have auto power on function]In\nAugust 17th 2021, the NASPi kit inlcuded X823 shield has been updated from\nV1.3 to V1.5 version. Do not need 2pin power cable since then.In 28th July\n2021, added one backup acrylic front panel to help improve WiFi signal. But\nacrylic material is fragile, be careful for the installation. According to our\ntest 2.4G WIFI is usable. But 5GHz WIFI networks will be more stable. So\nstrongly recommend to use 5GHz WIFI networks or Ethernet. Refer to 5G WIFI\ntest video: youtu.be\/LKJVIBQFYXs; The wireless keyboard we tested usable is\nlogitech K520.The NASPi kit does not include the Raspberry Pi 4 motherboard,\nTF card, 2.5\" SATA SSD\/HDD and power adapter. [Overview] NASPi is a NUC-style\nNAS storage solution based on the latest Raspberry Pi 4 Model\nB(1GB\/2GB\/4GB\/8GB). It supports 2.5-inch sata HDD\/SSD. All the Raspberry Pi 4\ninterfaces are adjusted to the back through the X-C1 adapter board, build in\nsoftware safety shutdown function, using PWM fan can dynamically adjust the\nspeed of the fan according to the temperature of the CPU. The shell is made of\nall aluminum alloy, CNC processing method, surface anodizing\ntreatment.(raspberry pi 4 nas kit\/raspberry pi 4 case ssd slot\/raspberry pi 4\ncase ssd support\/raspberry pi 4 case ssd mount\/raspberry pi 4 case 2.5\nhdd\/raspberry pi 4 case with power button\/pi ssd case) NASPI adopts modular\ndesign, and NASPI is composed of three parts: X823 storage shield, X-C1\nadapter board, heat dissipation system(include X823-A3 metal fan bracket and\n4010 PWM fan), and they will be packed into a ALU-case (raspberry pi ssd\ncase\/raspberry pi 4 case with ssd mount\/raspberry pi 4 hard drive case) to get\na complete NASPi; X823 provides 2.5 inch HDD\/SSD storage function(UASP\nsupported Only);X-C1 V2.0 provides power management, interface adapter, safe\nshutdown and auto power on function(X-C1 V2.0 support auto power on function,\nX-C1 V1.3 doesn't)For the heat dissipation system, we chose a relatively\nsimple and practical heat dissipation solution: a custom metal bracket and a\n4010 PWM fan to achieve it. in fact, you can use P165-B to get same function,\nbut maybe P165-B will have a slight impact on WIFI. [User Manual]\nwiki.geekworm.com\/NASPi (Video based on X823 V1.5:\nyoutu.be\/ithz2Mg5Vrc)wiki.geekworm.com\/X-C1_Software Key Features Ideal\nstorage solution for Raspberry Pi 4 - NASPi 2.5\" SATA HDD\/SSD KitOnly\ncompatible with Raspberry Pi 4 Model BUASP Supported Only for Raspberry Pi\n4Compatible with single 2.5 inch SATA hard disk drives (HDD) \/ solid-state\ndrive (SSD)Support Max 9.8mm thickness 2.5 inch HDD\/SSD (The thickness of 2.5\"\nHDD\/SSD on the market is generally 7mm, 9.5mm, 12.5 and 15mm，You only can\nchoose 7mm or 9.5mm thickness HDD\/SSD)Allows booting OS from your HDD\/SSD for\nfaster app opens, web serving and file copyingPress button switch to turn\nonPress button switch and hold for 1~2 seconds to rebootPress button switch\nand hold for 3 seconds to implement safe shutdownPress button switch and hold\nfor more than 8 seconds to force shutdownSupport auto power on function with\nX-C1 V2.0 adapter(X-C1 V1.3 do not support auto power on)Small and exquisite\naluminum alloy case reserve the power button port, Type-C power supply port\nfor use FAQ Q1. Will the Alu case affect the WIFI? A: As our test, 2.4G WIFI\nAP was usable. But different Raspberry Pi individuals have different degrees\nof WIFI interference. As well as aluminum alloy case will interfere with pi\n4’s WIFI to a certain extent. 2.4G WIFI maybe unstable. So it is strongly\nrecommend to use Ethernet or 5G AP. Refer to 5G WiFi test video:\nyoutu.be\/LKJVIBQFYXs Q2: What is the thickness of a 2.5\" HDD\/SSD that can be\naccommodated? A: The thickness of 2.5\" HDD\/SSD on the market is generally 7mm,\n9.5mm, 12.5 and 15mm，You only can choose 7mm or 9.5mm thickness HDD\/SSD, NASPi\nis not compatible with 12.5mm and 15mm thickness 2.5\" HDD\/SSD.The thickness of\n2.5\" HDD\/SSD should not exceed 9.8mm. In fact, most 2.5\" HDD\/SSD on the market\nare only 7mm thick. Q3: Is it OK to use wirless keyboard or mouse? A:\nAccording to our test, it is OK to use the keyboard and mouse. Refer to video:\nyoutu.be\/LKJVIBQFYXs, we use the wireless logitech K520 keyboard and mouse.\nQ4: How to find and use the Raspberry Pi 4 5G AP? A: Please refer to here\nfollow the steps: wiki.geekworm.com\/Raspberry_pi_4_can%27t_find_5ghz_wifi Q5:\nHow to make the PWM cooling fan running? A: You will need to install the shell\nscript to make the cooling fan run, please refer to:\nwiki.geekworm.com\/X-C1_Software We can manually run the following commands:\nsudo python \/home\/pi\/x-c1\/x-c1_pwm_fan_control.py\u0026amp; Then the pwm fan will start\nworking. Q6: How to adjust the PWM fan speed to get better heat dissipation?\nA: You can modify the x-c1_pwm_fan_control.py file if value to adjust the\nspeed of PWM fan. Range of value: 0 ~ 100 0: fan stop 100: fan is full speed.\nRefer to photo: wiki.geekworm.com\/File:Adjust-fan-fan.png Q7: How to make the\nPWM cooling fan always running if you use the third party system? A: The PWM\ncooling fan is 3pin with yellow, black and red wire, you just need to pull out\nor cut the yellow wire to make the cooling fan always running. Q8: Is the PWM\ncooling fan heat dissipation enough for the NASPi kit? A: According to our\ntest, based on Raspberry Pi4 2GB, OS is 2021-05-07-raspios-buster-armhf.img,\nprogram running time exceeds 30 minutes. The 4 CPU cores are running at full\nload, the maximum temperature of the CPU core does not exceed 75 degrees, and\nthe surface of the shell does not generate heat, which meets the design\nrequirements. Q9: What is the read\/write performance when used as a NAS? A:\nThe read and write performance is determined by the speed of the Raspberry\nPi’s USB 3 bus and SSD. It should be noted that the Raspberry Pi’s USB3\nbandwidth is only 3Gbps. Normally, the R\/W speed is about 300MB\/S. For X823\nV1.5-Added test pins, remove the 2pin power cable How to Power NASPi Power\nsupply: 5Vdc +\/-5% , ≥4A (Via Type-C Port of X-C1) We recommend that you use\nGeekworm UL listed 5V 4A Type-C power adapter(B09J856PND). How to make\nthe PWM cooling fan always running if you use the third party system? A: The\nPWM cooling fan is 3pin with yellow, black and red wire, you just need to pull\nout or cut the yellow wire to make the cooling fan always running. About NASPi\nstress test, refer to: wiki.geekworm.com\/Naspi_stress_test Test result The 4\nCPU cores are running at full load, the maximum temperature of the CPU core\ndoes not exceed 75 degrees, and the surface of the shell does not generate\nheat, which meets the design requirements. Installation Video Guide for NASPi:\nyoutu.be\/RQGYf6Fqf6s NASPi Interface Diagram About feedback of the fan vent is\nnot perfectly aligned with the PWM fan, it has been updated since 2021. About\nPWM Cooling Fan How to make the PWM cooling fan running? You will need to\ninstall the shell script to make the cooling fan run, please refer to:\nwiki.geekworm.com\/X-C1_Software We can manually run the following commands:\nsudo python \/home\/pi\/x-c1\/x-c1_pwm_fan_control.py\u0026amp; Then the pwm fan will start\nworking. Some information about the fan: 1. The fan is very silent, and it is\nnot easy to hear the sound of the fan; 2. The fan is a PWM fan which\ndynamically adjusts the speed according to the temperature of the CPU. If the\ntemperature of the CPU is low, the speed of the fan is extremely low, and it\nis not easy to hear the sound of the fan; 3. The fan hole of the NASPi case is\nnot directly align with the fan, so it is not easy to find whether the fan is\nrunning. (We will adjust the position of the fan hole in the next version). 4.\nOnly when the CPU temperature reaches 65 degrees or more, the fan will run at\nfull speed, and you may be able to hear the sound of the fan; 5. The fan is\ncontrolled by the PWM signal. The fan will only run after the ‘python\n\/home\/pi\/x-c1\/fan.py\u0026amp;’ command runs successfully; you can run the following\ncommand to check whether the fan is running; sudo jobs Packing List 1 x NASPi\nAlu case(Update fan vent position to align with PWM fan well)1 X X823 V1.5\nShield (Addes test pins, remove the 2PIN cable)1 x X-C1 V2.0 adapter board1 x\nX823-A3 metal bracket+4010 PWM fanScews pack accessories; Read more NASPi VS\nNASPi-Lite VS NASPi-Gemini NASPi 2.5 inch SATA HDD\/SSD NAS Storage Kit with\nSafe Shutdown Function for Raspberry Pi 4 Model B( B095YCL7S8) Support\nsingle 2.5 inch SATA HDD\/SSDWith safeshutdown function by X-C1With auto power\non function by X-C1 V2.0With 3pin PWM cooling fanNeed to install the shell\nscript to useDO NOT support auto power on function NASPi-Lite 2.5 inch SATA\nHDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B( B09J8B7G3W) Support\nsingle 2.5 inch SATA HDD\/SSDNot support safeshutdownwith 2pin normal cooling\nfanWith one full size hdmi-port Do not need to install shell scriptDO NOT\nsupport auto power on function NASPi-Gemini Dual 2.5'' SATA HDD\/SSD NAS\nStorage Kit( B07VXF2HJG) Support DUAL 2.5 inch SATA HDD\/SSDWith\nsafeshutdown functionWith 3pin PWM cooling fanNeed to install the shell script\nto useSupport auto power on functionSupport RAID function Read more\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNASPI is composed of three parts: X823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case to get a complete NASPi; (X-C1 V2.0 support auto power on function, X-C1 V1.3 doesn't)\u003c\/li\u003e\n\u003cli\u003eSSD thickness description: NASPi supports SSD with a thickness not exceeding 9.8mm, most 2.5\" HDD\/SSD on the market are only 7mm thickness.\u003c\/li\u003e\n\u003cli\u003eButton switch operation: Press button 1~2 seconds to reboot, 3 seconds to safe shutdown, 8 seconds to force shutdown (need to install shell script firstly)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":7873214251245,"title":"Geekworm NASPi-Lite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","handle":"geekworm-naspi-lite-2-5-inch-sata-hdd-ssd-nas-storage-kit-for-raspberry-pi-4-model-bnot-include-raspberry-pi-4","description":"\u003ch1\u003eGeekworm NASPi-Lite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eWhat's the difference between NASPi and NASPi Lite? 1.\nNASPi-Lite use normal 5V 2pin cooling fan, fan speed is not adjustable; NASPi\nuse 5V PWM cooling fan, fan speed is adjustable. 2. NASPi-Lite use X-C2\nadpater board with one full size hdmi-port, not support software shutdown;\nNASPi use X-C1 adpater board with software shutdown function. 3. NASPi use\n7pin cable and NASPi-Lite use 2 pin cable. Note: The NASPi-Lite kit does not\ninclude the Raspberry Pi 4 motherboard, TF card, 2.5\" SATA SSD\/HDD and power\nadapter. [Overview] NASPi Lite is a simplified version of NASPi, which replace\nthe NASPi X-C1 adapter board with X-C2 adapter board. The X-C2 adapter board\nhas one full size hdmi-port for easy application, also remove the software\nshutdown function from X-C2. NASPi Lite is a NUC-style 2.5\" sata case for\nRaspberry Pi 4 model b 8gb\/4gb\/2gb\/1gb. It supports 2.5 inch sata HDD\/SSD. The\nshell is made of all aluminum alloy, CNC processing method, surface anodizing\ntreatment. NASPI-Lite adopts modular design, and NASPI-Lite is composed of\nthree parts: X823 V1.5 storage shield, X-C2 adapter board, heat dissipation\nsystem(include X823-A3 metal fan bracket and 4010 2Pin cooling fan), and they\nwill be packed into a ALU-case to get a complete NASPi Lite; X823 provides 2.5\ninch HDD\/SSD storage function(UASP supported); X-C2 provides power management\nand interface adapter function but not support software shutdown. For the heat\ndissipation system, we chose a relatively simple and practical heat\ndissipation solution: a custom metal bracket and a 4010 2Pin cooling fan to\nachieve it. User Manual: wiki.geekworm.com\/NASPi_Lite Installation Video:\nyoutu.be\/WRs7P7rLVJM [Key Features] Ideal storage solution for Raspberry Pi 4\n- NASPi-Lite 2.5\" SATA HDD\/SSD KitOnly compatible with Raspberry Pi 4 Model\nBUASP Supported Only for Raspberry Pi 4Compatible with single 2.5 inch SATA\nhard disk drives (HDD) \/ solid-state drive (SSD)Support Max 9.8mm thickness\n2.5 inch HDD\/SSD (The thickness of 2.5\" HDD\/SSD on the market is generally\n7mm, 9.5mm, 12.5 and 15mm，You only can choose 7mm or 9.5mm thickness\nHDD\/SSD)Press button switch to turn onPress button switch and hold to force\nshutdownDO NOT support software shutdownAllows booting OS from your HDD\/SSD\nfor faster app opens, web serving and file copyingSmall and exquisite aluminum\nalloy case reserve the power button port, type-C power supply port for use\nNASPi-Lite Inner View How to Power NASPi-Lite Power supply: 5Vdc +\/-5% , ≥4A\n(Via Type-C Port) Recommend to use Geekworm UL listed 20W 5V 4A Type-C power\nadapter( B09J856PND). About NASPi stress test, refer to:\nwiki.geekworm.com\/Naspi_stress_test Test result The 4 CPU cores are running at\nfull load, the maximum temperature of the CPU core does not exceed 75 degrees,\nand the surface of the shell does not generate heat, which meets the design\nrequirements. Installation Video Guide: youtu.be\/RQGYf6Fqf6s [FAQ] Q1. Will\nthe Alu case affect the WIFI? A: As our test, 2.4G WIFI AP was usable. But\ndifferent Raspberry Pi individuals have different degrees of WIFI\ninterference. As well as aluminum alloy case will interfere with pi 4’s WIFI\nto a certain extent. 2.4G WIFI maybe unstable. So it is strongly recommend to\nuse Ethernet or 5G AP. Refer to 5G WiFi test video: youtu.be\/LKJVIBQFYXs Q2:\nWhat is the thickness of a 2.5\" HDD\/SSD that can be accommodated? A: The\nthickness of 2.5\" HDD\/SSD on the market is generally 7mm, 9.5mm, 12.5 and\n15mm，You only can choose 7mm or 9.5mm thickness HDD\/SSD, NASPi is not\ncompatible with 12.5mm and 15mm thickness 2.5\" HDD\/SSD.The thickness of 2.5\"\nHDD\/SSD should not exceed 9.8mm. In fact, most 2.5\" HDD\/SSD on the market are\nonly 7mm thick. Q3: Is it OK to use wirless keyboard or mouse? A: According to\nour test, it is OK to use the keyboard and mouse. Refer to video:\nyoutu.be\/LKJVIBQFYXs, we use the wireless logitech K520 keyboard and mouse.\nQ4: How to find and use the Raspberry Pi 4 5G AP? A: Please refer to here\nfollow the steps: wiki.geekworm.com\/Raspberry_pi_4_can%27t_find_5ghz_wifi\nPacking List 1 x NASPi-Lite Alu case1 X X823 V1.5 Shield (Addes test pins,\nremove the 2PIN cable)1 x X-C2 V1.0 adapter board1 x X823-A3 metal\nbracket+4010 cooling fanScews pack accessories; Read more NASPi VS NASPi-Lite\nVS NASPi Gemini NASPi 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown\nFunction for Raspberry Pi 4 Model B( B095YCL7S8) Support single 2.5 inch\nSATA HDD\/SSDWith safeshutdown function by X-C1With 3pin PWM cooling fanNeed to\ninstall the shell script to useDO NOT support auto power on function NASPi-\nLite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(\nB09J8B7G3W) Support single 2.5 inch SATA HDD\/SSDNot support safeshutdownwith\n2pin normal cooling fanWith one full size hdmi-portDo not need to install\nshell scriptDO NOT support auto power on function NASPi-Gemini Dual 2.5'' SATA\nHDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B( B07VXF2HJG) Support\nDUAL 2.5 inch SATA HDD\/SSDWith safeshutdown functionWith 3pin PWM cooling\nfanNeed to install the shell script to useSupport auto power on\nfunctionSupport RAID function Read more\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeekworm NASPi-Lite offering an easy and fast way to create your home media center and building NAS or Web server for your raspberry pi 4 with a 2.5 inch SATA HDD\/SSD. Note: NASPi Lite does not support software shutdown.\u003c\/li\u003e\n\u003cli\u003eNASPi-Lite is composed of three parts: X823 V1.5 storage shield, X-C2 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 fan), and they will be packed into a ALU-case to get a complete NASPi Lite;\u003c\/li\u003e\n\u003cli\u003eSSD\/HDD Thickness Supported NASPi Lite supports SSD with a thickness not exceeding 9.8mm, most 2.5\" HDD\/SSD on the market are only 7mm thickness.\u003c\/li\u003e\n\u003cli\u003eWifi Description5G WiFi is stable enough, recommend using Ethernet or 5G WiFi.\u003c\/li\u003e\n\u003cli\u003eX-C2 Adapter Boardwith one full size hdmi-port, not support software shutdown function, use normal 5V 2pin cooling fan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-05T17:35:59+10:00","created_at":"2022-08-05T17:36:07+10:00","vendor":"Geekworm","type":"Single Board Computers","tags":["electronics"],"price":26000,"price_min":26000,"price_max":26000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43091728531693,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B09J8B7G3W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm NASPi-Lite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","public_title":null,"options":["Default Title"],"price":26000,"weight":372,"compare_at_price":null,"inventory_management":null,"barcode":"TB-2021-36","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/61i598FbuIL.jpg?v=1659684967","\/\/leoforward.com\/cdn\/shop\/products\/71xEcDsntIL.jpg?v=1659684967","\/\/leoforward.com\/cdn\/shop\/products\/71vT0HVHy9L.jpg?v=1659684967","\/\/leoforward.com\/cdn\/shop\/products\/71LwSFvznjL.jpg?v=1659684967","\/\/leoforward.com\/cdn\/shop\/products\/81uUmSsBnxL.jpg?v=1659684967","\/\/leoforward.com\/cdn\/shop\/products\/71XCin6fG4L.jpg?v=1659684967"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/61i598FbuIL.jpg?v=1659684967","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Geekworm NASPi-Lite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195811057901,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61i598FbuIL.jpg?v=1659684967"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61i598FbuIL.jpg?v=1659684967","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi-Lite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195811090669,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71xEcDsntIL.jpg?v=1659684967"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71xEcDsntIL.jpg?v=1659684967","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi-Lite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195811123437,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71vT0HVHy9L.jpg?v=1659684967"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71vT0HVHy9L.jpg?v=1659684967","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi-Lite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195811156205,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71LwSFvznjL.jpg?v=1659684967"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71LwSFvznjL.jpg?v=1659684967","width":2000},{"alt":" [AUSTRALIA] - Geekworm NASPi-Lite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195811188973,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2001,"width":2001,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81uUmSsBnxL.jpg?v=1659684967"},"aspect_ratio":1.0,"height":2001,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81uUmSsBnxL.jpg?v=1659684967","width":2001},{"alt":" [AUSTRALIA] - Geekworm NASPi-Lite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)","id":30195811221741,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71XCin6fG4L.jpg?v=1659684967"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71XCin6fG4L.jpg?v=1659684967","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGeekworm NASPi-Lite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003eWhat's the difference between NASPi and NASPi Lite? 1.\nNASPi-Lite use normal 5V 2pin cooling fan, fan speed is not adjustable; NASPi\nuse 5V PWM cooling fan, fan speed is adjustable. 2. NASPi-Lite use X-C2\nadpater board with one full size hdmi-port, not support software shutdown;\nNASPi use X-C1 adpater board with software shutdown function. 3. NASPi use\n7pin cable and NASPi-Lite use 2 pin cable. Note: The NASPi-Lite kit does not\ninclude the Raspberry Pi 4 motherboard, TF card, 2.5\" SATA SSD\/HDD and power\nadapter. [Overview] NASPi Lite is a simplified version of NASPi, which replace\nthe NASPi X-C1 adapter board with X-C2 adapter board. The X-C2 adapter board\nhas one full size hdmi-port for easy application, also remove the software\nshutdown function from X-C2. NASPi Lite is a NUC-style 2.5\" sata case for\nRaspberry Pi 4 model b 8gb\/4gb\/2gb\/1gb. It supports 2.5 inch sata HDD\/SSD. The\nshell is made of all aluminum alloy, CNC processing method, surface anodizing\ntreatment. NASPI-Lite adopts modular design, and NASPI-Lite is composed of\nthree parts: X823 V1.5 storage shield, X-C2 adapter board, heat dissipation\nsystem(include X823-A3 metal fan bracket and 4010 2Pin cooling fan), and they\nwill be packed into a ALU-case to get a complete NASPi Lite; X823 provides 2.5\ninch HDD\/SSD storage function(UASP supported); X-C2 provides power management\nand interface adapter function but not support software shutdown. For the heat\ndissipation system, we chose a relatively simple and practical heat\ndissipation solution: a custom metal bracket and a 4010 2Pin cooling fan to\nachieve it. User Manual: wiki.geekworm.com\/NASPi_Lite Installation Video:\nyoutu.be\/WRs7P7rLVJM [Key Features] Ideal storage solution for Raspberry Pi 4\n- NASPi-Lite 2.5\" SATA HDD\/SSD KitOnly compatible with Raspberry Pi 4 Model\nBUASP Supported Only for Raspberry Pi 4Compatible with single 2.5 inch SATA\nhard disk drives (HDD) \/ solid-state drive (SSD)Support Max 9.8mm thickness\n2.5 inch HDD\/SSD (The thickness of 2.5\" HDD\/SSD on the market is generally\n7mm, 9.5mm, 12.5 and 15mm，You only can choose 7mm or 9.5mm thickness\nHDD\/SSD)Press button switch to turn onPress button switch and hold to force\nshutdownDO NOT support software shutdownAllows booting OS from your HDD\/SSD\nfor faster app opens, web serving and file copyingSmall and exquisite aluminum\nalloy case reserve the power button port, type-C power supply port for use\nNASPi-Lite Inner View How to Power NASPi-Lite Power supply: 5Vdc +\/-5% , ≥4A\n(Via Type-C Port) Recommend to use Geekworm UL listed 20W 5V 4A Type-C power\nadapter( B09J856PND). About NASPi stress test, refer to:\nwiki.geekworm.com\/Naspi_stress_test Test result The 4 CPU cores are running at\nfull load, the maximum temperature of the CPU core does not exceed 75 degrees,\nand the surface of the shell does not generate heat, which meets the design\nrequirements. Installation Video Guide: youtu.be\/RQGYf6Fqf6s [FAQ] Q1. Will\nthe Alu case affect the WIFI? A: As our test, 2.4G WIFI AP was usable. But\ndifferent Raspberry Pi individuals have different degrees of WIFI\ninterference. As well as aluminum alloy case will interfere with pi 4’s WIFI\nto a certain extent. 2.4G WIFI maybe unstable. So it is strongly recommend to\nuse Ethernet or 5G AP. Refer to 5G WiFi test video: youtu.be\/LKJVIBQFYXs Q2:\nWhat is the thickness of a 2.5\" HDD\/SSD that can be accommodated? A: The\nthickness of 2.5\" HDD\/SSD on the market is generally 7mm, 9.5mm, 12.5 and\n15mm，You only can choose 7mm or 9.5mm thickness HDD\/SSD, NASPi is not\ncompatible with 12.5mm and 15mm thickness 2.5\" HDD\/SSD.The thickness of 2.5\"\nHDD\/SSD should not exceed 9.8mm. In fact, most 2.5\" HDD\/SSD on the market are\nonly 7mm thick. Q3: Is it OK to use wirless keyboard or mouse? A: According to\nour test, it is OK to use the keyboard and mouse. Refer to video:\nyoutu.be\/LKJVIBQFYXs, we use the wireless logitech K520 keyboard and mouse.\nQ4: How to find and use the Raspberry Pi 4 5G AP? A: Please refer to here\nfollow the steps: wiki.geekworm.com\/Raspberry_pi_4_can%27t_find_5ghz_wifi\nPacking List 1 x NASPi-Lite Alu case1 X X823 V1.5 Shield (Addes test pins,\nremove the 2PIN cable)1 x X-C2 V1.0 adapter board1 x X823-A3 metal\nbracket+4010 cooling fanScews pack accessories; Read more NASPi VS NASPi-Lite\nVS NASPi Gemini NASPi 2.5 inch SATA HDD\/SSD NAS Storage Kit with Safe Shutdown\nFunction for Raspberry Pi 4 Model B( B095YCL7S8) Support single 2.5 inch\nSATA HDD\/SSDWith safeshutdown function by X-C1With 3pin PWM cooling fanNeed to\ninstall the shell script to useDO NOT support auto power on function NASPi-\nLite 2.5 inch SATA HDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B(\nB09J8B7G3W) Support single 2.5 inch SATA HDD\/SSDNot support safeshutdownwith\n2pin normal cooling fanWith one full size hdmi-portDo not need to install\nshell scriptDO NOT support auto power on function NASPi-Gemini Dual 2.5'' SATA\nHDD\/SSD NAS Storage Kit for Raspberry Pi 4 Model B( B07VXF2HJG) Support\nDUAL 2.5 inch SATA HDD\/SSDWith safeshutdown functionWith 3pin PWM cooling\nfanNeed to install the shell script to useSupport auto power on\nfunctionSupport RAID function Read more\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeekworm NASPi-Lite offering an easy and fast way to create your home media center and building NAS or Web server for your raspberry pi 4 with a 2.5 inch SATA HDD\/SSD. Note: NASPi Lite does not support software shutdown.\u003c\/li\u003e\n\u003cli\u003eNASPi-Lite is composed of three parts: X823 V1.5 storage shield, X-C2 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 fan), and they will be packed into a ALU-case to get a complete NASPi Lite;\u003c\/li\u003e\n\u003cli\u003eSSD\/HDD Thickness Supported NASPi Lite supports SSD with a thickness not exceeding 9.8mm, most 2.5\" HDD\/SSD on the market are only 7mm thickness.\u003c\/li\u003e\n\u003cli\u003eWifi Description5G WiFi is stable enough, recommend using Ethernet or 5G WiFi.\u003c\/li\u003e\n\u003cli\u003eX-C2 Adapter Boardwith one full size hdmi-port, not support software shutdown function, use normal 5V 2pin cooling fan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":7905984217325,"title":"Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+\/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+\/Raspberry Pi 3 Model B-Black (P252)","handle":"geekworm-raspberry-pi-3-b-case-raspberry-pi-3b-3b-aluminum-alloy-heavy-duty-passive-cooling-metal-case-with-heatsink-pillar-for-raspberry-pi-3-model-b-raspberry-pi-3-model-b-black-p252","description":"\u003ch1\u003eGeekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+\/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+\/Raspberry Pi 3 Model B-Black (P252)\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003e[Note] Raspberry Pi 3 Model B plus\/ 3B \/ Pi 2B motherboard\nis not included in the packing list. [Overview] This is an aluminum alloy\npassive cooling case designed for Raspberry Pi 3 Model B+ Plus and Raspberry\nPi 3 Model B+. This aluminum case have a great heat dissipation with perfect\ndesign. It is a Raspberry Pi 3b case and Raspberry Pi 3b+ case. [Features]\nIncreasing the large Cooling column allows for better heat dissipation.Design\nwith good heat dissipation, do not have to install the cooling fan or\nheatsink.This case is constructed out of high quality aluminum\nmaterial.Suitable for Raspberry Pi 3 Model B+ \/3B \/ 2B motherboard Easy\ninstallation and all hardware is includedAccess to all ports of Raspberry Pi 3\nModel B+ \/3B \/ 2BGPIO cable interface is reservered, support to install the\ngpio cable.Easy to install and insert the micro sd card [Packing List] 1 x\nAluminum Case for Raspberry Pi 34 x Thermal tapes1 x Mounting Screws Pack P252\nCase Dimensions How to Use the Thermal Tape for Raspberry Pi 3B+ and Raspberry\nPi 3B with 4pcs thermal tapes to attach on your Raspberry Pi 3B+\/3B. For\nRaspberry Pi 3B+, attach the big thin thermal tape on CPU; For Raspberry Pi\n3B, attach the big thick thermal tape on CPU.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeekworm Raspberry Pi 3B+\/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B.\u003c\/li\u003e\n\u003cli\u003eDesign with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink\u003c\/li\u003e\n\u003cli\u003eAccess to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card.\u003c\/li\u003e\n\u003cli\u003eMade of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+\/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU; For Raspberry Pi 3B, attach the big thickness thermal tape on CPU.\u003c\/li\u003e\n\u003cli\u003eNote: The Raspberry Pi 3 board is not included in the packing list. Packing List: 1 x Aluminum Case for Pi3; 4 x Thermal Pads; 1 x Mounting Screws Pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","published_at":"2022-08-23T19:08:15+10:00","created_at":"2022-08-23T19:08:22+10:00","vendor":"Geekworm","type":"Single Board Computers","tags":["electronics"],"price":12100,"price_min":12100,"price_max":12100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43242987716845,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B091DP32DW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+\/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+\/Raspberry Pi 3 Model B-Black (P252)","public_title":null,"options":["Default Title"],"price":12100,"weight":222,"compare_at_price":null,"inventory_management":null,"barcode":"TB-2021-19","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/71JARsaN2eL.jpg?v=1661245702","\/\/leoforward.com\/cdn\/shop\/products\/718Um-zfSyL.jpg?v=1661245702","\/\/leoforward.com\/cdn\/shop\/products\/71MOmyxYNfL.jpg?v=1661245702","\/\/leoforward.com\/cdn\/shop\/products\/71ix0ANfXhL.jpg?v=1661245702","\/\/leoforward.com\/cdn\/shop\/products\/61JV1Sjq5lL.jpg?v=1661245702","\/\/leoforward.com\/cdn\/shop\/products\/71HQNCGhh1L.jpg?v=1661245702"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/71JARsaN2eL.jpg?v=1661245702","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+\/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+\/Raspberry Pi 3 Model B-Black (P252)","id":30304323010797,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71JARsaN2eL.jpg?v=1661245702"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71JARsaN2eL.jpg?v=1661245702","width":2000},{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+\/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+\/Raspberry Pi 3 Model B-Black (P252)","id":30304323043565,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/718Um-zfSyL.jpg?v=1661245702"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/718Um-zfSyL.jpg?v=1661245702","width":2000},{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+\/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+\/Raspberry Pi 3 Model B-Black (P252)","id":30304323076333,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71MOmyxYNfL.jpg?v=1661245702"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71MOmyxYNfL.jpg?v=1661245702","width":2000},{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+\/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+\/Raspberry Pi 3 Model B-Black (P252)","id":30304323109101,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71ix0ANfXhL.jpg?v=1661245702"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71ix0ANfXhL.jpg?v=1661245702","width":2000},{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+\/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+\/Raspberry Pi 3 Model B-Black (P252)","id":30304323141869,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61JV1Sjq5lL.jpg?v=1661245702"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61JV1Sjq5lL.jpg?v=1661245702","width":2000},{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+\/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+\/Raspberry Pi 3 Model B-Black (P252)","id":30304323174637,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71HQNCGhh1L.jpg?v=1661245702"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71HQNCGhh1L.jpg?v=1661245702","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGeekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+\/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+\/Raspberry Pi 3 Model B-Black (P252)\u003c\/h1\u003e\n\u003cdiv style=\"max-width:512px;\"\u003e\u003c\/div\u003e\n\u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n\u003cp\u003e[Note] Raspberry Pi 3 Model B plus\/ 3B \/ Pi 2B motherboard\nis not included in the packing list. [Overview] This is an aluminum alloy\npassive cooling case designed for Raspberry Pi 3 Model B+ Plus and Raspberry\nPi 3 Model B+. This aluminum case have a great heat dissipation with perfect\ndesign. It is a Raspberry Pi 3b case and Raspberry Pi 3b+ case. [Features]\nIncreasing the large Cooling column allows for better heat dissipation.Design\nwith good heat dissipation, do not have to install the cooling fan or\nheatsink.This case is constructed out of high quality aluminum\nmaterial.Suitable for Raspberry Pi 3 Model B+ \/3B \/ 2B motherboard Easy\ninstallation and all hardware is includedAccess to all ports of Raspberry Pi 3\nModel B+ \/3B \/ 2BGPIO cable interface is reservered, support to install the\ngpio cable.Easy to install and insert the micro sd card [Packing List] 1 x\nAluminum Case for Raspberry Pi 34 x Thermal tapes1 x Mounting Screws Pack P252\nCase Dimensions How to Use the Thermal Tape for Raspberry Pi 3B+ and Raspberry\nPi 3B with 4pcs thermal tapes to attach on your Raspberry Pi 3B+\/3B. For\nRaspberry Pi 3B+, attach the big thin thermal tape on CPU; For Raspberry Pi\n3B, attach the big thick thermal tape on CPU.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeekworm Raspberry Pi 3B+\/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B.\u003c\/li\u003e\n\u003cli\u003eDesign with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink\u003c\/li\u003e\n\u003cli\u003eAccess to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card.\u003c\/li\u003e\n\u003cli\u003eMade of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+\/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU; For Raspberry Pi 3B, attach the big thickness thermal tape on CPU.\u003c\/li\u003e\n\u003cli\u003eNote: The Raspberry Pi 3 board is not included in the packing list. Packing List: 1 x Aluminum Case for Pi3; 4 x Thermal Pads; 1 x Mounting Screws Pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n"}

{"id":8458492805357,"title":"Geekworm Raspberry Pi 4 11 mm Heatsink Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B \u0026 Pi 4 Expansion Board Support POE Extension P165-B","handle":"geekworm-raspberry-pi-4-11-mm-heatsink-heatsink-p165-b-raspberry-pi-4b-radiator-for-raspberry-pi-4-model-b-pi-4-expansion-board-support-poe-extension-p165-b","description":"\u003ch3\u003eGeekworm Raspberry Pi 4 11 mm heatsink Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B \u0026amp; Pi 4 Expansion Board Support POE Extension\u003c\/h3\u003e \u003cp id=\"b\"\u003e\u003c\/p\u003e \u003ch3\u003eProduct Features\u003c\/h3\u003e \u003cul class=\"a\"\u003e \u003cli\u003eGeekworm P165 11mm raspberry pi 4 embedded aluminum heatsink for raspberry pi 4 model b(1GB\/ 2GB\/ 4GB\/ 8GB). WiKi for reference: raspberrypiwiki.com\/P165\u003c\/li\u003e \u003cli\u003eSupports to cool down the raspberry pi 4 even when using with the pi 4 expansion board (also support PoE board);\u003c\/li\u003e \u003cli\u003eOnly equipped with 4 pieces M2.5 x 5 + 6 mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards.\u003c\/li\u003e \u003cli\u003eAdd one piece of thermal tape as a gift in case you will need. Very few radiators may have processing errors, and the height needs to be supplemented by thermal pads. But it is strongly recommended to use the CPU grease (not included) to get better heat dissipation.\u003c\/li\u003e \u003cli\u003eThe thickness of this radiator is 11mm. The heat dissipation may be insufficient if overclocking for a long time, pls add a 30mm fan(3010 or 3007) above heatsink then;\u003c\/li\u003e \u003c\/ul\u003e","published_at":"2024-03-12T19:08:13+11:00","created_at":"2024-03-12T19:08:22+11:00","vendor":"Geekworm","type":"Heat sink","tags":["industryDE"],"price":15200,"price_min":15200,"price_max":15200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45409771258093,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"de-B08N617L1J","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Geekworm Raspberry Pi 4 11 mm Heatsink Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B \u0026 Pi 4 Expansion Board Support POE Extension P165-B","public_title":null,"options":["Default Title"],"price":15200,"weight":700,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/61L7cR--gjL.jpg?v=1710230903","\/\/leoforward.com\/cdn\/shop\/products\/71f-zgTCo6L_9d072f55-1a54-4a15-b0f5-4bbec71e2f6e.jpg?v=1710230903","\/\/leoforward.com\/cdn\/shop\/products\/71xtu_HsprL.jpg?v=1710230903","\/\/leoforward.com\/cdn\/shop\/products\/71RCGrQadaL_05f74ad1-180b-4b82-90a6-89cbcc3faab8.jpg?v=1710230903","\/\/leoforward.com\/cdn\/shop\/products\/71J7NKxeuWL.jpg?v=1710230903","\/\/leoforward.com\/cdn\/shop\/products\/91BFgyhGCgL.jpg?v=1710230903"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/61L7cR--gjL.jpg?v=1710230903","options":["Title"],"media":[{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 4 11 mm Heatsink Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B \u0026 Pi 4 Expansion Board Support POE Extension P165-B","id":32619282235629,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61L7cR--gjL.jpg?v=1710230903"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61L7cR--gjL.jpg?v=1710230903","width":1600},{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 4 11 mm Heatsink Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B \u0026 Pi 4 Expansion Board Support POE Extension P165-B","id":32619282301165,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71f-zgTCo6L_9d072f55-1a54-4a15-b0f5-4bbec71e2f6e.jpg?v=1710230903"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71f-zgTCo6L_9d072f55-1a54-4a15-b0f5-4bbec71e2f6e.jpg?v=1710230903","width":1600},{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 4 11 mm Heatsink Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B \u0026 Pi 4 Expansion Board Support POE Extension P165-B","id":32619282333933,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71xtu_HsprL.jpg?v=1710230903"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71xtu_HsprL.jpg?v=1710230903","width":2000},{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 4 11 mm Heatsink Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B \u0026 Pi 4 Expansion Board Support POE Extension P165-B","id":32619282366701,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71RCGrQadaL_05f74ad1-180b-4b82-90a6-89cbcc3faab8.jpg?v=1710230903"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71RCGrQadaL_05f74ad1-180b-4b82-90a6-89cbcc3faab8.jpg?v=1710230903","width":1600},{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 4 11 mm Heatsink Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B \u0026 Pi 4 Expansion Board Support POE Extension P165-B","id":32619282399469,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71J7NKxeuWL.jpg?v=1710230903"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71J7NKxeuWL.jpg?v=1710230903","width":1600},{"alt":" [AUSTRALIA] - Geekworm Raspberry Pi 4 11 mm Heatsink Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B \u0026 Pi 4 Expansion Board Support POE Extension P165-B","id":32619282432237,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/leoforward.com\/cdn\/shop\/products\/91BFgyhGCgL.jpg?v=1710230903"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/91BFgyhGCgL.jpg?v=1710230903","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eGeekworm Raspberry Pi 4 11 mm heatsink Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B \u0026amp; Pi 4 Expansion Board Support POE Extension\u003c\/h3\u003e \u003cp id=\"b\"\u003e\u003c\/p\u003e \u003ch3\u003eProduct Features\u003c\/h3\u003e \u003cul class=\"a\"\u003e \u003cli\u003eGeekworm P165 11mm raspberry pi 4 embedded aluminum heatsink for raspberry pi 4 model b(1GB\/ 2GB\/ 4GB\/ 8GB). WiKi for reference: raspberrypiwiki.com\/P165\u003c\/li\u003e \u003cli\u003eSupports to cool down the raspberry pi 4 even when using with the pi 4 expansion board (also support PoE board);\u003c\/li\u003e \u003cli\u003eOnly equipped with 4 pieces M2.5 x 5 + 6 mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards.\u003c\/li\u003e \u003cli\u003eAdd one piece of thermal tape as a gift in case you will need. Very few radiators may have processing errors, and the height needs to be supplemented by thermal pads. But it is strongly recommended to use the CPU grease (not included) to get better heat dissipation.\u003c\/li\u003e \u003cli\u003eThe thickness of this radiator is 11mm. The heat dissipation may be insufficient if overclocking for a long time, pls add a 30mm fan(3010 or 3007) above heatsink then;\u003c\/li\u003e \u003c\/ul\u003e"}