{"id":5243551285403,"title":"ARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts 36MM","handle":"ares-25007-1-2-inch-drive-6-point-axle-nut-socket-36mm-extra-deep-impact-socket-for-easy-removal-of-axle-shaft-nuts-36mm","description":"\u003ch3\u003eARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eA Must-Have For Work On Your Vehicle's Front End The ARES\n36mm Axle Nut Socket will help you remove axle nut shafts more easily with\nextra depth to accommodate various axle lengths. Made from high-strength, heat\ntreated Chrome Vanadium with Manganese Phosphate coating to resist corrosion,\nthis socket is engineered for use with impact drivers. Its high-torque,\n6-point opening grips flat sides of fasteners, not corners, preventing round-\noff, so whatever late model GM vehicle you're working on, you'll be able to\nreplace wheel hubs, ball joints, and u-joints safely and efficiently.\nFeatures: Includes: 1 pc. 36mm axle nut socket1\/2-inch driveExtra deep to fit\nvarious axle lengthsMade from high-strength, heat treated Chrome\nVanadiumManganese Phosphate coating resists corrosionHigh-torque, 6-point\nopening grips flat sides of fasteners, not corners, preventing round-offFor\nremoval or installation of axle nuts on front wheel drive vehiclesFits many\nlate model GM vehiclesSafe for use with Impact driversThis tool meets and\nexceeds ANSI\/ASME standards. Available in These Sizes:\n29mm30mm31mm32mm33mm34mm35mm36mm38mm39mm Read more A Must Have for Front End\nWork This 36mm axle nut socket is extra deep to fit various axle lengths and\ncan be used to remove or install axle nuts on front wheel drive vehicles.\nGreat for wheel hub replacement, upper\/lower ball joint replacement, u-joint\nreplacement, and more, this socket fits many late model GM vehicles. Read more\nQuality You Need Made from high-strength, heat treated Chrome Vanadium steel,\nthis axle nut socket is high-torque, and the Manganese Phosphate coating\nresists corrosion. This impact-ready axle nut socket features a 6-point\nopening that grips the flat sides of fasteners, not corners, to prevent round-\noff. This tool meets and exceeds ANSI\/ASME standards, so you know you'll be\nable to count on it. Read more 1\/2-inch Drive 5-Piece Flip Lug Nut Socket Set\n5-Piece 1\/2-Inch Drive Non-Marring Lug Nut Socket Set Front End Service Set\n1\/2-Inch Drive 30MM 12 Point Axle Nut Socket 15\/16-inch Pickle Fork Ball Joint\nSeparator Pitman Arm and Tie Rod Adjusting Tool Set Includes Set includes a\n3-inch 1\/2-inch drive extension bar and four flip sockets in the following\nsizes: 17mm \/ 19mm, 21mm \/ 22mm, 3\/4-inch \/ 13\/16-inch, and 7\/8-inch \/\n15\/16-inch Set includes a reusable lightweight aluminum storage rail and five\nnon-marring 1\/2-inch drive lug nut sockets in the following sizes: 17mm, 19mm\n(3\/4-inch), 21mm, 13\/16-inch, and 7\/8-inch. Set includes: a 1 5\/16-inch (33mm)\nPitman Arm Puller, a 1 1\/16-inch (27mm) Pitman Arm Puller, a 22mm Ball Joint\nSeparator, a 19mm Universal Tie Rod End Tool, and an Outer Tie Rod Remover\ntool. Includes: 1 pc. 30mm 12-point axle nut socket Includes Pickle Fork Ball\nJoint Separator Set includes one 1\/2-inch drive 1 7\/16-inch Pitman Arm\nAdjusting tool and four 1\/2-inch drive Tie Rod Adjusting Tools in the\nfollowing sizes: 3\/4-inch, 7\/8-inch, 1 1\/8-inch, and 1 13\/16-inch. Features\nThese lug nut sockets can be used with an impact wrench, air ratchet, breaker\nbar, or torque wrench. The set includes some of the most popular lug nut sizes\nand is a must have inside your car for tire changes, brake jobs, and more.\nThese impact sockets can be used with any 1\/2-inch drive hand wrenches,\nelectric, or pneumatic tools, and thanks to a total length of 3 3\/8 inches\n(8.6cm) and a hollow design, these sockets are great for removing longer\nbolts, as well. The press type ball joint separator allows for ball joint\nremoval without damage to boots and other parts that typical fork type\nremovers may cause damage to. The set also comes with a high quality storage\ncase. Engineered for use with impact drivers, this axle nut socket is extra\ndeep to fit various axle lengths, and its 12-point design prevents round-off\nwhile providing a thinner wall. This tool makes it easy to separate ball\njoints or even remove CV drive shafts on FWD vehicles. Just keep a grip on the\nknurled shaft and add extra force with a hammer as needed. The unique design\nallows for 360-degree rotation of the adjusting sleeve, even when space is\nlimited. This set comes in a convenient, blow-molded storage case, so you'll\nnever have to search for Pitman Arm or Tie Rod Adjusting Tool you need.\nQuality Made of high strength Chrome Molybdenum Steel, the Electro-Phosphate\nfinish combined with laser etched size markings provides a sleek look and high\nvisibility Made of high strength Chrome Molybdenum steel with a corrosion-\nresistant Manganese Phosphate coating, these 6-point, thin-walled, impact-\nready sockets feature a non-marring protective sleeve and insert to prevent\nscratches during use. The tools are constructed from high quality heat treated\ndrop forged steel to ensure longevity and durability over the lifetime of the\ntools. Made with the highest quality construction available, this set is great\nfor both amateurs and professionals. Made from high-strength, heat treated\nChrome Vanadium steel, this axle nut socket is high-torque, and the Manganese\nPhosphate coating resists corrosion. This tool meets and exceeds ANSI\/ASME\nstandards. Our 15\/16-inch ball joint separator is constructed from tempered\ndrop forged steel for enhanced durability and features a knurled handle to\nensure a steady grip during use. Constructed of Chrome-Moly steel with a\ncorrosion-resistant Manganese Phosphate Coating, these Pitman Arm and Tie Rod\nAdjusting tools will work with your favorite 1\/2-inch drive ratchet or flex\nbar for easy and convenient use.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eDESIGN CONSIDERATIONS: Engineered for use with impact drivers, this axle nut socket is extra deep to fit various axle lengths, and its 6-point opening grips the flat sides of fasteners, not corners, to prevent round-off.\u003c\/li\u003e\n \u003cli\u003eQUALITY: Made from high-strength, heat treated Chrome Vanadium steel, this axle nut socket is high-torque, and the Manganese Phosphate coating resists corrosion. This tool meets and exceeds ANSI\/ASME standards.\u003c\/li\u003e\n \u003cli\u003eCOMMON APPLICATIONS: This axle nut socket can be used for the removal or installation of axle nuts on front wheel drive vehicles and fits many late model GM vehicles. It's a must-have socket if you're doing any work on the front end that involves removing your wheel hub including wheel hub replacement, Upper\/Lower ball joint replacement, U-joint replacement, and more!\u003c\/li\u003e\n \u003cli\u003eRELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 6 Point Axle Nut Socket, simply contact customer service for troubleshooting help, parts, replacement, or refund.\u003c\/li\u003e\n \u003cli\u003eASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, were proud to help this great organization.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n","published_at":"2020-05-25T00:44:59+10:00","created_at":"2020-05-25T00:44:59+10:00","vendor":"Visit the ARES Store","type":"Individual Drive Sockets","tags":["leo29"],"price":15300,"price_min":15300,"price_max":15300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34427734524059,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01CIWSVTE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts 36MM","public_title":null,"options":["Default Title"],"price":15300,"weight":680,"compare_at_price":null,"inventory_management":null,"barcode":"635983559803","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/leoforward.com\/cdn\/shop\/products\/B01CIWSVTE.jpg?v=1650946853","\/\/leoforward.com\/cdn\/shop\/products\/81NHwRImHvL.jpg?v=1622763996","\/\/leoforward.com\/cdn\/shop\/products\/81NKZYRvrLL.jpg?v=1622763996","\/\/leoforward.com\/cdn\/shop\/products\/81p7sLU1GDL.jpg?v=1622763996","\/\/leoforward.com\/cdn\/shop\/products\/71up-QObxOL.jpg?v=1622763996","\/\/leoforward.com\/cdn\/shop\/products\/61wcsXfa3-L_04e0afd7-0674-44ae-9f6b-a385cf6f9385.jpg?v=1622763996","\/\/leoforward.com\/cdn\/shop\/products\/51XbNpx17-L_580ce85a-bf3d-4840-9b5a-38d34cf04b03.jpg?v=1622763996"],"featured_image":"\/\/leoforward.com\/cdn\/shop\/products\/B01CIWSVTE.jpg?v=1650946853","options":["Title"],"media":[{"alt":" [AUSTRALIA] - ARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts 36MM","id":29636804870381,"position":1,"preview_image":{"aspect_ratio":0.939,"height":2560,"width":2404,"src":"\/\/leoforward.com\/cdn\/shop\/products\/B01CIWSVTE.jpg?v=1650946853"},"aspect_ratio":0.939,"height":2560,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/B01CIWSVTE.jpg?v=1650946853","width":2404},{"alt":" [AUSTRALIA] - ARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts 36MM","id":9110870786203,"position":2,"preview_image":{"aspect_ratio":1.125,"height":2276,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81NHwRImHvL.jpg?v=1622763996"},"aspect_ratio":1.125,"height":2276,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81NHwRImHvL.jpg?v=1622763996","width":2560},{"alt":" [AUSTRALIA] - ARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts 36MM","id":9110870818971,"position":3,"preview_image":{"aspect_ratio":1.125,"height":2276,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81NKZYRvrLL.jpg?v=1622763996"},"aspect_ratio":1.125,"height":2276,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81NKZYRvrLL.jpg?v=1622763996","width":2560},{"alt":" [AUSTRALIA] - ARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts 36MM","id":9110870851739,"position":4,"preview_image":{"aspect_ratio":0.704,"height":2560,"width":1801,"src":"\/\/leoforward.com\/cdn\/shop\/products\/81p7sLU1GDL.jpg?v=1622763996"},"aspect_ratio":0.704,"height":2560,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/81p7sLU1GDL.jpg?v=1622763996","width":1801},{"alt":" [AUSTRALIA] - ARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts 36MM","id":9110870884507,"position":5,"preview_image":{"aspect_ratio":1.703,"height":1503,"width":2560,"src":"\/\/leoforward.com\/cdn\/shop\/products\/71up-QObxOL.jpg?v=1622763996"},"aspect_ratio":1.703,"height":1503,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/71up-QObxOL.jpg?v=1622763996","width":2560},{"alt":" [AUSTRALIA] - ARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts 36MM","id":9110870917275,"position":6,"preview_image":{"aspect_ratio":1.797,"height":602,"width":1082,"src":"\/\/leoforward.com\/cdn\/shop\/products\/61wcsXfa3-L_04e0afd7-0674-44ae-9f6b-a385cf6f9385.jpg?v=1622763996"},"aspect_ratio":1.797,"height":602,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/61wcsXfa3-L_04e0afd7-0674-44ae-9f6b-a385cf6f9385.jpg?v=1622763996","width":1082},{"alt":" [AUSTRALIA] - ARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts 36MM","id":9110870950043,"position":7,"preview_image":{"aspect_ratio":1.0,"height":432,"width":432,"src":"\/\/leoforward.com\/cdn\/shop\/products\/51XbNpx17-L_580ce85a-bf3d-4840-9b5a-38d34cf04b03.jpg?v=1622763996"},"aspect_ratio":1.0,"height":432,"media_type":"image","src":"\/\/leoforward.com\/cdn\/shop\/products\/51XbNpx17-L_580ce85a-bf3d-4840-9b5a-38d34cf04b03.jpg?v=1622763996","width":432}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eARES 25007-1\/2-Inch Drive 6 Point Axle Nut Socket (36MM) - Extra Deep Impact Socket for Easy Removal of Axle Shaft Nuts\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eA Must-Have For Work On Your Vehicle's Front End The ARES\n36mm Axle Nut Socket will help you remove axle nut shafts more easily with\nextra depth to accommodate various axle lengths. Made from high-strength, heat\ntreated Chrome Vanadium with Manganese Phosphate coating to resist corrosion,\nthis socket is engineered for use with impact drivers. Its high-torque,\n6-point opening grips flat sides of fasteners, not corners, preventing round-\noff, so whatever late model GM vehicle you're working on, you'll be able to\nreplace wheel hubs, ball joints, and u-joints safely and efficiently.\nFeatures: Includes: 1 pc. 36mm axle nut socket1\/2-inch driveExtra deep to fit\nvarious axle lengthsMade from high-strength, heat treated Chrome\nVanadiumManganese Phosphate coating resists corrosionHigh-torque, 6-point\nopening grips flat sides of fasteners, not corners, preventing round-offFor\nremoval or installation of axle nuts on front wheel drive vehiclesFits many\nlate model GM vehiclesSafe for use with Impact driversThis tool meets and\nexceeds ANSI\/ASME standards. Available in These Sizes:\n29mm30mm31mm32mm33mm34mm35mm36mm38mm39mm Read more A Must Have for Front End\nWork This 36mm axle nut socket is extra deep to fit various axle lengths and\ncan be used to remove or install axle nuts on front wheel drive vehicles.\nGreat for wheel hub replacement, upper\/lower ball joint replacement, u-joint\nreplacement, and more, this socket fits many late model GM vehicles. Read more\nQuality You Need Made from high-strength, heat treated Chrome Vanadium steel,\nthis axle nut socket is high-torque, and the Manganese Phosphate coating\nresists corrosion. This impact-ready axle nut socket features a 6-point\nopening that grips the flat sides of fasteners, not corners, to prevent round-\noff. This tool meets and exceeds ANSI\/ASME standards, so you know you'll be\nable to count on it. Read more 1\/2-inch Drive 5-Piece Flip Lug Nut Socket Set\n5-Piece 1\/2-Inch Drive Non-Marring Lug Nut Socket Set Front End Service Set\n1\/2-Inch Drive 30MM 12 Point Axle Nut Socket 15\/16-inch Pickle Fork Ball Joint\nSeparator Pitman Arm and Tie Rod Adjusting Tool Set Includes Set includes a\n3-inch 1\/2-inch drive extension bar and four flip sockets in the following\nsizes: 17mm \/ 19mm, 21mm \/ 22mm, 3\/4-inch \/ 13\/16-inch, and 7\/8-inch \/\n15\/16-inch Set includes a reusable lightweight aluminum storage rail and five\nnon-marring 1\/2-inch drive lug nut sockets in the following sizes: 17mm, 19mm\n(3\/4-inch), 21mm, 13\/16-inch, and 7\/8-inch. Set includes: a 1 5\/16-inch (33mm)\nPitman Arm Puller, a 1 1\/16-inch (27mm) Pitman Arm Puller, a 22mm Ball Joint\nSeparator, a 19mm Universal Tie Rod End Tool, and an Outer Tie Rod Remover\ntool. Includes: 1 pc. 30mm 12-point axle nut socket Includes Pickle Fork Ball\nJoint Separator Set includes one 1\/2-inch drive 1 7\/16-inch Pitman Arm\nAdjusting tool and four 1\/2-inch drive Tie Rod Adjusting Tools in the\nfollowing sizes: 3\/4-inch, 7\/8-inch, 1 1\/8-inch, and 1 13\/16-inch. Features\nThese lug nut sockets can be used with an impact wrench, air ratchet, breaker\nbar, or torque wrench. The set includes some of the most popular lug nut sizes\nand is a must have inside your car for tire changes, brake jobs, and more.\nThese impact sockets can be used with any 1\/2-inch drive hand wrenches,\nelectric, or pneumatic tools, and thanks to a total length of 3 3\/8 inches\n(8.6cm) and a hollow design, these sockets are great for removing longer\nbolts, as well. The press type ball joint separator allows for ball joint\nremoval without damage to boots and other parts that typical fork type\nremovers may cause damage to. The set also comes with a high quality storage\ncase. Engineered for use with impact drivers, this axle nut socket is extra\ndeep to fit various axle lengths, and its 12-point design prevents round-off\nwhile providing a thinner wall. This tool makes it easy to separate ball\njoints or even remove CV drive shafts on FWD vehicles. Just keep a grip on the\nknurled shaft and add extra force with a hammer as needed. The unique design\nallows for 360-degree rotation of the adjusting sleeve, even when space is\nlimited. This set comes in a convenient, blow-molded storage case, so you'll\nnever have to search for Pitman Arm or Tie Rod Adjusting Tool you need.\nQuality Made of high strength Chrome Molybdenum Steel, the Electro-Phosphate\nfinish combined with laser etched size markings provides a sleek look and high\nvisibility Made of high strength Chrome Molybdenum steel with a corrosion-\nresistant Manganese Phosphate coating, these 6-point, thin-walled, impact-\nready sockets feature a non-marring protective sleeve and insert to prevent\nscratches during use. The tools are constructed from high quality heat treated\ndrop forged steel to ensure longevity and durability over the lifetime of the\ntools. Made with the highest quality construction available, this set is great\nfor both amateurs and professionals. Made from high-strength, heat treated\nChrome Vanadium steel, this axle nut socket is high-torque, and the Manganese\nPhosphate coating resists corrosion. This tool meets and exceeds ANSI\/ASME\nstandards. Our 15\/16-inch ball joint separator is constructed from tempered\ndrop forged steel for enhanced durability and features a knurled handle to\nensure a steady grip during use. Constructed of Chrome-Moly steel with a\ncorrosion-resistant Manganese Phosphate Coating, these Pitman Arm and Tie Rod\nAdjusting tools will work with your favorite 1\/2-inch drive ratchet or flex\nbar for easy and convenient use.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eDESIGN CONSIDERATIONS: Engineered for use with impact drivers, this axle nut socket is extra deep to fit various axle lengths, and its 6-point opening grips the flat sides of fasteners, not corners, to prevent round-off.\u003c\/li\u003e\n \u003cli\u003eQUALITY: Made from high-strength, heat treated Chrome Vanadium steel, this axle nut socket is high-torque, and the Manganese Phosphate coating resists corrosion. This tool meets and exceeds ANSI\/ASME standards.\u003c\/li\u003e\n \u003cli\u003eCOMMON APPLICATIONS: This axle nut socket can be used for the removal or installation of axle nuts on front wheel drive vehicles and fits many late model GM vehicles. It's a must-have socket if you're doing any work on the front end that involves removing your wheel hub including wheel hub replacement, Upper\/Lower ball joint replacement, U-joint replacement, and more!\u003c\/li\u003e\n \u003cli\u003eRELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 6 Point Axle Nut Socket, simply contact customer service for troubleshooting help, parts, replacement, or refund.\u003c\/li\u003e\n \u003cli\u003eASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, were proud to help this great organization.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n\n\n"}