{"product_id":"m-2-nvme-ssd-extension-bracket-2230-to-2280-5-5","title":"M.2 NVME SSD Extension Bracket 2230 to 2280，5 5","description":"\u003ch3\u003eM.2 NVME SSD Extension Bracket 2230 to 2280，5\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDetailed ParametersBrand: AoQhirType: Adapter CardColor: Extended\nBoardCompatibility: Compatible with M.2 2230 to 2242 \/ 2260 \/ 2280SSD Type:\nCompatible with M.2 NVMEDesign: Breakable segment design with positioning\nholesDimensions: Approx. 9 × 110 × 5 mmWeight: Approx. 5 gPackage Contents:\nBracket ×1, Screws ×2, Washers ×2, Screwdriver ×1Usage StepsStep 1 — Determine\nSSD Size: Compare your M.2 NVME SSD length against the extension bracket to\nidentify which segment needs to be removed. The bracket is marked with segment\ndivisions for 2230, 2242, 2260, and 2280 sizes.Step 2 — Locate the Split\nPosition: The bracket body features scored positioning holes and easy-break\ndotted lines at each segment division point. Align your SSD with the bracket\nto find the correct split position.Step 3 — Snap Off Excess by Hand: Hold the\nbracket firmly and bend along the dotted line at the identified segment point\nby hand to break off the excess bracket section. No cutting tools are needed —\nthe scored lines allow clean manual separation.Step 4 — Mount the SSD: Place\nthe M.2 2230 NVME SSD onto the trimmed bracket, aligning the SSD notch with\nthe bracket connector.Step 5 — Install into M.2 Slot: Insert the assembled\nbracket with SSD into the target M.2 slot on the motherboard. Secure the\nassembly using the included screws and washers.Step 6 — Verify Installation:\nPower on the device and confirm the SSD is recognized in the system.Important\nNotesMeasure Before Breaking: Carefully confirm the correct segment position\nbefore snapping. Once a segment is broken off, it cannot be reattached.\nDouble-check your SSD size against the bracket markings.Snap Along the Dotted\nLine: Always bend along the scored positioning holes and easy-break dotted\nlines. Do not cut or saw the bracket — manual bending at the designated points\nensures a clean break.Static Precaution: Before handling the bracket or SSD,\nground yourself by touching a metal surface or wearing an anti-static wrist\nstrap to prevent electrostatic damage.NVME Only: This bracket is designed for\nM.2 NVME (M-key) SSDs. Do not use with M.2 SATA (B-key or B+M key) drives, as\nthe pin configuration differs.Do Not Force Installation: If the SSD or bracket\ndoes not slide in smoothly, do not apply excessive force. Recheck alignment\nand orientation to avoid damaging the connector.Usage ScenariosDesktop PC\nStorage Upgrade: When you have a spare M.2 2230 NVME SSD from an old laptop\nand want to install it into a desktop motherboard with a 2280 M.2 slot, this\nbracket bridges the size gap effortlessly.Laptop SSD Repurposing: Ideal for\nusers who removed a short M.2 NVME SSD from a compact laptop and wish to reuse\nit in another device with a standard-length M.2 slot.DIY Storage Expansion\nProjects: Perfect for system builders and DIY enthusiasts assembling custom\nPCs who need flexible M.2 SSD mounting options across different form factor\nsizes.IT and Repair Work: Convenient for PC repair technicians who need to\ntest or repurpose M.2 2230 NVME SSDs across various devices with different M.2\nslot lengths in a professional service environment.Cost-Effective Hardware\nReuse: Repurpose your existing shorter M.2 NVME SSDs instead of purchasing new\nlonger-format drives, saving on upgrade costs while maximizing hardware\nutilization.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003eM.2 NVME SSD Extension Bracket The AoQhir extension bracket enables users to extend shorter M.2 2230 SSDs to longer M.2 sizes, allowing smaller NVME drives to be securely mounted into standard M.2 slots on desktop motherboards and laptops.\u003c\/li\u003e\n         \u003cli\u003eMulti-Size Conversion Support Compatible with converting M.2 2230 form factor to 2242, 2260, or 2280 lengths. Compatible with a wide range of M.2 NVME solid state drives, providing flexible mounting solutions for different motherboard layouts and device configurations.\u003c\/li\u003e\n         \u003cli\u003eAdapter Card Design Product type: Designed specifically for M.2 NVME SSD extension applications, ensuring secure and stable drive mounting with straightforward installation.\u003c\/li\u003e\n         \u003cli\u003eUltra-Compact and Lightweight Dimensions: approximately 9  110  5 mm. Weight: approximately 5 g. Ultra-thin profile does not interfere with adjacent motherboard components, making it easy to install even in space-constrained chassis environments.\u003c\/li\u003e\n         \u003cli\u003eSecure and Stable SSD Mounting Precision-engineered mounting structure firmly holds the SSD in place, preventing drive loosening or disconnection caused by vibration, impact, or system movement during operation, ensuring consistent data transfer reliability.\u003c\/li\u003e\n  \u003c\/ul\u003e","brand":"AoQhir","offers":[{"title":"5","offer_id":68249668976877,"sku":"B0HJZ9PKQG","price":98.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0324\/1050\/1164\/files\/B0HJZ9PKQG.jpg?v=1794296369","url":"https:\/\/leoforward.com\/products\/m-2-nvme-ssd-extension-bracket-2230-to-2280-5-5","provider":"LeoForward AU","version":"1.0","type":"link"}