{"product_id":"original-bamboo-p2s-external-exhaust-fan-replacement-hepa-activated-carbon-p2s-filter-p2s-external-exhaust-fan-kit-smart-auto-mode-reduces-ufps-vocs-odors-upgrade-p2s-air-filter-system","title":"Original Bamboo P2S External Exhaust Fan + Replacement HEPA+Activated Carbon P2S Filter –P2S External Exhaust Fan kit Smart Auto Mode, Reduces UFPs, VOCs \u0026 Odors Upgrade P2S Air Filter System","description":"\u003ch3\u003eOriginal Bamboo P2S External Exhaust Fan + Replacement HEPA+Activated Carbon P2S Filter –P2S External Exhaust Fan kit Smart Auto Mode, Reduces UFPs, VOCs \u0026amp; Odors Upgrade P2S Air Filter System\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eP2S External Exhaust Fan + HEPA 13 \/ Activated Carbon Air Filter Combo\nTransform your p2s bambu lab into a truly healthy printing workstation. The\noriginal external exhaust fan kit adds active exhaust to your printer, while\nour HEPA 13 + activated carbon air filter captures ultrafine particles and\nVOCs before they leave the machine. This is the complete 3d printer\nventilation kit that Bambu Lab P2S owners have been waiting for. Why you need\nactive exhaust + filtration. Your P2S comes with a built‑in recirculating\nfilter – it only uses activated carbon and simply moves air around inside the\nchamber. Ultrafine particles (UFPs) are never trapped, and odors\/VOCs stay in\nyour room. Our p2s external exhaust fan actively pulls contaminated air out,\nand the included p2s exhaust fan filter (HEPA 13 + honeycomb activated carbon)\ncleans that air before it exits your printer or goes outdoors. Capture 99.97%\nof PM2.5 and nano particles while adsorbing formaldehyde, fumes, and harsh\nsmells from ABS, ASA, nylon. Smart, automatic performance. The p2s exhaust fan\nintegrates seamlessly with your printer’s firmware. When printing\nPLA\/PETG\/TPU\/PVA, the fan automatically runs (variable speed) for cooling and\nfume extraction. For ABS\/ASA\/PA\/PC, the fan defaults OFF to prevent warping,\nthen activates a full post‑print purge – and our filter ensures toxic residues\nare filtered, not just blown outside. All controlled via Bambu Studio or the\nprinter’s touchscreen. Installation – straightforward, with options. Two\ninstallation plans are provided (refer to Bambu Lab Wiki). You can reuse your\noriginal rear panel – the exhaust port is cleverly positioned on the right\nside of the purge chute. Or you can replace it with a dedicated rear panel\n(not included) for optimised airflow. In both cases, you will need to 3D print\nthe fan housing (STL downloadable from Bambu Lab Wiki) using PETG, ABS or PC.\nThe kit includes the fan, circuit board, 6‑pin cable, screws, and our premium\nair filter. Note: If you own the P2S without AMS, you must purchase an\nadditional buffer accessory to use this exhaust fan kit. What’s in the box. 1x\nExternal exhaust fan (with pre‑wired connector) 1x Circuit board 1x 6‑pin\ncable Mounting screws 1x HEPA 13 + activated carbon air filter (replacement\ngrade) Health‑focused, quiet, and reliable. Ideal for home, bedroom, studio,\nclassroom, or office – especially when printing engineering materials. Reduce\nairborne contaminants, protect your lungs, and keep your indoor air clean. A\nmust‑have bambulab p2s accessory for anyone serious about 3D printing safety.\nCompatibility: Fully compatible with bambu lab p2s combo, p2s bambu lab, and\nall P2S models. Works with AMS systems (no extra buffer needed for AMS units).\nFirmware requirement: 01.01.01.00 or later. Bambu Studio: V2.4.1.80 or later.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003eUpgraded Chamber Filter  HEPA + Carbon vs. StockStock chamber filter uses activated carbon on both sides  no HEPA, cannot capture ultrafine particles. Our external exhaust filter features HEPA 13 on one side + activated carbon on the other. Captures 99.97% of PM2.5\/UFPs while absorbing VOCs\/odors. Essential p2s air filter for bambu lab p2s external exhaust fan upgrade\u003c\/li\u003e\n         \u003cli\u003eComplete TwoFilter System  Both P2S Slots Covered Your p2s bambu lab has exactly two filter locations: the internal chamber filter (pre-installed.) and the external exhaust fan filter Requires self-installation.. This combo includes  a exhaust fan air filter plus an exhaust fan kit. Install together to build a complete filtration system, not just half a solution\u003c\/li\u003e\n         \u003cli\u003eDual Protection  Every Print Mode CoveredFor PLA\/PETG\/TPU\/PVA, the p2s external exhaust fan autoruns; our exhaust filter cleans before outdoor release. For ABS\/ASA\/PA\/PC, postprint purge is fully filtered. The chamber filter continuously cleans recirculated air inside. Two filters working together = real double protection for your bambu lab p2s combo\u003c\/li\u003e\n         \u003cli\u003eLeakage Sealed  No More Hidden EscapeEven with door closed, the nozzle wiper area leaks chamber air toward the fan. Our p2s hepa filter on the exhaust side captures that leaked air, while the upgraded chamber filter catches particles inside. Two layers of defense  nothing escapes. A musthave bambu lab p2s accessory for healthsafe printing\u003c\/li\u003e\n         \u003cli\u003eWhats Inside  Complete Filtration Combo, Best Value Includes 1x original external exhaust fan kit + 1x external exhaust fan filter (HEPA 13 + activated carbon)\u003c\/li\u003e\n  \u003c\/ul\u003e","brand":"Wefuit","offers":[{"title":"Default Title","offer_id":50261744648429,"sku":"B0GVMNM57M","price":216.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0324\/1050\/1164\/files\/B0GVMNM57M.jpg?v=1783599094","url":"https:\/\/leoforward.com\/products\/original-bamboo-p2s-external-exhaust-fan-replacement-hepa-activated-carbon-p2s-filter-p2s-external-exhaust-fan-kit-smart-auto-mode-reduces-ufps-vocs-odors-upgrade-p2s-air-filter-system","provider":"LeoForward AU","version":"1.0","type":"link"}